UPSGS2.5-35PH

UPSGS2.5-35PH

2.5 Module 17-4PH Stainless Steel (38-40HRC) Splined Ground Spur Gears 20° PA Quality Grade 4f24 DIN 3961/3967 (ISO 1328)

Product specifications

Quality DIN 3961 DIN39674f24
Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
Gear Tooth TypeSpur Ground
Normal Module mn2.5
Pressure Angle20°
No. of Teeth [z]35
Spline Din 5480 GearsN35x2.00x30x16x9H
Torque T₂ [Nm] n1 100 r/min337.60
Ref. Diameter [d]87.5
Tip Diameter [da]92.5
Hub Diameter [BD]55
Backlash (mm) jt.i (min)0.025
Backlash (mm) jt.e (max)0.101
Inertia [I] kgm²1.27 x 10-3
Mass [kg]1.43

Product specifications

Quality DIN 3961 DIN39674f24
Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
Gear Tooth TypeSpur Ground
Normal Module mn2.5
Pressure Angle20°
No. of Teeth [z]35
Spline Din 5480 GearsN35x2.00x30x16x9H
Torque T₂ [Nm] n1 100 r/min337.60
Ref. Diameter [d]87.5
Tip Diameter [da]92.5
Hub Diameter [BD]55
Backlash (mm) jt.i (min)0.025
Backlash (mm) jt.e (max)0.101
Inertia [I] kgm²1.27 x 10-3
Mass [kg]1.43