UPHGS3.0-26LPH

UPHGS3.0-26LPH

3.0 Module 17-4PH Stainless Steel (38-40HRC) 15 deg. Left Hand Helix Splined Ground Parallel Helical Gears 20° PA Quality Grade 4f24 DIN 3961/3967 (ISO 1328)

Product specifications

Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
Quality DIN 3961 DIN39674f24
Gear Tooth TypeHelical Ground
Helix DirectionLeft Hand
Helix Angle15°
Normal Module mn3
Pressure Angle20°
No. of Teeth [z]26
Torque T₂ [Nm] n1 500 r/min401.84
Ref. Diameter [d]80.75
Spline Din 5480 GearsN32x2.00x30x14x9H
Tip Diameter [da]86.75
Hub Diameter [BD]55
Backlash (mm) jt.i (min)0.027
Backlash (mm) jt.e (max)0.104
Inertia [I] kgm²1.14 x 10-3
Mass kg1.362

Product specifications

Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
Quality DIN 3961 DIN39674f24
Gear Tooth TypeHelical Ground
Helix DirectionLeft Hand
Helix Angle15°
Normal Module mn3
Pressure Angle20°
No. of Teeth [z]26
Torque T₂ [Nm] n1 500 r/min401.84
Ref. Diameter [d]80.75
Spline Din 5480 GearsN32x2.00x30x14x9H
Tip Diameter [da]86.75
Hub Diameter [BD]55
Backlash (mm) jt.i (min)0.027
Backlash (mm) jt.e (max)0.104
Inertia [I] kgm²1.14 x 10-3
Mass kg1.362