UPHGS3.0-25LH

UPHGS3.0-25LH

3.0 Module Case Hardened 805M20 (58-62HRC) 15 deg. Left Hand Helix Splined Ground Parallel Helical Gears 20° PA Quality Grade 4f24 DIN 3961/3967 (ISO 1328)

Product specifications

Material805M20, AISI 8620, EN 1.6523, 20NiCrMo2-2 Steel Case Hard 57Hrc
Quality DIN 3961 DIN39674f24
Gear Tooth TypeHelical Ground
Helix DirectionLeft Hand
Helix Angle15°
Normal Module mn3
Pressure Angle20°
No. of Teeth [z]25
Torque T₂ [Nm] n1 500 r/min460.45
Ref. Diameter [d]77.65
Spline Din 5480 GearsN32x2.00x30x14x9H
Tip Diameter [da]83.65
Hub Diameter [BD]55
Backlash (mm) jt.i (min)0.028
Backlash (mm) jt.e (max)0.102
Inertia [I] kgm²1.01 x 10-3
Mass kg1.283

Product specifications

Material805M20, AISI 8620, EN 1.6523, 20NiCrMo2-2 Steel Case Hard 57Hrc
Quality DIN 3961 DIN39674f24
Gear Tooth TypeHelical Ground
Helix DirectionLeft Hand
Helix Angle15°
Normal Module mn3
Pressure Angle20°
No. of Teeth [z]25
Torque T₂ [Nm] n1 500 r/min460.45
Ref. Diameter [d]77.65
Spline Din 5480 GearsN32x2.00x30x14x9H
Tip Diameter [da]83.65
Hub Diameter [BD]55
Backlash (mm) jt.i (min)0.028
Backlash (mm) jt.e (max)0.102
Inertia [I] kgm²1.01 x 10-3
Mass kg1.283