UPHGS2.0-28RPH

UPHGS2.0-28RPH

2.0 Module 17-4PH Stainless Steel (38-40HRC) 15 deg. Right Hand Helix Splined Ground Parallel Helical Gears 20° PA Quality Grade 4f24 DIN 3961/3967 (ISO 1328)

Product specifications

Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
Quality DIN 3961 DIN39674f24
Gear Tooth TypeHelical Ground
Helix DirectionRight Hand
Helix Angle15°
Normal Module mn2
Pressure Angle20°
No. of Teeth [z]28
Torque T₂ [Nm] n1 500 r/min135.64
Ref. Diameter [d]57.98
Spline Din 5480 GearsN20x1.25x30x14x9H
Tip Diameter [da]61.98
Hub Diameter [BD]35
Backlash (mm) jt.i (min)0.028
Backlash (mm) jt.e (max)0.102
Inertia [I] kgm²1.91 x 10-4
Mass kg0.459

Product specifications

Material17-4PH (EN1.4542 AISI 630) Stainless Steel H1025
Quality DIN 3961 DIN39674f24
Gear Tooth TypeHelical Ground
Helix DirectionRight Hand
Helix Angle15°
Normal Module mn2
Pressure Angle20°
No. of Teeth [z]28
Torque T₂ [Nm] n1 500 r/min135.64
Ref. Diameter [d]57.98
Spline Din 5480 GearsN20x1.25x30x14x9H
Tip Diameter [da]61.98
Hub Diameter [BD]35
Backlash (mm) jt.i (min)0.028
Backlash (mm) jt.e (max)0.102
Inertia [I] kgm²1.91 x 10-4
Mass kg0.459