Stainless Steel wire to DIN 17224 with plain surface finish.
Coiled: Right hand.
Ends: Wire up to 0.8mm squared and unground. Wire over 1.0mm squared and ground.
Loads: Load values shown are based on a service life of 50,000 cycles at 0.50 stress range.
For normal service, springs should not be compressed below L1.
Tolerances: All dimensions and forces to DIN2095 (Grade 2).
Maximum Operating Temperature: 260°C.
To determine the load at any working length use: Rate x Proposed Deflection.
Springs are slightly magnetised due to cold working during manufacture and may have a slight residue of Nickel on the surface of the wire.
This is normal and does not affect the function.
If the dimensions you require are not listed, please contact us for a quote as we are able to supply many more sizes on request