Material

• Plastic iglidur® W300 which offers especially long service life.
• Low coefficient of friction.
• Extremely high wear resistance and good resistance to dirt.

Performance

Density: 1.24g/cm3. Max Moisture Absorption at 23°C/50% r.h.: 1.3% of weight. Max Moisture Absorption: 6.5% of weight. Max Dry PV Value: 0.23 MPa • m/s. Modulus of Elasticity: 3,500 MPa. Tensile Strength at +20°C: 125 MPa. Compressive Strength: 61 MPa. Shore D Hardness: 77. Max. Long Term Application Temp.: +90°C. Max. Short Term Application Temp.: +180°C. Min. Application Temp.: -40°C. Thermal Conductivity: 0.24 W/m•K. Coefficiant of Thermal Expansion at +23°C: 9 K-1 • 10-5. Specific Volume Resistance: >1013 Ωcm. Surface Resistance: >1012 Ω.

Options

• Some sizes available in iglidur® A180 FDA approved material on request.
• Anti-Backlash nuts available.