• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

PSG : 1.5 Module Cast Iron Precision Spur Gears

Precision Gears » Precision Spur Gears »
1.5 Module Cast Iron Precision Spur Gears 20 deg. PA
Quality Grade 8e25 DIN 3961/3967 (AGMA Q10)

1.5 Module Steel Precision Spur Gears 20° PA Quality Grade 7e25 DIN 3961 (AGMA Q10)

Discounts 1+ 0% 6+ 5% 19+ 10%

Part
Number		 No. of
Teeth
Z		 Ref.
Dia.
d		 Tip
Dia.
da		 Bore
H7
di		 Max
Bore
di		 Hub
Dia.
BD		 Backlash
(mm)
jt.e (max)		 Backlash
(mm)
jt.i (min)		 I
Inertia
kgm2
Mass
kg		 T2 Nm
n2100min-1		 Cost Quantity Add to
Basket
PSG1.5-18CI 18 27.0 30.0 6 12 22 0.128 0.052 8.30 x 10-6 0.096 2.47 £17.55
PSG1.5-19CI 19 28.5 31.5 6 12 22 0.128 0.052 9.67 x 10-6 0.103 2.61 £18.21
PSG1.5-20CI 20 30.0 33.0 6 12 22 0.128 0.052 1.13 x 10-5 0.110 3.47 £19.13
PSG1.5-21CI 21 31.5 34.5 8 14 25 0.129 0.051 1.47 x 10-5 0.125 3.64 £19.29
PSG1.5-22CI 22 33.0 36.0 8 14 25 0.129 0.051 1.68 x 10-5 0.133 3.82 £19.51
PSG1.5-23CI 23 34.5 37.5 8 14 25 0.129 0.051 1.93 x 10-5 0.142 3.99 £19.86
PSG1.5-24CI 24 36.0 39.0 8 14 25 0.129 0.051 2.21 x 10-5 0.151 4.16 £20.05
PSG1.5-25CI 25 37.5 40.5 8 14 25 0.129 0.051 2.52 x 10-5 0.160 4.34 £21.09
PSG1.5-26CI 26 39.0 42.0 8 14 25 0.129 0.051 2.87 x 10-5 0.170 5.31 £22.10
PSG1.5-27CI 27 40.5 43.5 8 14 25 0.129 0.051 3.27 x 10-5 0.180 5.51 £22.80
PSG1.5-28CI 28 42.0 45.0 8 14 25 0.129 0.051 3.71 x 10-5 0.190 5.72 £23.44
PSG1.5-29CI 29 43.5 46.5 10 20 35 0.129 0.051 5.37 x 10-5 0.246 5.92 £23.81
PSG1.5-30CI 30 45.0 48.0 10 20 35 0.129 0.051 5.92 x 10-5 0.257 6.74 £24.52
PSG1.5-32CI 32 48.0 51.0 10 20 35 0.129 0.051 7.19 x 10-5 0.280 7.19 £25.36
PSG1.5-35CI 35 52.5 55.5 10 20 35 0.171 0.069 9.59 x 10-5 0.318 7.86 £26.17
PSG1.5-38CI 38 57.0 60.0 12 25 45 0.171 0.069 1.54 x 10-4 0.420 8.53 £28.66
PSG1.5-40CI 40 60.0 63.0 12 25 45 0.171 0.069 1.80 x 10-4 0.450 10.05 £29.82
PSG1.5-42CI 42 63.0 66.0 12 25 45 0.171 0.069 2.09 x 10-4 0.481 10.55 £29.95
PSG1.5-45CI 45 67.5 70.5 12 25 45 0.171 0.069 2.62 x 10-4 0.530 11.31 £30.60
PSG1.5-48CI 48 72.0 75.0 12 25 45 0.171 0.069 3.26 x 10-4 0.583 12.06 £32.69
PSG1.5-50CI 50 75.0 78.0 14 30 55 0.171 0.069 4.29 x 10-4 0.697 13.63 £36.54
PSG1.5-52CI 52 78.0 81.0 14 30 55 0.171 0.069 4.86 x 10-4 0.735 14.18 £38.40
PSG1.5-55CI 55 82.5 85.5 14 30 55 0.173 0.067 5.83 x 10-4 0.796 14.99 £39.36
PSG1.5-58CI 58 87.0 90.0 14 30 55 0.173 0.067 6.99 x 10-4 0.861 15.81 £40.26
PSG1.5-60CI 60 90.0 93.0 14 30 55 0.173 0.067 7.86 x 10-4 0.906 17.03 £40.63
PSG1.5-62CI 62 93.0 96.0 14 30 55 0.173 0.067 8.83 x 10-4 0.952 17.60 £41.44
PSG1.5-65CI 65 97.5 100.5 14 30 55 0.173 0.067 1.05 x 10-3 1.024 18.45 £43.00
PSG1.5-68CI 68 102.0 105.0 16 40 65 0.173 0.067 1.33 x 10-3 1.192 19.30 £45.60
PSG1.5-70CI 70 105.0 108.0 16 40 65 0.173 0.067 1.47 x 10-3 1.244 19.87 £47.26
PSG1.5-72CI 72 108.0 111.0 16 40 65 0.173 0.067 1.62 x 10-3 1.298 20.44 £49.95
PSG1.5-75CI 75 112.5 115.5 16 40 65 0.173 0.067 1.87 x 10-3 1.382 21.29 £53.25
PSG1.5-78CI 78 117.0 120.0 16 40 65 0.173 0.067 2.16 x 10-3 1.470 22.14 £56.11
PSG1.5-80CI 80 120.0 123.0 16 40 65 0.173 0.067 2.37 x 10-3 1.530 23.81 £58.19
PSG1.5-82CI 82 123.0 126.0 16 40 65 0.175 0.065 2.60 x 10-3 1.591 24.41 £60.86
PSG1.5-85CI 85 112.5 115.5 16 40 65 0.227 0.097 2.97 x 10-3 1.687 25.30 £64.17
PSG1.5-88CI 88 117.0 120.0 16 40 65 0.227 0.097 3.38 x 10-3 1.785 26.19 £67.35
PSG1.5-90CI 90 120.0 123.0 16 40 65 0.227 0.097 3.68 x 10-3 1.853 26.79 £70.74
PSG1.5-92CI 92 123.0 126.0 16 40 65 0.227 0.097 4.01 x 10-3 1.923 27.38 £74.28
PSG1.5-95CI 95 112.5 115.5 16 40 65 0.227 0.097 4.53 x 10-3 2.029 28.28 £77.98
PSG1.5-98CI 98 117.0 120.0 16 40 65 0.227 0.097 5.10 x 10-3 2.140 29.17 £81.89

DIN 3967 Tooth Thickness tol.
n Efficiency approx. 98%

Standard Part

 PSG

1.5

-

50

CI

     

·

  

·

  

·

  

·

  

·

  

·

  

Modified Part PSG

1.5

-

50

CI

16

K

T

PSG - Precision Spur Gear
Quality Grade 8e25 DIN 3961/3967
Other Quality Grades available.
See Technical Pages

T = 1 x Tapped hole 2T = 2 x Tapped holes.
P = 1 x Pin Hole PT = 1 x Pin Hole thru.
All threads metric as standard.
For sizes and prices see Technical Pages

mn Module - Cut with DIN 867 1.25/0.20/1.0
Ref. Tooth Profile Topping WD = 2.25 x mn

K- Keyway supplied to
DIN 6885 - Js9 tolerance.
For prices see Technical Pages

Number of Teeth z

To specify different bore enter size required
Example: 16 = 16mm H7 etc
For prices see Technical Pages

Standard Material = Cast Iron GG25

Options
- Different number of teeth
- Modifications available on request: Other material, boring out, keyways, tapped holes, pin holes.

Accessories
- Clamping sets, screws, keys, dowel pins...

Downloads
 PDF Icon PDF Documents : Catalogue Page | Cast Iron Precision Spur Gears | Full Range of Precision Spur Gears | Technical Pages

Sign in, or register: Why register? | Forgot password?