Ondrives: Precision Gears - Precision Spur Gears

PSG : 0.5 Module Stainless Precision Spur Gears

Precision Gears » Precision Spur Gears »
0.5 Module Stainless Precision Spur Gears 20 deg. PA - Quality Grade 7e DIN 58405 (AGMA Q10)

0.5 Module Stainless Precision Spur Gears 20° PA Quality Grade 7e DIN 58405 (AGMA Q10)

Discounts

1+ 0%

6+ 5%

19+ 10%

Part Number	No. of Teeth Z	Ref. Dia. d	Tip Dia. d_a	Bore H7 d_i	Max Bore d_i	Hub Dia. B_D	Backlash (mm) j_t.e (max)	Backlash (mm) j_t.i (min)	I Inertia kgm²	Mass kg	Stainless 303				Stainless 316
Part Number	No. of Teeth Z	Ref. Dia. d	Tip Dia. d_a	Bore H7 d_i	Max Bore d_i	Hub Dia. B_D	Backlash (mm) j_t.e (max)	Backlash (mm) j_t.i (min)	I Inertia kgm²	Mass kg	T₂ Nm n₂100min^-1	Cost PSG-S	Quantity	Add to Basket	T₂ Nm n₂100min^-1	Cost PSG-SL	Quantity	Add to Basket
PSG0.5-18S	18	9.0	10.0	3	3	7	0.083	0.029	4.38 x 10^-8	0.005	0.15	£13.96			0.12	£16.02
PSG0.5-19S	19	9.5	10.5	4	4	8	0.076	0.037	6.10 x 10^-8	0.005	0.16	£14.11			0.12	£16.21
PSG0.5-20S	20	10.0	11.0	4	4	8	0.076	0.037	6.81 x 10^-8	0.006	0.21	£14.39			0.17	£16.52
PSG0.5-21S	21	10.5	11.5	4	4	8	0.077	0.036	7.64 x 10^-8	0.006	0.22	£14.53			0.17	£16.68
PSG0.5-22S	22	11.0	12.0	4	4	8	0.077	0.036	8.60 x 10^-8	0.006	0.23	£14.72			0.18	£16.90
PSG0.5-23S	23	11.5	12.5	4	4	8	0.077	0.036	9.69 x 10^-8	0.006	0.25	£14.90			0.19	£17.10
PSG0.5-24S	24	12.0	13.0	5	5	10	0.077	0.036	1.51 x 10^-7	0.008	0.26	£15.07			0.20	£17.30
PSG0.5-25S	25	12.5	13.5	5	5	10	0.087	0.042	1.65 x 10^-7	0.009	0.27	£15.23			0.21	£17.49
PSG0.5-26S	26	13.0	14.0	5	5	10	0.087	0.042	1.81 x 10^-7	0.009	0.33	£15.45			0.25	£17.74
PSG0.5-27S	27	13.5	14.5	5	5	10	0.087	0.042	1.98 x 10^-7	0.009	0.34	£15.61			0.26	£17.92
PSG0.5-28S	28	14.0	15.0	5	5	10	0.087	0.042	2.18 x 10^-7	0.010	0.35	£15.77			0.27	£18.10
PSG0.5-29S	29	14.5	15.5	6	6	13	0.087	0.042	3.76 x 10^-7	0.013	0.36	£15.86			0.28	£18.22
PSG0.5-30S	30	15.0	16.0	6	6	13	0.087	0.042	4.00 x 10^-7	0.014	0.41	£15.93			0.32	£18.29
PSG0.5-32S	32	16.0	17.0	6	6	13	0.087	0.042	4.57 x 10^-7	0.015	0.44	£16.31			0.34	£18.73
PSG0.5-35S	35	17.5	18.5	6	6	13	0.087	0.042	5.65 x 10^-7	0.016	0.48	£16.86			0.38	£19.36
PSG0.5-38S	38	19.0	20.0	6	8	17	0.089	0.041	1.13 x 10^-7	0.026	0.52	£17.37			0.41	£19.94
PSG0.5-40S	40	20.0	21.0	6	8	17	0.089	0.041	1.24 x 10^-6	0.027	0.71	£17.75			0.55	£20.39
PSG0.5-42S	42	21.0	22.0	6	8	17	0.089	0.041	1.37 x 10^-6	0.028	0.74	£18.07			0.58	£20.75
PSG0.5-45S	45	22.5	23.5	6	8	17	0.089	0.041	1.61 x 10^-6	0.030	0.79	£18.63			0.62	£21.39
PSG0.5-48S	48	24.0	25.0	6	8	17	0.089	0.041	1.90 x 10^-6	0.032	0.85	£19.36			0.66	£22.22
PSG0.5-50S	50	25.0	26.0	6	8	17	0.089	0.041	2.12 x 10^-6	0.034	1.05	£19.56			0.81	£22.47
PSG0.5-52S	52	26.0	27.0	6	8	17	0.097	0.046	2.38 x 10^-6	0.035	1.09	£19.85			0.85	£22.80
PSG0.5-55S	55	27.5	28.5	6	8	17	0.097	0.046	2.81 x 10^-6	0.038	1.15	£20.26			0.90	£23.26
PSG0.5-58S	58	29.0	30.0	6	8	17	0.097	0.046	3.33 x 10^-6	0.040	1.21	£20.68			0.94	£23.74
PSG0.5-60S	60	30.0	31.0	6	8	17	0.097	0.046	3.72 x 10^-6	0.042	1.49	£20.90			1.16	£23.99
PSG0.5-62S	62	31.0	32.0	8	10	20	0.098	0.044	4.72 x 10^-6	0.048	1.54	£21.15			1.20	£24.29
PSG0.5-65S	65	32.5	33.5	8	10	20	0.098	0.044	5.45 x 10^-6	0.051	1.62	£21.61			1.26	£24.82
PSG0.5-68S	68	34.0	35.0	8	10	20	0.098	0.044	6.29 x 10^-6	0.054	1.69	£21.76			1.32	£24.98
PSG0.5-70S	70	35.0	36.0	8	10	20	0.098	0.044	6.92 x 10^-6	0.056	1.74	£21.99			1.36	£25.25
PSG0.5-72S	72	36.0	37.0	8	10	20	0.098	0.044	7.61 x 10^-6	0.058	1.79	£22.20			1.39	£25.49
PSG0.5-75S	75	37.5	38.5	8	10	20	0.098	0.044	8.75 x 10^-6	0.062	1.87	£22.37			1.45	£25.69
PSG0.5-78S	78	39.0	40.0	8	10	20	0.098	0.044	1.00 x 10^-5	0.065	1.94	£22.70			1.51	£26.06
PSG0.5-80S	80	40.0	41.0	8	12	25	0.098	0.044	1.28 x 10^-5	0.082	2.55	£22.87			1.98	£26.26
PSG0.5-82S	82	41.0	42.0	8	12	25	0.098	0.044	1.38 x 10^-5	0.084	2.61	£23.11			2.03	£26.55
PSG0.5-85S	85	42.5	43.5	8	12	25	0.098	0.044	1.54 x 10^-5	0.088	2.71	£23.35			2.11	£26.81
PSG0.5-90S	90	45.0	46.0	8	12	25	0.098	0.044	1.86 x 10^-5	0.095	2.87	£23.74			2.23	£27.26
PSG0.5-95S	95	47.5	48.5	8	12	25	0.098	0.044	2.24 x 10^-5	0.102	3.03	£23.98			2.36	£27.53
PSG0.5-100S	100	50.0	51.0	10	16	30	0.098	0.044	3.00 x 10^-5	0.123	3.84	£24.09			2.99	£27.66
PSG0.5-105S	105	52.5	53.5	10	16	30	0.111	0.049	3.52 x 10^-5	0.131	4.04	£24.41			3.14	£28.02
PSG0.5-110S	110	55.0	56.0	10	16	30	0.111	0.049	4.12 x 10^-5	0.139	4.23	£24.65			3.29	£28.31
PSG0.5-115S	115	57.5	58.5	10	16	30	0.111	0.049	4.80 x 10^-5	0.148	4.42	£24.91			3.44	£28.59
PSG0.5-120S	120	60.0	61.0	10	20	35	0.111	0.049	6.11 x 10^-5	0.177	4.61	£29.19			3.59	£33.51
PSG0.5-130S	130	65.0	66.0	10	20	35	0.111	0.049	7.98 x 10^-5	0.196	5.00	£33.48			3.89	£38.44
PSG0.5-140S	140	70.0	71.0	10	20	35	0.111	0.049	1.03 x 10^-4	0.217	5.38	£34.88			4.19	£40.04
PSG0.5-150S	150	75.0	76.0	10	25	40	0.111	0.049	1.41 x 10^-4	0.262	7.79	£37.97			6.06	£43.60
PSG0.5-160S	160	80.0	81.0	10	25	40	0.111	0.049	1.77 x 10^-4	0.286	8.30	£39.94			6.46	£45.85
PSG0.5-170S	170	85.0	86.0	10	25	40	0.113	0.047	2.20 x 10^-4	0.312	8.82	£42.18			6.86	£48.44
PSG0.5-180S	180	90.0	91.0	14	30	50	0.113	0.047	2.99 x 10^-4	0.385	9.34	£42.88			7.27	£49.23
PSG0.5-190S	190	95.0	96.0	14	30	50	0.113	0.047	3.60 x 10^-4	0.414	9.86	£44.99			7.67	£51.65
PSG0.5-200S	200	100.0	101.0	14	30	50	0.113	0.047	4.31 x 10^-4	0.444	11.61	£46.80			9.03	£53.74
PSG0.5-210S	210	105.0	106.0	14	30	50	0.134	0.064	5.14 x 10^-4	0.475	12.19	£48.20			9.48	£55.35
PSG0.5-220S	220	110.0	111.0	16	40	60	0.134	0.064	6.61 x 10^-4	0.570	12.77	£51.04			9.93	£58.61
PSG0.5-230S	230	115.0	116.0	16	40	60	0.134	0.064	7.71 x 10^-4	0.605	13.35	£52.66			10.38	£60.46
PSG0.5-240S	240	120.0	121.0	16	40	60	0.134	0.064	8.95 x 10^-4	0.641	13.93	£54.62			10.83	£62.70
PSG0.5-250S	250	125.0	126.0	16	40	60	0.136	0.062	1.04 x 10^-3	0.679	14.51	£56.14			11.29	£64.46

DIN 58405 Tooth Thickness tol.
n Efficiency approx. 98%

Standard Part

PSG

0.5

Modified Part

PSG

0.5

PSG - Precision Spur Gear
Quality Grade 7e DIN 58405
Other Quality Grades available.
See Technical Pages

T = 1 x Tapped hole 2T = 2 x Tapped holes.
P = 1 x Pin Hole PT = 1 x Pin Hole thru.
All threads metric as standard.
For sizes and prices see Technical Pages

m_n Module - Cut with DIN 867 1.25/0.20/1.0
Ref. Tooth Profile Topping WD = 2.25 x m_n

K- Keyway supplied to
DIN 6885 - Js9 tolerance.
For prices see Technical Pages

Number of Teeth z

To specify different bore enter size required
Example: 8 = 8mm H7 etc
For prices see Technical Pages

Standard Material = 817M40T (28HRC)
H = 805M20 Case Hardened (58HRC)
S = 303 Stainless Steel
SL = 316 Stainless Steel

Options
- Different number of teeth
- Modifications available on request: Other material, boring out, keyways, tapped holes, pin holes.

Accessories
- Clamping sets, screws, keys, dowel pins...

Downloads
PDF Documents : Catalogue Page | Full Range of Precision Spur Gears | Technical Pages