PGRR & PGRS : 3.0 Module Precision Spur Gear Racks
Precision Gears » Precision Gear Racks »3.0 Module Spur Gear Rack 20 deg. PA - Quality Grade 8 ISO 1328
| Discounts | 1+ 0% | 10+ 5% | 25+ 10% |
| Part Number |
Height H±0.05 |
Pitch. Height P |
Width W±0.05 |
Diameter Ød h6 |
Length A | Length B | ||||||
|
Length A±0.25 |
Price | Quantity |
Add to Basket |
Length B±0.1 |
Price | Quantity | Add to Basket |
|||||
| PGRR3.0-400 | 27 | 24 | - | 30 | 400 | £222.44 |
|
395 | £239.49 |
|
||
| PGRS3.0-600 | 30 | 27 | 30 | - | 600 | £99.21 |
|
593 | £116.28 |
|
||
| PGRS3.0-1200 | 30 | 27 | 30 | - | 1200 | £169.21 |
|
1196 | £186.28 |
|
||
| Standard Part | PGRR | 3.0 | - | 400 | A | |||||
| PGRR - Precision Round Gear Rack PGRS - Precision Square Gear Rack |
Length Type: A = Full Length B = Cut for Butt Joining |
|||||||||
| mn Module - Cut with DIN 867 1.25/0.20/1.0 | Length |
Material
PGRR (Round Rack): 303 Stainless Steel
PGRS (Square Rack): 080A47 Steel
Performance
PGRR (Round Rack): Straightness: 0.5mm/400mm. Total Pitch Deviation: 0.10mm. Surface Finish on Diameter: 0.4Ra.
PGRS (Square Rack): Straightness: 1.0mm/1000mm. Total Pitch Deviation: 0.10mm.
Other Info.
All racks are cut starting at half tooth spacing. Racks cut for butt joining finish at half tooth spacing.
Joining gauges are available.
Other lengths available - P.O.A.
Downloads
PDF Documents : Catalogue Page | Full Range of Precision Gear Racks | Technical Pages
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login