• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

PSG : 0.8 Module Skive Hobbed Precision Spur Gears

Precision Gears » Precision Spur Gears »
0.8 Module Skive Hobbed Precision Spur Gears 20 deg. PA
Quality Grade 6e DIN 3961/58405 (AGMA Q11)

0.8 Module Skive Hobbed Precision Spur Gears 20° PA Quality Grade 6e DIN 58405 (AGMA Q11)

Discounts 1+ 0% 6+ 5% 19+ 10%

Part
Number		 No. of
Teeth
Z		 Ref.
Dia.
d		 Tip
Dia.
da		 Bore
H7
di		 Max
Bore
di		 Hub
Dia.
BD		 Keyway Backlash
(mm)
jt.e (max)		 Backlash
(mm)
jt.i (min)		 I
Inertia
kgm2
Mass
kg		 T2 Nm
n2100min-1		 Cost Quantity Add to
Basket
PSG0.8-18HC 18 14.4 16.0 5 6 11 - 0.030 0.066 4.23 x 10-7 0.016 3.46 £28.90
PSG0.8-19HC 19 15.2 16.8 5 6 11 - 0.030 0.066 4.94 x 10-7 0.018 3.65 £29.33
PSG0.8-20HC 20 16.0 17.6 5 6 11 - 0.030 0.066 5.78 x 10-7 0.019 4.53 £29.76
PSG0.8-21HC 21 16.8 18.4 5 6 12 - 0.030 0.066 7.27 x 10-7 0.022 4.76 £30.70
PSG0.8-22HC 22 17.6 19.2 5 6 12 - 0.030 0.066 8.39 x 10-7 0.024 4.98 £31.14
PSG0.8-23HC 23 18.4 20.0 5 6 12 - 0.029 0.067 9.67 x 10-7 0.025 5.21 £31.29
PSG0.8-24HCK 24 19.2 20.8 6 8 14 2 0.029 0.067 1.25 x 10-7 0.029 5.44 £31.46
PSG0.8-25HCK 25 20.0 21.6 6 8 14 2 0.029 0.067 1.42 x 10-6 0.031 5.66 £32.77
PSG0.8-26HCK 26 20.8 22.4 6 8 14 2 0.029 0.067 1.60 x 10-6 0.033 5.90 £33.94
PSG0.8-27HCK 27 21.6 23.2 6 8 14 2 0.029 0.067 1.81 x 10-6 0.034 6.13 £34.64
PSG0.8-28HCK 28 22.4 24.0 8 10 18 2 0.029 0.067 2.57 x 10-6 0.042 6.35 £35.42
PSG0.8-29HCK 29 23.2 24.8 8 10 18 2 0.029 0.067 2.83 x 10-6 0.044 6.58 £36.34
PSG0.8-30HCK 30 24.0 25.6 8 10 18 2 0.029 0.067 3.12 x 10-6 0.046 6.76 £36.95
PSG0.8-32HCK 32 25.6 27.2 8 10 18 2 0.035 0.078 3.79 x 10-6 0.050 7.21 £37.91
PSG0.8-35HCK 35 28.0 29.6 10 12 20 3 0.035 0.078 5.43 x 10-6 0.058 7.89 £39.19
PSG0.8-38HCK 38 30.4 32.0 10 12 20 3 0.033 0.079 7.06 x 10-6 0.065 8.57 £40.78
PSG0.8-40HCK 40 32.0 33.6 10 12 20 3 0.033 0.079 8.38 x 10-6 0.071 10.03 £42.28
PSG0.8-42HCK 42 33.6 35.2 10 12 20 3 0.033 0.079 9.92 x 10-6 0.077 10.53 £42.59
PSG0.8-45HCK 45 36.0 37.6 10 12 20 3 0.033 0.079 1.27 x 10-5 0.086 11.28 £43.21
PSG0.8-48HCK 48 38.4 40.0 10 18 30 3 0.033 0.079 2.16 x 10-5 0.130 12.04 £43.56
PSG0.8-50HCK 50 40.0 41.6 10 18 30 3 0.033 0.079 2.43 x 10-5 0.137 13.61 £48.09
PSG0.8-52HCK 52 41.6 43.2 10 18 30 3 0.033 0.079 2.72 x 10-5 0.144 14.15 £49.52
PSG0.8-55HCK 55 44.0 45.6 10 18 30 3 0.033 0.079 3.24 x 10-5 0.155 14.97 £51.58
PSG0.8-58HCK 58 46.4 48.0 10 18 30 3 0.033 0.079 3.84 x 10-5 0.167 15.78 £53.14
PSG0.8-60HCK 60 48.0 49.6 10 25 40 3 0.033 0.079 5.80 x 10-5 0.223 17.00 £54.37
PSG0.8-62HCK 62 49.6 51.2 10 25 40 3 0.033 0.079 6.31 x 10-5 0.232 17.57 £56.15
PSG0.8-65HCK 65 52.0 53.6 10 25 40 3 0.038 0.092 7.17 x 10-5 0.245 18.42 £60.18
PSG0.8-68HCK 68 54.4 56.0 10 25 40 3 0.038 0.092 8.15 x 10-5 0.259 19.27 £63.27
PSG0.8-70HCK 70 56.0 57.6 10 25 40 3 0.038 0.092 8.89 x 10-5 0.269 19.83 £64.59
PSG0.8-72HCK 72 57.6 59.2 10 25 40 3 0.038 0.092 9.69 x 10-5 0.279 20.40 £65.98
PSG0.8-75HCK 75 60.0 61.6 10 30 50 3 0.038 0.092 1.42 x 10-4 0.356 21.25 £70.39
PSG0.8-78HCK 78 62.4 64.0 10 30 50 3 0.038 0.092 1.57 x 10-4 0.372 22.10 £71.45
PSG0.8-80HCK 80 64.0 65.6 10 30 50 3 0.038 0.092 1.68 x 10-4 0.383 23.77 £72.90
PSG0.8-82HCK 82 65.6 67.2 10 30 50 3 0.038 0.092 1.80 x 10-4 0.395 24.36 £73.94
PSG0.8-85HCK 85 68.0 69.6 10 30 50 3 0.038 0.092 1.99 x 10-4 0.412 25.25 £75.53
PSG0.8-90HCK 90 72.0 73.6 10 40 65 3 0.038 0.092 3.37 x 10-4 0.562 26.74 £77.96
PSG0.8-95HCK 95 76.0 77.6 10 40 65 3 0.038 0.092 3.81 x 10-4 0.594 28.22 £86.31
PSG0.8-100HCK 100 80.0 81.6 14 40 65 5 0.038 0.092 4.32 x 10-4 0.616 30.39 £87.45
PSG0.8-110HCK 110 88.0 89.6 14 40 70 5 0.036 0.094 6.15 x 10-4 0.736 31.91 £109.47
PSG0.8-120HCK 120 96.0 97.6 14 40 70 5 0.036 0.094 7.86 x 10-4 0.817 33.43 £123.80

DIN 58405 Tooth Thickness tol.
# Quality Grades and Tolerances stated prior to heat treatment processes.
n Efficiency approx. 98%

Standard Part PSG 0.8 - 50 HC    
· · · · · ·
Modified Part PSG 0.8 - 50 HCK 12 T
PSG - Precision Spur Gear
Quality Grade 6e DIN 58405
Other Quality Grades available.
See Technical Pages		 T = 1 x Tapped hole 2T = 2 x Tapped holes.
P = 1 x Pin Hole PT = 1 x Pin Hole thru.
All threads metric as standard.
see Technical Pages
mn Module - Cut with DIN 867 1.25/0.20/1.0
Ref. Tooth Profile Topping WD = 2.25 x mn		 To specify different bore enter size required
Example: 12 = 12mm H7 etc
see Technical Pages
Number of Teeth z Standard material = 805M20 (58HRC)
Skive Hobbed

Options
- Different number of teeth
- Modifications available on request: Other material, boring out, keyways, tapped holes, pin holes.

Accessories
- Clamping sets, screws, keys, dowel pins...

Downloads
PDF Icon PDF Documents : Catalogue Page | Skive Hobbed Precision Spur Gears | Full Range of Precision Spur Gears | Technical Pages

Sign in, or register: Why register? | Forgot password?