• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

PHG : 2.0 Module Case Hard Precision Parallel Helical Gears

Precision Gears » Precision Parallel Helical Gears »
2.0 Module 15 deg. Case Hard Parallel Helical Gear 20 deg. PA - Quality Grade 7e25 DIN 3961 (AGMA Q10)

2.0 Module 15° Case Hard Precision Parallel Helical Gear 20° PA Quality Grade 7e25 DIN 3961 (AGMA Q10)
Discounts 1+ 0% 6+ 5% 19+ 10%

Part
Number		 No. of
Teeth
Z		 Ref.
Dia.
d		 Tip
Dia.
da		 Bore
H7
di		 Max
Bore
di		 Hub
Dia.
BD		 Backlash
(mm)
jt.e (max)		 Backlash
(mm)
jt.i (min)		 I
Inertia
kgm2		 Mass
kg		 T2 Nm
n2100min-1		 Right Hand Helix Left Hand Helix
PHG-RH Quantity Add to
Basket		 PHG-LH Quantity Add to
Basket
PHG2.0-15H 15 31.06 35.06 10 12 25 0.134 0.053 2.09 x 10-5 0.170 35.65 £35.90
£35.90
PHG2.0-16H 16 33.13 37.13 10 12 25 0.134 0.053 2.52 x 10-5 0.186 38.03 £37.68
£37.68
PHG2.0-17H 17 35.20 39.20 10 12 25 0.134 0.053 3.03 x 10-5 0.203 40.41 £38.47
£38.47
PHG2.0-18H 18 37.27 41.27 10 12 25 0.134 0.053 3.64 x 10-5 0.222 42.79 £39.44
£39.44
PHG2.0-19H 19 39.34 43.34 10 12 25 0.134 0.053 4.36 x 10-5 0.241 45.16 £40.45
£40.45
PHG2.0-20H 20 41.41 45.41 10 12 25 0.134 0.053 5.20 x 10-5 0.261 60.51 £41.28
£41.28
PHG2.0-21H 21 43.48 47.48 12 20 35 0.134 0.053 7.86 x 10-5 0.346 63.53 £42.39
£42.39
PHG2.0-22H 22 45.55 49.55 12 20 35 0.134 0.053 8.98 x 10-5 0.368 66.56 £43.14
£43.14
PHG2.0-23H 23 47.62 51.62 12 20 35 0.134 0.053 1.03 x 10-4 0.392 69.58 £44.03
£44.03
PHG2.0-24H 24 49.69 53.69 12 20 35 0.134 0.053 1.17 x 10-4 0.416 72.61 £44.96
£44.96
PHG2.0-25H 25 51.76 55.76 12 20 35 0.177 0.072 1.34 x 10-4 0.442 75.63 £47.56
£47.56
PHG2.0-26H 26 53.83 57.83 12 20 35 0.177 0.072 1.53 x 10-4 0.469 98.97 £48.97
£48.97
PHG2.0-27H 27 55.90 59.90 12 20 35 0.177 0.072 1.73 x 10-4 0.497 102.78 £50.64
£50.64
PHG2.0-28H 28 57.98 61.98 14 25 45 0.177 0.072 2.36 x 10-4 0.611 106.58 £51.80
£51.80
PHG2.0-29H 29 60.05 64.05 14 25 45 0.177 0.072 2.62 x 10-4 0.641 110.39 £53.04
£53.04
PHG2.0-30H 30 62.12 66.12 14 25 45 0.177 0.072 2.91 x 10-4 0.672 130.15 £54.20
£54.20
PHG2.0-32H 32 66.26 70.26 14 25 45 0.177 0.072 3.58 x 10-4 0.737 138.83 £58.91
£58.91
PHG2.0-35H 35 72.47 76.47 14 25 45 0.177 0.072 4.85 x 10-4 0.843 151.84 £65.08
£65.08
PHG2.0-38H 38 78.68 82.68 16 30 50 0.177 0.072 6.82 x 10-4 1.001 164.86 £71.40
£71.40
PHG2.0-40H 40 82.82 86.82 16 30 50 0.179 0.070 8.15 x 10-4 1.083 194.48 £74.37
£74.37
PHG2.0-42H 42 86.96 90.96 16 30 50 0.179 0.070 9.70 x 10-4 1.169 204.20 £76.64
£76.64
PHG2.0-45H 45 93.17 97.17 16 30 50 0.179 0.070 1.25 x 10-3 1.307 218.79 £80.01
£80.01
PHG2.0-48H 48 99.39 103.39 18 35 60 0.179 0.070 1.69 x 10-3 1.572 233.37 £86.18
£86.18
PHG2.0-50H 50 103.53 107.53 18 35 60 0.179 0.070 1.95 x 10-3 1.675 263.79 £92.24
£92.24
PHG2.0-52H 52 107.67 111.67 18 35 60 0.179 0.070 2.25 x 10-3 1.783 274.34 £95.72
£95.72
PHG2.0-55H 55 113.88 117.88 18 35 60 0.179 0.070 2.77 x 10-3 1.952 290.17 £108.05
£108.05
PHG2.0-58H 58 120.09 124.09 20 40 70 0.181 0.068 3.54 x 10-3 2.272 306.00 £114.61
£114.61
PHG2.0-60H 60 124.23 128.23 20 40 70 0.181 0.068 4.01 x 10-3 2.396 329.60 £117.53
£117.53
PHG2.0-62H 62 128.37 132.37 20 40 70 0.235 0.101 4.52 x 10-3 2.524 340.59 £120.35
£120.35

DIN 3967 Tooth Thickness tol.
n Efficiency approx. 98%

Standard Part PHG 2.0 - 50 R        
      ·   ·   ·   ·   ·   ·  
Modified Part PHG 2.0 - 50 L H 20 K T
PHG - Precision Helical Gear
Quality Grade 7e25 DIN 3961/3967
Other Quality Grades available.
See Technical Pages 		T = 1 x Tapped hole 2T = 2 x Tapped holes.
P = 1 x Pin Hole PT = 1 x Pin Hole thru.
All threads metric as standard.
For sizes and prices see Technical Pages
mn Module - Cut with DIN 867 1.25/0.20/1.0
Ref. Tooth Profile Topping WD = 2.25 x mn 		K- Keyway supplied to
DIN 6885 - Js9 tolerance.
For prices see Technical Pages
Number of Teeth z To specify different bore enter size required
Example: 20 = 20mm H7 etc
For prices see Technical Pages
Right Hand Helix (R) runs with
Left Hand Helix (L) 		Standard Material = 817M40T (28HRC)
H = 805M20 Case Hardened (58HRC)#
Options
 - Different number of teeth
- Modifications available on request: Other material, boring out, keyways, tapped holes, pin holes.Accessories
- Clamping sets, screws, keys, dowel pins...Downloads
PDF Icon PDF Documents : Catalogue Page | Full Range of Precision Parallel Helical Gears | Technical Pages

Sign in, or register: Why register? | Forgot password?