• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

PHG : 1.5 Module Precision Parallel Helical Gears

Precision Gears » Precision Parallel Helical Gears »
1.5 Module 15 deg. Parallel Helical Gear 20 deg. PA - Quality Grade 7e25 DIN 3961/3967 (AGMA Q10)

1.5 Module 15° Precision Parallel Helical Gear 20° PA Quality Grade 7e25 DIN 3961 (AGMA Q10)

Discounts 1+ 0% 6+ 5% 19+ 10%

Part
Number		 No. of
Teeth
Z		 Ref.
Dia.
d		 Tip
Dia.
da		 Bore
H7
di		 Max
Bore
di		 Hub
Dia.
BD		 Backlash
(mm)
jt.e (max)		 Backlash
(mm)
jt.i (min)		 I
Inertia
kgm2		 Mass
kg		 T2 Nm
n2100min-1		 Right Hand Helix Left Hand Helix
PHG-R Quantity Add to
Basket		 PHG-L Quantity Add to
Basket
PHG1.5-15 15 23.29 26.29 6 10 19 0.132 0.054 5.08 x 10-6 0.076 4.35 £14.69
£14.69
PHG1.5-16 16 24.85 27.85 6 10 19 0.132 0.054 6.10 x 10-6 0.083 4.63 £15.04
£15.04
PHG1.5-17 17 26.40 29.40 6 10 19 0.132 0.054 7.32 x 10-6 0.090 4.92 £15.49
£15.49
PHG1.5-18 18 27.95 30.95 6 10 19 0.132 0.054 8.77 x 10-6 0.098 5.21 £15.96
£15.96
PHG1.5-19 19 29.51 32.51 6 10 19 0.132 0.054 1.05 x 10-5 0.106 5.50 £16.57
£16.57
PHG1.5-20 20 31.06 34.06 6 10 19 0.134 0.053 1.25 x 10-5 0.115 7.37 £17.37
£17.37
PHG1.5-21 21 32.61 35.61 6 10 19 0.134 0.053 1.48 x 10-5 0.124 7.74 £17.61
£17.61
PHG1.5-22 22 34.16 37.16 8 16 28 0.134 0.053 2.30 x 10-5 0.167 8.11 £17.76
£17.76
PHG1.5-23 23 35.72 38.72 8 16 28 0.134 0.053 2.60 x 10-5 0.177 8.48 £18.04
£18.04
PHG1.5-24 24 37.27 40.27 8 16 28 0.134 0.053 2.95 x 10-5 0.188 8.85 £18.27
£18.27
PHG1.5-25 25 38.82 41.82 8 16 28 0.134 0.053 3.34 x 10-5 0.198 9.22 £19.18
£19.18
PHG1.5-26 26 40.38 43.38 8 16 28 0.134 0.053 3.79 x 10-5 0.210 12.06 £20.10
£20.10
PHG1.5-27 27 41.93 44.93 8 16 28 0.134 0.053 4.28 x 10-5 0.221 12.53 £20.81
£20.81
PHG1.5-28 28 43.48 46.48 8 16 28 0.134 0.053 4.84 x 10-5 0.234 12.99 £21.39
£21.39
PHG1.5-29 29 45.03 48.03 10 22 40 0.134 0.053 7.69 x 10-5 0.315 13.45 £21.67
£21.67
PHG1.5-30 30 46.59 49.59 10 22 40 0.134 0.053 8.38 x 10-5 0.328 15.86 £22.32
£22.32
PHG1.5-32 32 49.69 52.69 10 22 40 0.134 0.053 9.97 x 10-5 0.355 16.92 £23.11
£23.11
PHG1.5-35 35 54.35 57.35 10 22 40 0.177 0.072 1.30 x 10-4 0.400 18.51 £23.80
£23.80
PHG1.5-38 38 59.01 62.01 12 30 50 0.177 0.072 2.11 x 10-4 0.524 20.09 £26.08
£26.08
PHG1.5-40 40 62.12 65.12 12 30 50 0.177 0.072 2.43 x 10-4 0.558 27.06 £27.24
£27.24
PHG1.5-42 42 65.22 68.22 12 30 50 0.177 0.072 2.80 x 10-4 0.595 28.42 £27.27
£27.27
PHG1.5-45 45 69.88 72.88 12 30 50 0.177 0.072 3.45 x 10-4 0.652 30.45 £27.86
£27.86
PHG1.5-48 48 74.54 77.54 12 30 50 0.177 0.072 4.26 x 10-4 0.714 32.48 £29.74
£29.74
PHG1.5-50 50 77.65 80.65 14 35 65 0.177 0.072 6.22 x 10-4 0.908 42.34 £33.34
£33.34
PHG1.5-52 52 80.75 83.75 14 35 65 0.179 0.070 6.93 x 10-4 0.953 44.03 £34.90
£34.90
PHG1.5-55 55 85.41 88.41 14 35 65 0.179 0.070 8.16 x 10-4 1.024 46.57 £35.86
£35.86
PHG1.5-58 58 90.07 93.07 14 35 65 0.179 0.070 9.60 x 10-4 1.100 49.11 £36.59
£36.59
PHG1.5-60 60 93.17 96.17 14 35 65 0.179 0.070 1.07 x 10-3 1.152 57.86 £36.97
£36.97
PHG1.5-62 62 96.28 99.28 14 35 65 0.179 0.070 1.19 x 10-3 1.206 59.78 £37.67
£37.67
PHG1.5-65 65 100.94 103.94 16 40 85 0.179 0.070 1.79 x 10-3 1.557 62.68 £39.08
£39.08
PHG1.5-68 68 105.60 108.60 16 40 85 0.179 0.070 2.03 x 10-3 1.646 65.57 £41.49
£41.49
PHG1.5-70 70 108.70 111.70 16 40 85 0.179 0.070 2.20 x 10-3 1.707 67.50 £42.94
£42.94
PHG1.5-72 72 111.81 114.81 16 40 85 0.179 0.070 2.39 x 10-3 1.770 69.43 £45.39
£45.39
PHG1.5-75 75 116.47 119.47 16 40 85 0.179 0.070 2.71 x 10-3 1.868 72.32 £48.36
£48.36
PHG1.5-78 78 121.13 124.13 16 40 85 0.186 0.070 3.07 x 10-3 1.970 75.21 £50.98
£50.98

DIN 3967 Tooth Thickness tol.
n Efficiency approx. 98%



Standard Part PHG 1.5 - 50 R
· · · · · ·
Modified Part PHG 1.5 - 50 L H 25 K T
PHG - Precision Helical Gear
Quality Grade 7e25 DIN 3961/3967
Other Quality Grades available.
See Technical Pages		 T = 1 x Tapped hole 2T = 2 x Tapped holes.
P = 1 x Pin Hole PT = 1 x Pin Hole thru.
All threads metric as standard.
For sizes and prices see Technical Pages
mn Module - Cut with DIN 867 1.25/0.20/1.0
Ref. Tooth Profile Topping WD = 2.25 x mn		 K- Keyway supplied to
DIN 6885 - Js9 tolerance.
For prices see Technical Pages
Number of Teeth z To specify different bore enter size required
Example: 25 = 25mm H7 etc
For prices see Technical Pages
Righ Hand Helix (R) runs with
Left Hand Helix (L)		 Standard Material = 817M40T (28HRC)
H = 805M20 Case Hardened (58HRC)

Options
 - Different number of teeth
- Modifications available on request: Other material, boring out, keyways, tapped holes, pin holes.

Accessories
- Clamping sets, screws, keys, dowel pins...

Downloads
PDF Icon PDF Documents : Catalogue Page | Full Range of Precision Parallel Helical Gears | Technical Pages

Sign in, or register: Why register? | Forgot password?