• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

PHG : 1.5 Module Case Hard Precision Parallel Helical Gears

Precision Gears » Precision Parallel Helical Gears »
1.5 Module 15 deg. Case Hard Parallel Helical Gear 20 deg. PA - Quality Grade 7e25 DIN 3961 (AGMA Q10)

1.5 Module 15° Case Hard Precision Parallel Helical Gear 20° PA Quality Grade 7e25 DIN 3961 (AGMA Q10)
Discounts 1+ 0% 6+ 5% 19+ 10%

Part
Number		 No. of
Teeth
Z		 Ref.
Dia.
d		 Tip
Dia.
da		 Bore
H7
di		 Max
Bore
di		 Hub
Dia.
BD		 Backlash
(mm)
jt.e (max)		 Backlash
(mm)
jt.i (min)		 I
Inertia
kgm2

Mass
kg

 T2 Nm#
n2100min-1		 Right Hand Helix Left Hand Helix
PHG-RH Quantity Add to
Basket		 PHG-LH Quantity Add to
Basket
PHG1.5-15H 15 23.29 26.29 6 10 19 0.132 0.054 5.08 x 10-6 0.076 15.93 £24.23
£24.23
PHG1.5-16H 16 24.85 27.85 6 10 19 0.132 0.054 6.10 x 10-6 0.083 16.99 £24.80
£24.80
PHG1.5-17H 17 26.40 29.40 6 10 19 0.132 0.054 7.32 x 10-6 0.090 18.06 £25.56
£25.56
PHG1.5-18H 18 27.95 30.95 6 10 19 0.132 0.054 8.77 x 10-6 0.098 19.12 £26.32
£26.32
PHG1.5-19H 19 29.51 32.51 6 10 19 0.132 0.054 1.05 x 10-5 0.106 20.18 £27.34
£27.34
PHG1.5-20H 20 31.06 34.06 6 10 19 0.134 0.053 1.25 x 10-5 0.115 27.04 £28.65
£28.65
PHG1.5-21H 21 32.61 35.61 6 10 19 0.134 0.053 1.48 x 10-5 0.124 28.39 £29.07
£29.07
PHG1.5-22H 22 34.16 37.16 8 16 28 0.134 0.053 2.30 x 10-5 0.167 29.74 £29.29
£29.29
PHG1.5-23H 23 35.72 38.72 8 16 28 0.134 0.053 2.60 x 10-5 0.177 31.09 £29.77
£29.77
PHG1.5-24H 24 37.27 40.27 8 16 28 0.134 0.053 2.95 x 10-5 0.188 32.44 £30.15
£30.15
PHG1.5-25H 25 38.82 41.82 8 16 28 0.134 0.053 3.34 x 10-5 0.198 33.80 £31.65
£31.65
PHG1.5-26H 26 40.38 43.38 8 16 28 0.134 0.053 3.79 x 10-5 0.210 44.23 £33.16
£33.16
PHG1.5-27H 27 41.93 44.93 8 16 28 0.134 0.053 4.28 x 10-5 0.221 45.93 £34.34
£34.34
PHG1.5-28H 28 43.48 46.48 8 16 28 0.134 0.053 4.84 x 10-5 0.234 47.63 £35.29
£35.29
PHG1.5-29H 29 45.03 48.03 10 22 40 0.134 0.053 7.69 x 10-5 0.315 49.33 £35.77
£35.77
PHG1.5-30H 30 46.59 49.59 10 22 40 0.134 0.053 8.38 x 10-5 0.328 55.32 £36.84
£36.84
PHG1.5-32H 32 49.69 52.69 10 22 40 0.134 0.053 9.97 x 10-5 0.355 59.01 £38.14
£38.14
PHG1.5-35H 35 54.35 57.35 10 22 40 0.177 0.072 1.30 x 10-4 0.400 64.54 £39.27
£39.27
PHG1.5-38H 38 59.01 62.01 12 30 50 0.177 0.072 2.11 x 10-4 0.524 70.07 £43.04
£43.04
PHG1.5-40H 40 62.12 65.12 12 30 50 0.177 0.072 2.43 x 10-4 0.558 82.04 £44.95
£44.95
PHG1.5-42H 42 65.22 68.22 12 30 50 0.177 0.072 2.80 x 10-4 0.595 86.15 £44.98
£44.98
PHG1.5-45H 45 69.88 72.88 12 30 50 0.177 0.072 3.45 x 10-4 0.652 92.30 £45.97
£45.97
PHG1.5-48H 48 74.54 77.54 12 30 50 0.177 0.072 4.26 x 10-4 0.714 98.45 £49.07
£49.07
PHG1.5-50H 50 77.65 80.65 14 35 65 0.177 0.072 6.22 x 10-4 0.908 111.29 £55.01
£55.01
PHG1.5-52H 52 80.75 83.75 14 35 65 0.179 0.070 6.93 x 10-4 0.953 115.74 £57.59
£57.59
PHG1.5-55H 55 85.41 88.41 14 35 65 0.179 0.070 8.16 x 10-4 1.024 122.42 £59.16
£59.16
PHG1.5-58H 58 90.07 93.07 14 35 65 0.179 0.070 9.60 x 10-4 1.100 129.09 £60.38
£60.38
PHG1.5-60H 60 93.17 96.17 14 35 65 0.179 0.070 1.07 x 10-3 1.152 139.05 £60.99
£60.99
PHG1.5-62H 62 96.28 99.28 14 35 65 0.179 0.070 1.19 x 10-3 1.206 143.68 £62.16
£62.16
PHG1.5-65H 65 100.94 103.94 16 40 85 0.179 0.070 1.79 x 10-3 1.557 150.64 £64.49
£64.49
PHG1.5-68H 68 105.60 108.60 16 40 85 0.179 0.070 2.03 x 10-3 1.646 157.59 £68.46
£68.46
PHG1.5-70H 70 108.70 111.70 16 40 85 0.179 0.070 2.20 x 10-3 1.707 162.22 £70.86
£70.86
PHG1.5-72H 72 111.81 114.81 16 40 85 0.179 0.070 2.39 x 10-3 1.770 166.86 £74.90
£74.90
PHG1.5-75H 75 116.47 119.47 16 40 85 0.179 0.070 2.71 x 10-3 1.868 173.81 £79.80
£79.80
PHG1.5-78H 78 121.13 124.13 16 40 85 0.186 0.070 3.07 x 10-3 1.970 180.76 £84.12
£84.12

DIN 3967 Tooth Thickness tol.
# Quality Grades and Tolerances stated prior to heat treatment process
n Efficiency approx. 98%



Standard Part PHG 1.5 - 50 R

 

 

 

 
     

·

  

·

  

·

  

·

  

·

  

·

  
Modified Part PHG 1.5 - 50 L H 25 K T

PHG - Precision Helical Gear
Quality Grade 7e25 DIN 3961/3967
Other Quality Grades available.
See Technical Pages

T = 1 x Tapped hole 2T = 2 x Tapped holes.
P = 1 x Pin Hole PT = 1 x Pin Hole thru.
All threads metric as standard.
For sizes and prices see Technical Pages

mn Module - Cut with DIN 867 1.25/0.20/1.0
Ref. Tooth Profile Topping WD = 2.25 x mn

K- Keyway supplied to
DIN 6885 - Js9 tolerance.
For prices see Technical Pages

Number of Teeth z

To specify different bore enter size required
Example: 25 = 25mm H7 etc
For prices see Technical Pages

Right Hand Helix (R) runs with
Left Hand Helix (L)

Standard Material = 817M40T (28HRC)
H = 805M20 Case Hardened (58HRC)#

Options
 - Different number of teeth
- Modifications available on request: Other material, boring out, keyways, tapped holes, pin holes.

Accessories
- Clamping sets, screws, keys, dowel pins...

Downloads
PDF Icon PDF Documents : Catalogue Page | Full Range of Precision Parallel Helical Gears | Technical Pages

Sign in, or register: Why register? | Forgot password?