Ondrives: Mechanical - Spring Plungers - GN.33 - Threaded Ball Spring Plungers with Limit Switch

GN.33 : Threaded Ball Spring Plungers with Limit Switch

Mechanical » Spring Plungers »
GN.33 Type : M6 - M10 Threaded Ball Spring Plungers with Limit Switch

GN.33 threaded ball spring plungers with limit switch

Discounts

1+ 0%

6+ 12%

20+ 25%

60+ 37%

100+ 42%

200+ 48%

500+ 55%

1000+ 65%

2000+ 70%

Part Number	d	d1	d2	I	I1	I2 ±0.1	I3 ±0.1	s	Spring Pressure		Weight g	Cost	Quantity	Order
Part Number	d	d1	d2	I	I1	I2 ±0.1	I3 ±0.1	s	Preload N	Max Load N	Weight g	Cost	Quantity	Order
NORMAL END FORCE (BRIGHT ZINC PLATED)
GN.33801	M6	3	2.8	20	10	0.4	0.8	5.5	6	13	20	£88.84
GN.33802	M8	4	2.8	23	10	0.5	1.0	7.0	8	16	20	£88.91
GN.33803	M10	5	2.8	27	10	0.6	1.2	8.0	10	20	25	£94.01
HEAVY END FORCE (TROPICAL YELLOW ZINC PLATED)
GN.33811	M6	3	2.8	20	10	0.4	0.8	5.5	6	13	20	£88.84
GN.33812	M8	4	2.8	23	10	0.5	1.0	7.0	8	16	20	£88.91
GN.33813	M10	5	2.8	27	10	0.6	1.2	8.0	10	20	25	£94.01

Material
Body: Hardened nickel-plated steel partially coated with MVK and locking patch for threads.
Ball: Hardened steel
Spring: Stainless steel
Supply Cable: Grey two-phase for normally open contacts (type S) or black cable for normally closed contacts (type O). maximum tensile load 20N.

Other Info.
Working Temperature: -40°C to +170°C.
Electrical characteristic of the switch:
Electrical Supply: 20 mA DC / 50 mA DC
Voltage: 24V
Safety Standard: IP40
Supply Cable: diameter 2.8mm, 2 phases
Working Temperature: -10°C to +50°C
Average Switch Life-span: 5,000,000 switching.

On request and for sufficient quantities PFB blue instant locking patch for threads are available (type S-PFB, type O-PFB);
working temperature from -50°C to +90°C.

Warning: if the screw-in thread is earthed the blue cable has to be connected to the mass.

These threaded bolt spring plungers are used for locking or releasing piece by using a built-in electrical switch.

Downloads
PDF Documents : Catalogue Page | Full Range of Spring Plungers