Ondrives: Mechanical - Numerical Position Indicators - DA09s

DA09s Digital Position Indicator

Mechanical » Numerical Position Indicators »
DA09s Type : Digital Position Indicator

* Drill hole to match to allow counting - slide counter along shaft to fit pin into hole and lock in with M4 grubscrew. Counting can then begin.

Using traditional handwheels, the measured value is shown on an analogue scale. The vernier scale, however, shows the values of a single revolution only.
Digital position indicators allow the set position to be read at a glance.
The display value per spindle revolution can be determined in accordance with the spindle pitch and is achieved via gears.
Installation is simple; therefore, digital position indicators can be easily retrofitted.

Discounts

1+ 0%

20+ 15%

40+ 20%

60+ 25%

100+ 30%

Part Number	Direction of Rotation	Pitch	Display after 1 Revolution	Max. Speed (rpm)	Cost	Quantity	Add to Basket
DA09s-2101I	Clockwise	1	001.0	1500	£77.28
DA09s-2201I	Clockwise	2	002.0	750	£77.28
DA09s-2401I	Clockwise	4	004.0	450	£77.28
DA09s-2501I	Clockwise	5	005.0	300	£77.28
DA09s-21002I	Clockwise	10	010.0	150	£77.28
DA09s-2101E	Anti-Clockwise	1	001.0	1500	£77.28
DA09s-2201E	Anti-Clockwise	2	002.0	750	£77.28
DA09s-2401E	Anti-Clockwise	4	004.0	450	£77.28
DA09s-2501E	Anti-Clockwise	5	005.0	300	£77.28
DA09s-21002E	Anti-Clockwise	10	010.0	150	£77.28

Ordering
Mounting position 02 is supplied as standard. To order different mounting positions, contact Sales.
The part number should be changed as shown.
eg: Mounting position 04 = DA09s-4101I (list price), 06 = DA09s-6101I (P.O.A.), 07 = DA09s-7101I (P.O.A.)

Other Info.
Small Digital Indicator with easily-read display and vernier scale. Designed for tightly spaced axes and small spindle diameters.
Speeds above >500 r/min for short periods only. Other spindle pitches on request. Please contact our technical department for more details.

Counter: 5 decades, vernier scale Weight: 0.1 kg Digit size: 7 mm approx.
Housing Colour: Orange RAL 2004, black RAL 9005, grey RAL 7035
Hollow shaft [Ø mm]: 20H7mm Housing: High Impact plastic, dust tight..
Maximum Ambient Temperature: +80°C.
• Cushioned figured roller system giving increased .service life
• Considerably better readability due to magnifying glass in the window
• Universally applicable
• Mechanism protected by labyrinth box
• Special pitches
• mm/inch:display of metrical pitches in inches. The entire value is used for internal calculation, but is not displayed.
The display value and calculated numerical value are separated by "/".
Example:4 mm =0.15748 inch: Display value 000.15;calc.numerical value .../748
• Reducing sleeves for various diameters
• Counting mechanism cover made of mineral glass, solvent-resistant
• Stainless steel driving shaft
• Axial seal (dust-tight)
• Waterproof
Other pitches available - please contact Sales for details.

Downloads
DXF Drawings (Zip archived) : Numerical Indicators
PDF Documents : Catalogue Pages | Full Range of Indicators