Ondrives: Accessories - Lock Pins - GN.175 - Stainless Balls with Limited Tensile Strength

GN.175 : Stainless Balls with Limited Tensile Strength

Mechanical » Lock Pins »
GN.175 : Stainless Steel Balls Lock Pins with Limited Tensile Strength

Discounts

1+ 0%

6+ 12%

20+ 25%

60+ 37%

100+ 42%

200+ 48%

500+ 55%

1000+ 65%

2000+ 70%

Part Number	dH9	d2	D	d1	l	l1	L	Mounting Hole D12	Axial Holding Force* N	Double Sided Shearing Force# KN	Weight g	Cost	Quantity	Add to Basket
GN.17503	6	6.5	25	14.5	10	5.0	22.5	6	8	22	15	£17.26
GN.17505	6	6.5	25	14.5	15	5.0	22.5	6	8	22	18	£17.26
GN.17507	6	6.5	25	14.5	20	5.0	22.5	6	8	22	21	£17.26
GN.17509	6	6.5	25	14.5	25	5.0	22.5	6	8	22	24	£17.26
GN.17511	6	6.5	25	14.5	30	5.0	22.5	6	8	22	27	£17.59
GN.17513	6	6.5	25	14.5	50	5.0	22.5	6	8	22	33	£17.93
GN.17525	8	8.7	25	14.5	15	6.3	22.5	8	15	40	20	£19.41
GN.17527	8	8.7	25	14.5	20	6.3	22.5	8	15	40	25	£19.41
GN.17529	8	8.7	25	14.5	25	6.3	22.5	8	15	40	30	£19.41
GN.17531	8	8.7	25	14.5	30	6.3	22.5	8	15	40	35	£20.04
GN.17533	8	8.7	25	14.5	50	6.3	22.5	8	15	40	40	£20.74
GN.17545	10	12.0	31	18.5	15	8.7	27.0	10	30	62	35	£22.43
GN.17547	10	12.0	31	18.5	20	8.7	27.0	10	30	62	40	£22.43
GN.17549	10	12.0	31	18.5	25	8.7	27.0	10	30	62	45	£22.43
GN.17551	10	12.0	31	18.5	30	8.7	27.0	10	30	62	50	£23.08
GN.17553	10	12.0	31	18.5	50	8.7	27.0	10	30	62	55	£23.79
GN.17567	12	14.5	31	18.5	20	9.5	27.0	12	32	90	45	£25.30
GN.17569	12	14.5	31	18.5	30	9.5	27.0	12	32	90	50	£25.82
GN.17571	12	14.5	31	18.5	40	9.5	27.0	12	32	90	55	£26.37
GN.17573	12	14.5	31	18.5	50	9.5	27.0	12	32	90	60	£27.37

* The axial holding force values reported in the table are the results of laboratory tests at ambient temperature. They represent 50% of the average of the actual values.
# The double sided shearing force values reported in the table should be treated as guidelines only since no safety factor is considered.

Material
Pin/Push Button: AISI 303 stainless steel, thanks to its high resistance to corrosion, allows the application of these lock pins on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to corrosion resistant materials..
Balls & Spring: Stainless Steel.
Knurled Knob: Polyamide based (PA) technopolymer, black matte finish. Resistant to solvents, oils, greases and other chemical agents.
Maximum Working Temperature: -30°C to +80°C.

Other Info.
Ball lock pins with an Ød from 6 to 8 contain 1 ball whereas those with an Ød of 10 to 12 contain 2 balls.
The two balls are not provided with a locking mechanism but they are kept in position by a spring.
This is the reason why their tensile strength is limited compared to GN.381 and GN.380.
Suitable for quick fixation or connection of parts to be machined, in particular for elements which need to be removed and inserted continuously.

Downloads
PDF Documents : Catalogue Page | Full Range of Lock Pins