Ondrives: Mechanical - Levers & Handles - FMH & FAH - Button Thread® Clamping Levers

FMH FAH Button Thread® Clamping Levers

Mechanical » Levers & Handles »
FMH & FAH Type : Button Thread® Clamping Levers

Discounts

1+ 0%

21+ 10%

51+ 20%

Part Number	Part Number Plastic	Thread	A	B	C	D	Load Rating Kg*	Torque Nm¶	Cost Die- Cast Zinc	Quantity	Add to Basket	Cost Plastic	Quantity	Add to Basket
FMH-706	FAH-706	M6	21.0	26	65	45	940	10.78	£11.05			£8.23
FMH-708	FAH-708	M8	23.5	29	78	55	2925	16.92	£17.60			£13.13
FMH-710	FAH-710	M10	23.5	29	78	55	3915	26.57	£17.60			£13.13
FMH-712	FAH-712	M12	32.0	38	108	75	4005	51.78	£26.42			£19.69
FMH-716	FAH-716	M16	32.0	38	108	75	4095	74.96	£26.42			£19.69

Minimum order quantities / charges may apply for non-stock items. Please contact Sales for price and delivery.

Material
Handles: Die-cast zinc or plastic
Internal thread: mechanism made from carbon steel.

Other Info.
The thru-hole clamping lever allows for quick clamping on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage to allow for normal clamping. Great for repetitive tightening operations.
The analysis reported was performed in accordance with MMA Laboratories QC/QA Manual and related procedures.
* Threaded mandrels were installed into the button thread nuts and the force required to pull the mandrel through the nut is shown above.
¶ The samples were torque tested to failure on a case hardened threaded mandrel.
Ondrives recommends the use of Button Thread fasteners on low to medium load applications.
Repeated use on heavy loads may cause thread failure to occur.

Downloads
PDF Documents : Catalogue Page | Full Range of Levers & Handles