EBP Bridge Handles Front Mounting
Mechanical » Levers & Handles »
EBP : Bridge Handles Front Mounting
| Discounts | 1+ 0% | 20+ 15% | 40+ 20% | 60+ 25% | 100+ 30% |
| Part Number |
Dimensions | Mounting Holes | F1 N |
F2 N |
L1 J |
L2 J |
Weight g |
Cost | Quantity | Add to Basket |
||||||||
| L | f | D | h | B | l1 | d | d1 | h1 | h2 | |||||||||
| EBP-260111/C1 | 116.0 | 93.5±0.5 | 22.0 | 35 | 7.5 | 72.0 | 6.5 | 10.5 | 6.5 | 23.5 | 2000 | 1500 | 8 | 3 | 35 | £4.23 |
|
|
| EBP-260211/C1 | 144.0 | 117.0±0.5 | 26.0 | 39 | 8.5 | 92.0 | 8.5 | 13.5 | 8.5 | 26.5 | 2700 | 1800 | 10 | 4 | 55 | £4.36 |
|
|
| EBP-260311/C1 | 178.0 | 150.0±1 | 28.0 | 45 | 9.5 | 122.0 | 8.5 | 13.5 | 14.0 | 32.0 | 2700 | 1500 | 12 | 5 | 78 | £8.91 |
|
|
| EBP-260411/C1 | 208.5 | 179.0±1 | 28.5 | 51 | 9.5 | 150.5 | 8.5 | 13.5 | 16.0 | 35.0 | 2200 | 1500 | 16 | 9 | 95 | £10.08 |
|
|
Material
Handle: Glass-fibre reinforced polyamide based (PA) technopolymer.
Resistant to solvents, oils, greases and other chemical agents, grey-black, matte finish.
Caps: Technopolymer in Ergostyle colours, matte finish; supplied not assembled, press-fit assembly, removable by a screwdriver.
Available also as accessories sold separately (see table below).
| Discounts | 1+ 0% | 20+ 15% | 40+ 20% | 60+ 25% | 100+ 30% |
| Part Number |
Caps for | Cost | Quantity | Add to Basket |
| EBP-29830 | EBP-260111 | £0.00 |
|
|
| EBP-29831 | EBP-260211, EBP-260311, EBP-260411 | £0.00 |
|
Features
• Through holes for cylindrical-head screws with hexagon socket.
• EBP front mounting handles can be assembled in pairs opposed to EBPB back mounting handles (Fig.1)
• Tensile stress and impact strength: F1, F2, L1 and L2 values reported in the table are the result of breaking tests
carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature.
Downloads
PDF Documents : Catalogue Page | Full Range of Levers & Handles
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login