EBPB : Bridge Handles Back Mounting
Mechanical » Levers & Handles »
EBPB : Bridge Handles Back Mounting
| Discounts | 1+ 0% | 20+ 15% | 40+ 20% | 60+ 25% | 100+ 30% |
| Part Number |
Dimensions | Threaded Bosses | F1 N |
F2 N |
L1 J |
L2 J |
Weight g |
Cost | Quantity | Add to Basket |
|||||||
| L | f | D | h | B | l1 | d1 | d6H | p | |||||||||
| EBPB-260121/C1 | 116.0 | 93.5±0.5 | 22.0 | 35 | 7.5 | 72.0 | 10.5 | M6 | 12 | 2000 | 1500 | 8 | 3 | 45 | £6.41 |
|
|
| EBPB-260221/C1 | 144.0 | 117.0±0.5 | 26.0 | 39 | 8.5 | 92.0 | 13.5 | M8 | 13 | 2700 | 1800 | 10 | 4 | 65 | £6.54 |
|
|
| EBPB-260321/C1 | 178.0 | 150.0±1 | 28.0 | 45 | 9.5 | 122.0 | 13.5 | M8 | 13 | 2700 | 1500 | 12 | 5 | 98 | £10.63 |
|
|
| EBPB-260421/C1 | 208.5 | 179.0±1 | 28.5 | 51 | 9.5 | 150.5 | 13.5 | M8 | 13 | 2200 | 1500 | 16 | 9 | 108 | £12.43 |
|
|
Material
Handle: Glass-fibre reinforced polyamide based (PA) technopolymer.
Resistant to solvents, oils, greases and other chemical agents, grey-black, matte finish.
Caps: Technopolymer in Ergostyle colours, matte finish; supplied not assembled, press-fit assembly, removable by a screwdriver.
Available also as accessories sold separately (see table below).
Threads: Brass bosses, tapped blind holes.
| Discounts | 1+ 0% | 20+ 15% | 40+ 20% | 60+ 25% | 100+ 30% |
| Part Number |
Caps for | Cost | Quantity | Add to Basket |
| EBP-29830 | EBPB-260121 | £POA |
|
|
| EBP-29831 | EBPB-260221, EBPB-260321, EBPB-260421 | £POA |
|
Features
• EBPB back mounting handles can be assembled in pairs opposed to EBP front mounting handles (Fig.1).
• Tensile stress and impact strength: F1, F2, L1 and L2 values reported in the table are the result of breaking tests
carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature.
Downloads
PDF Documents : Catalogue Page | Full Range of Levers & Handles
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login