Ondrives: Mechanical - Indexing Plungers - GN.342 & GN.343 - Stainless Indexing Plungers with Lever

GN.342 GN.343 : Stainless Indexing Plungers with Lever

Mechanical » Indexing Plungers »
GN.342 & GN.343 : Stainless Indexing Plungers with Lever

Discounts

1+ 0%

6+ 12%

20+ 25%

60+ 37%

100+ 42%

200+ 48%

500+ 55%

1000+ 65%

2000+ 70%

Part Number	Execution	Dimensions								Spring Pressure		Weight g	Cost	Quantity	Add to Basket
Part Number	Execution	d -0.02 -0.04	d1	D	l	l1	R	R1	L	Pre- Load [N~]	Max Load [N~]	Weight g	Cost	Quantity	Add to Basket
GN.34295	A	5	M12x1.5	12	26	8	26	-	13	8	18	91	£20.58
GN.34296	A	6	M16x1.5	16	30	10	32	-	16	11	29	100	£30.39
GN.34297	A	8	M16x1.5	16	30	10	32	-	16	11	29	103	£30.39
GN.34298	A	10	M16x1.5	16	30	10	32	-	16	11	29	104	£30.39
GN.34306	A	8	M20x1.5	20	36	12	37	-	21	21	57	112	£35.66
GN.34307	A	10	M20x1.5	20	36	12	37	-	21	21	57	115	£35.69
GN.34308	A	12	M20x1.5	20	36	12	37	-	21	21	57	120	£33.90
GN.34315	AK	5	M12x1.5	12	26	8	26	-	13	8	18	116	£22.46
GN.34316	AK	6	M16x1.5	16	30	10	32	-	16	11	29	135	£30.65
GN.34317	AK	8	M16x1.5	16	30	10	32	-	16	11	29	138	£30.65
GN.34318	AK	10	M16x1.5	16	30	10	32	-	16	11	29	140	£30.65
GN.34326	AK	8	M20x1.5	20	36	12	37	-	21	21	57	114	£38.27
GN.34327	AK	10	M20x1.5	20	36	12	37	-	21	21	57	117	£41.31
GN.34328	AK	12	M20x1.5	20	36	12	37	-	21	21	57	156	£41.90
GN.34335	B	5	M12x1.5	12	26	8	-	32	13	8	18	93	£22.76
GN.34336	B	6	M16x1.5	16	30	10	-	42	16	11	29	102	£32.14
GN.34337	B	8	M16x1.5	16	30	10	-	42	16	11	29	105	£32.14
GN.34338	B	10	M16x1.5	16	30	10	-	42	16	11	29	111	£32.14
GN.34346	B	8	M20x1.5	20	36	12	-	52	21	21	57	114	£37.45
GN.34347	B	10	M20x1.5	20	36	12	-	52	21	21	57	117	£37.55
GN.34348	B	12	M20x1.5	20	36	12	-	52	21	21	57	123	£37.55
GN.34355	BK	5	M12x1.5	12	26	8	-	32	13	8	18	118	£24.64
GN.34356	BK	6	M16x1.5	16	30	10	-	42	16	11	29	137	£32.26
GN.34357	BK	8	M16x1.5	16	30	10	-	42	16	11	29	140	£32.26
GN.34358	BK	10	M16x1.5	16	30	10	-	42	16	11	29	147	£32.26
GN.34366	BK	8	M20x1.5	20	36	12	-	52	21	21	57	150	£40.01
GN.34367	BK	10	M20x1.5	20	36	12	-	52	21	21	57	153	£40.01
GN.34368	BK	12	M20x1.5	20	36	12	-	52	21	21	57	159	£42.76

Material
Threaded Body:AISI 303 stainless steel, thanks to its high resistance to corrosion, allows the application of these lever indexing plungers on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.
Plunger:Fine turned and nickel-plated AISI stainless steel. Suggested matching hole in H7 tolerance
Locking Nut:Stainless steel.
Lever:Stainless steel.
Lever Cover: High resilience polyamide based (PA) technopolymer, black matte finish.

By rotating the lifting lever by 180°, the plunger stops in the retracted position. The lever is kept in this position by a notch.

Features
Resistant to solvents, oils, greases and other chemical agents.
Standard executions available:
  Execution A: without lever cover, without locking nut.
  Execution AK: without lever cover, with locking nut.
  Execution B: with lever cover, without locking nut.
  Execution BK: with lever cover, with locking nut.
Used when the plunger must be retracted quickly.

Downloads
PDF Documents : Catalogue Page | Full Range of Indexing Plungers