GN.351 : Stainless Indexing Plungers Standard Range
Mechanical » Indexing Plungers »
GN.351 : Stainless Steel Indexing Plungers Standard Range
| Discounts | 1+ 0% | 6+ 12% | 20+ 25% | 60+ 37% | 100+ 42% | 200+ 48% | 500+ 55% | 1000+ 65% | 2000+ 70% |
| Part Number |
Execution | Dimensions | Spring Pressure | Weight g |
Cost | Quantity | Add to Basket |
|||||||||||
| d -0.02 -0.04 |
L | d16g | d2 | D | l | l1 | l2 | l3 | l4 | s | Pre- Load [N~] |
Max Load [N~] |
||||||
| GN.35103 | A | 5 | 23.0 | M10x1 | - | 21 | 17 | 5 | 5 | 15 | - | 12 | 6 | 15 | 20 | £16.45 |
|
|
| GN.35113 | A | 6 | 28.5 | M12x1.5 | - | 25 | 20 | 6 | 6 | 17 | - | 14 | 8 | 21 | 32 | £19.14 |
|
|
| GN.35123 | A | 8 | 35.0 | M16x1.5 | - | 31 | 26 | 8 | 8 | 23 | - | 19 | 9 | 26 | 70 | £24.22 |
|
|
| GN.35133 | A | 10 | 37.0 | M20x1.5 | - | 31 | 33 | 10 | 10 | 30 | - | 22 | 17 | 40 | 115 | £37.91 |
|
|
| GN.35104 | AK | 5 | 23.0 | M10x1 | - | 21 | 17 | 5 | 5 | 15 | - | 12 | 6 | 15 | 24 | £18.08 |
|
|
| GN.35114 | AK | 6 | 28.5 | M12x1.5 | - | 25 | 20 | 6 | 6 | 17 | - | 14 | 8 | 21 | 42 | £21.00 |
|
|
| GN.35124 | AK | 8 | 35.0 | M16x1.5 | - | 31 | 26 | 8 | 8 | 23 | - | 19 | 9 | 26 | 90 | £26.88 |
|
|
| GN.35134 | AK | 10 | 37.0 | M20x1.5 | - | 31 | 33 | 10 | 10 | 30 | - | 22 | 17 | 40 | 143 | £43.52 |
|
|
| GN.35108 | G | 5 | 23.0 | M10x1 | M5 | 21 | 17 | 5 | 5 | 15 | 6 | 12 | 6 | 15 | 15 | £15.24 |
|
|
| GN.35118 | G | 6 | 28.5 | M12x1.5 | M6 | 25 | 20 | 6 | 6 | 17 | 10 | 14 | 8 | 21 | 25 | £18.44 |
|
|
| GN.35128 | G | 8 | 35.0 | M16x1.5 | M8 | 31 | 26 | 8 | 8 | 23 | 12 | 19 | 9 | 26 | 57 | £23.04 |
|
|
| GN.35138 | G | 10 | 37.0 | M20x1.5 | M8 | 31 | 33 | 10 | 10 | 30 | 12 | 22 | 17 | 40 | 100 | £36.70 |
|
|
| GN.35109 | GK | 5 | 23.0 | M10x1 | M5 | 21 | 17 | 5 | 5 | 15 | 6 | 12 | 6 | 15 | 22 | £16.87 |
|
|
| GN.35119 | GK | 6 | 28.5 | M12x1.5 | M6 | 25 | 20 | 6 | 6 | 17 | 10 | 14 | 8 | 21 | 35 | £19.61 |
|
|
| GN.35129 | GK | 8 | 35.0 | M16x1.5 | M8 | 31 | 26 | 8 | 8 | 23 | 12 | 19 | 9 | 26 | 77 | £24.84 |
|
|
| GN.35139 | GK | 10 | 37.0 | M20x1.5 | M8 | 31 | 33 | 10 | 10 | 30 | 12 | 22 | 17 | 40 | 130 | £39.90 |
|
|
Material
Threaded Body:AISI 303 stainless steel, thanks to its high resistance to corrosion, allows the application of these indexing plungers on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.
Plunger:Nickel-plated AISI 303 stainless steel. Suggested matching hole in H7 tolerance.
Locking Nut: Stainless steel.
Knurled Knob ("Push/Pull"): High resilience polyamide based (PA) technopolymer, black matte finish.
Options (subject to minimum order quantities)
AISI 303 stainless steel distance bushings are available for making up for the length of the threading in case the plunger is assembled on thin sheets.
Features
Resistant to solvents, oils, greases and other chemical agents.
Used where positioning operations are required.
Standard executions available:
Execution A: with knob, without locking nut.
Execution AK: with knob and locking nut.
Execution G: without knob, without locking nut.
Execution GK: without knob, with locking nut.
Execution G and GK, without knob, are provided with threaded drive rod for combination with knobs on customer's request or to join the rod to an operating mechanism of the machine.
Downloads
PDF Documents : Catalogue Page | Full Range of Indexing Plungers
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login