Ondrives: Mechanical - Hinges - CFO - Plastic Offset Lift-Off

CFO : Plastic Offset Lift-Off

Mechanical » Hinges »
CFO : Plastic Hinges Offset Lift-Off

CFO : Plastic Hinges Offset Lift-Off

Discounts

1+ 0%

20+ 15%

40+ 20%

60+ 25%

100+ 30%

Part Number	L	B	H	f	f1	f2	l1	l2	l3	h1	h2	b1	b2	d	d3	d6	Weight g	Radial Strength Max. Working Load* Er N	Axial Strength Max. Working Load* Ea N	Max. Tightening Torque Nm	Cost	Quantity	Add to Basket
CFO-426211/C9	64	24.5	16	19	6	9.5	31	2	24	9	2.5	17.5	16	8	5.5	8.5	25	200	290	5	£4.79

* Parallel and Perpendicular Planes

Material
Hinge: Glass-fibre reinforced polyamide based (PA) technopolymer, black matte finish.
Resistant to solvents, oils, greases and other chemical agents.
Rotation Pin: Acetal resin based (POM) technopolymer, black finish.
Screw Covers: Polyester based (PBT) technopolymer, black glossy finish, snap-in assembly.
Covers for Rotation Pin Housing: Technopolymer, black matte finish; to be fitted after assembly.
Temperature: -20°C to +80°C

Options (subject to minimum order quantities)
Screw covers in other RAL colours.

Features
Through holes for hexagonal head screws, cylindrical head screws with hexagon socket or M5 normal nuts (UNI 5588).
Offset lift-off hinges have been designed with a particular system patented by ELESA which allows the adjustment of the inclination of the door on the frame.
The two bodies of the hinge have two rotation pin housings each: the one which remains on the outer edge of the hinge can be closed with the supplied covers.
They can be mounted on doors which open on the right or on the left side.

Downloads
PDF Documents : Catalogue Page | Full Range of Latches