Ondrives: Mechanical - Hinges - CFC - Plastic Thin

CFC : Plastic Thin, 335° Max. Rotational Angle

Mechanical » Hinges »
CFC : Plastic Hinges Thin

CFC : Plastic Hinges Thin

Discounts

1+ 0%

20+ 15%

40+ 20%

60+ 25%

100+ 30%

Part Number	B	L	f ±0.25	f1 ±0.25	f2	H	h1	h2	l1	b1	Through Holes	Weight g	Radial Strength		Axial Strength		90° Angled Strength		Max. Tightening Torque Nm	Cost	Quantity	Add to Basket
													Max. Working Load Er N	Load at Breakage Rr N	Max. Working Load Ea N	Load at Breakage Ra N	Max. Working Load E90 N	Load at Breakage R90 N
CFC-422611	59	55	26.1	43.7	8	14	8	6	62	20	4.8	20	890	1770	750	1500	180	270	5	£7.51

Material
Hinge: Glass-fibre reinforced polyamide based (PA) technopolymer, black matte finish.
Resistant to solvents, oils, greases and other chemical agents.
Rotation Pin: Acetal resin based (POM) technopolymer.
End Caps: Acetal resin based (POM) technopolymer.
Temperature: -20°C to +80°C

Rotation Angle
CFC hinges have a max rotation angle of 335°.
Depending on the type of assembly (see Fig. 1, Fig. 2 and Fig. 3) the rotation angle of the door can be lower.
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
For further info on the type and number of hinges required, please ask sales.

Options
By replacing the technopolymer rotation pin with a metal one with an appropriate form, the hinge is suitable to control a safety micro switch mounted on the structure where the hinge is situated.

Features
Through holes for self-tapping countersunk head screws, 4.8mm diameter.
Completely made of technopolymer, without using metal parts, the hinge is suitable for applications on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.

Downloads
PDF Documents : Catalogue Page | Full Range of Latches