CFA : Plastic, 220° Max. Rotational Angle
Mechanical » Hinges »
CFA : Plastic Hinges Standard Executions (4 Types)
| Discounts | 1+ 0% | 20+ 15% | 40+ 20% | 60+ 25% | 100+ 30% |
| Part Number |
Execution | B | L | f ±0.25 |
f1 ±0.25 |
H | h1 | h2 | b1 | d | Fitting | Weight g |
Cost | Quantity | Add to Basket |
|||||||
| Bushings | Studs | Through Holes | ||||||||||||||||||||
| d1 | h | d2 | l | d3 | d4 | d5 | h3 | |||||||||||||||
| CFA-422391 | B | 38.5 | 39.5 | 25.1 | 25.0 | 14 | 9.5 | 9.5 | 14 | 3 | M4 | 6.5 | - | - | - | - | - | - | 23 | £5.60 |
|
|
| CFA-422411 | SH | 38.5 | 39.5 | 25.1 | 25.0 | 14 | 9.5 | 9.5 | 14 | 3 | - | - | - | - | 4.5 | 8.5 | - | - | 14 | £3.22 |
|
|
| CFA-422412 | CH | 38.5 | 39.5 | 25.1 | 25.0 | 14 | 9.5 | 9.5 | 14 | 3 | - | - | - | - | 4.5 | - | 8.5 | 4.5 | 14 | £3.22 |
|
|
| CFA-422111 | B | 48.0 | 49.5 | 30.5 | 31.0 | 19 | 13.0 | 11.0 | 17 | 4 | M5 | 8.5 | - | - | - | - | - | - | 39 | £8.01 |
|
|
| CFA-422113 | B | 48.0 | 49.5 | 30.5 | 31.0 | 19 | 13.0 | 11.0 | 17 | 4 | M6 | 8.0 | - | - | - | - | - | - | 38 | £8.25 |
|
|
| CFA-422121 | p | 48.0 | 49.5 | 30.5 | 31.0 | 19 | 13.0 | 11.0 | 17 | 4 | - | - | M5 | 14 | - | - | - | - | 45 | £7.32 |
|
|
| CFA-422131 | SH | 48.0 | 49.5 | 30.5 | 31.0 | 19 | 13.0 | 11.0 | 17 | 4 | - | - | - | - | 5.5 | 10.0 | - | - | 29 | £5.05 |
|
|
| CFA-422132 | CH | 48.0 | 49.5 | 30.5 | 31.0 | 19 | 13.0 | 11.0 | 17 | 4 | - | - | - | - | 5.5 | - | 10.0 | 5.5 | 29 | £5.05 |
|
|
| CFA-422211 | B | 64.0 | 65.0 | 40.0 | 40.0 | 23 | 15.0 | 13.5 | 24 | 5 | M6 | 9.0 | - | - | - | - | - | - | 85 | £11.15 |
|
|
| CFA-422221 | p | 64.0 | 65.0 | 40.0 | 40.0 | 23 | 15.0 | 13.5 | 24 | 5 | - | - | M6 | 18 | - | - | - | - | 90 | £9.70 |
|
|
| CFA-422231 | SH | 64.0 | 65.0 | 40.0 | 40.0 | 23 | 15.0 | 13.5 | 24 | 5 | - | - | - | - | 6.5 | 12.5 | - | - | 62 | £7.55 |
|
|
| CFA-422232 | CH | 64.0 | 65.0 | 40.0 | 40.0 | 23 | 15.0 | 13.5 | 24 | 5 | - | - | - | - | 6.5 | - | 11.0 | 6.5 | 62 | £7.55 |
|
|
| CFA-422311 | B | 97.5 | 96.5 | 59.5 | 62.5 | 35 | 23.0 | 20.5 | 35 | 8 | M10 | 15.0 | - | - | - | - | - | - | 306 | £21.52 |
|
|
| CFA-422321 | p | 97.5 | 96.5 | 59.5 | 62.5 | 35 | 23.0 | 20.5 | 35 | 8 | - | - | M10 | 20 | - | - | - | - | 330 | £16.57 |
|
|
| CFA-422331 | SH | 97.5 | 96.5 | 59.5 | 62.5 | 35 | 23.0 | 20.5 | 35 | 8 | - | - | - | - | 10.5 | 20.0 | - | - | 221 | £13.48 |
|
|
| CFA-422332 | CH | 97.5 | 96.5 | 59.5 | 62.5 | 35 | 23.0 | 20.5 | 35 | 8 | - | - | - | - | 10.5 | - | 17.0 | 10.5 | 221 | £13.48 |
|
|
Material
Hinge: High resilience polyamide based (PA) technopolymer, black matte finish.
Resistant to solvents, oils, greases and other chemical agents.
Rotation Pin: AISI 303 stainless steel.
Temperature: -20°C to +80°C
Rotation Angle
Max 220°, between 0° and -40° and between 0° and 180° (0° = condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit (see drawing) so as not to prejudice the hinge mechanical performance.
For further info on the type and number of hinges required, please ask sales.
Features
Standard executions available:
Execution B: nickel-plated brass bushings, tapped hole.
Execution p: nickel-plated steel threaded studs.
Execution SH: through holes for countersunk head screws.
Execution CH: through holes for cylindrical head screws.
Combined executions: B/p - B/SH - B/CH - p/SH - p/CH.
Downloads
PDF Documents : Catalogue Page | Full Range of Latches
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login