• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

PP : Short Plain Jig Bushes

Mechanical » Dowel & Spring Pins »
PP Type : Plain Jig Bushes - Short Series

Headless Type Press Fit. ISO 4247 / BS 1098 Pt. 2 1977 / DIN 179A
PP Type : Plain Jig Bushes - Short Series
Short Series

Discounts 1+ 0% 10+ 5% 25+ 10% 50+ 15% 100+ 20% 200+ 25% 500+ 30% 1000+ 40% 2000+ 45%

Part 
Number		 C ØBh16 ØAF7 Cost Quantity Order
From Up to
PP3A 6 3 - 1.0 £18.14
PP4A 6 4 1.05 1.8 £16.83
PP5A 6 5 1.85 2.6 £11.29
PP6B 8 6 2.65 3.3 £8.03
PP7B 8 7 3.40 4.0 £7.80
PP8B 8 8 4.10 5.0 £8.36
PP10D 10 10 5.10 6.0 £8.49
PP12D 10 12 6.10 8.0 £8.49
PP15E 12 15 8.10 10.0 £8.93
PP18E 12 18 10.10 12.0 £9.20
PP22F 16 22 12.10 15.0 £12.00
PP26F 16 26 15.25 18.0 £13.55
PP30H 20 30 18.25 22.0 £13.97
Part 
Number		 C ØBh16 ØAF7 Cost Quantity Order
From Up to
PP35H 20 35 22.25 26.0 £16.19
PP42J 25 42 26.25 30.0 £17.36
PP48J 25 48 30.25 35.0 £20.38
PP55L 30 55 35.50 42.0 £28.78
PP62L 30 62 42.50 48.0 £29.44
PP70L 30 70 48.50 55.0 £POA
PP78M 35 78 56.00 63.0 £POA
PP85M 35 85 64.00 70.0 £POA
PP95P 40 95 71.00 78.0 £POA
PP105P 40 105 79.00 85.0 £POA
PP115R 45 115 86.00 95.0 £POA
PP125R 45 125 96.00 105.0 £POA
Minimum order value of £50 applies.

Material
535A99 (100Cr6) Through hardened Steel 62-64Rc.

Ordering Example = PP4A 1.05
Bore size required for order and delivery

Standard Increment Bore Sizes
From 1.0mm to 3mm in steps of 0.05mm.
From 3.0mm to 14mm in steps of 0.10mm.
From 14.0mm to 33mm in steps of 0.25mm (and including all 0.25mm and 0.75mm sizes).
From 33.0mm to 51mm in steps of 0.50mm.
From 51.0mm to 100mm in steps of 1.00mm.

Nitrided bushes for longer life giving a hardness of 67-69 Rockwell C are available at extra cost. 

Nominal Sizes F7 Hole n6 Shaft
Over Up to High+ Low+ High+ Low+
- 3 16 6 10 4
3 6 22 10 16 8
6 10 28 13 19 10
10 18 34 16 23 12
18 30 41 20 28 15
30 50 50 25 33 17
50 80 60 30 39 20
80 120 71 36 45 23

Also Available
(a) Fixed & Slip Renewable: These two features are incorporated on one bush, which is used in conjunction with liner bushes, and is held in place by a lock screw, tenon or stop pin. 
The bush is a slide fit in its corresponding liner. 
The removable fixed feature of the bush is normally used on high production work, when the bush can be easily and quickly replaced with a minimum loss of production. 
The removable slip feature of the bush is used when more than one operation is carried out, when the bush is instantly removable after each operation.
(b) Headless Liner Type: This range is for use in conjunction with Renewable Fixed and Slip type bushes.
(c) Headed Liner Type: As above but headed. The shallow head can be left standing proud or countersunk flush.

Imperial sizes for all types available.

Downloads
PDF Icon PDF Documents : Catalogue Pages

Sign in, or register: Why register? | Forgot password?