Ondrives: Mechanical - Dowel & Spring Pins - PP - Headed Jig Bushes - Long

PH : Long Headed Jig Bushes

Mechanical » Dowel & Spring Pins »
PH Type : Headed Jig Bushes - Long Series

Headless Type Press Fit. ISO 4247 / BS 1098 Pt. 2 1977 / DIN 172A

Long Series

Discounts

1+ 0%

10+ 5%

25+ 10%

50+ 15%

100+ 20%

200+ 25%

500+ 30%

1000+ 40%

2000+ 45%

Part Number	C	ØB^h16	ØD^h13	E	ØA^F7		Cost	Quantity	Order
Part Number	C	ØB^h16	ØD^h13	E	From	Up to	Cost	Quantity	Order
PH3C	9	3	6	2.0	-	1.0	£24.44
PH4C	9	4	7	2.0	1.05	1.8	£18.49
PH5C	9	5	8	2.0	1.85	2.6	£14.07
PH6E	12	6	9	2.5	2.65	3.3	£8.93
PH7E	12	7	10	2.5	3.40	4.0	£9.49
PH8E	12	8	11	2.5	4.10	5.0	£10.34
PH10F	16	10	13	3.0	5.10	6.0	£13.28
PH12F	16	12	15	3.0	6.10	8.0	£13.28
PH15H	20	15	18	3.0	8.10	10.0	£13.41
PH18H	20	18	22	4.0	10.10	12.0	£13.55
PH22K	28	22	26	4.0	12.10	15.0	£16.40
PH26K	28	26	30	4.0	15.25	18.0	£20.67
PH30N	36	30	34	5.0	18.25	22.0	£25.19

Part Number	C	ØB^h16	ØD^h13	E	ØA^F7		Cost	Quantity	Order
Part Number	C	ØB^h16	ØD^h13	E	From	Up to	Cost	Quantity	Order
PH35N	36	35	39	5.0	22.25	26.0	£25.86
PH42R	45	42	46	5.0	26.25	30.0	£33.03
PH48R	45	48	52	5.0	30.25	35.0	£35.18
PH55S	56	55	59	5.0	35.50	42.0	£42.60
PH62S	56	62	66	6.0	42.50	48.0	£44.34
PH70S	56	70	74	6.0	48.50	55.0	£POA
PH78T	67	78	82	6.0	56.00	63.0	£POA
PH85T	67	85	90	6.0	64.00	70.0	£POA
PH95W	78	95	100	6.0	71.00	78.0	£POA
PH105W	78	105	110	6.0	79.00	85.0	£POA
PH115X	89	115	120	6.0	86.00	95.0	£POA
PH125X	89	125	130	6.0	96.00	105.0	£POA

Minimum order value of £50 applies.

Material
535A99 (100Cr6) Through hardened Steel 62-64Rc.

Ordering Example =	PH18E	12.00
		Bore size required for order and delivery

Standard Increment Bore Sizes
From 1.0mm to 3mm in steps of 0.05mm.
From 3.0mm to 14mm in steps of 0.10mm.
From 14.0mm to 33mm in steps of 0.25mm (and including all 0.25mm and 0.75mm sizes).
From 33.0mm to 51mm in steps of 0.50mm.
From 51.0mm to 100mm in steps of 1.00mm.

Nitrided bushes for longer life giving a hardness of 67-69 Rockwell C are available at extra cost. .

Nominal Sizes		F7 Hole		n6 Shaft		h13 Shaft
Over	Up to	High+	Low+	High+	Low+	High	Low-
-	3	16	6	10	4	0	140
3	6	22	10	16	8	0	180
6	10	28	13	19	10	0	220
10	18	34	16	23	12	0	270
18	30	41	20	28	15	0	330
30	50	50	25	33	17	0	390
50	80	60	30	39	20	0	460
80	120	71	36	45	23	0	540

Also Available
(a) Fixed & Slip Renewable: These two features are incorporated on one bush, which is used in conjunction with liner bushes, and is held in place by a lock screw, tenon or stop pin.
The bush is a slide fit in its corresponding liner.
The removable fixed feature of the bush is normally used on high production work, when the bush can be easily and quickly replaced with a minimum loss of production.
The removable slip feature of the bush is used when more than one operation is carried out, when the bush is instantly removable after each operation.
(b) Headless Liner Type: This range is for use in conjunction with Renewable Fixed and Slip type bushes.
(c) Headed Liner Type: As above but headed. The shallow head can be left standing proud or countersunk flush.

Imperial sizes for all types available.

Downloads
PDF Documents : Catalogue Page