DSF1.4-6 : Hammer Drive Pins
Mechanical » Dowel & Spring Pins »DSF Type : 1.4 - 6.0 Dia. Hammer Drive Pins (Flat Head)
| Discounts | 1+ 0% | 6+ 12% | 20+ 25% | 60+ 37% | 100+ 42% | 200+ 48% | 500+ 55% | 1000+ 65% | 2000+ 70% |
| Part Number |
Nominal Dia. |
L±0.25 |
+0.00 |
+0.00 |
Ød3 Max. |
Head Thickness Max. |
Chamfer C |
Pilot Length P |
Rec.
Hole Dia. Min. |
Rec.
Hole Dia. Max. |
Cost | Quantity | Order |
| DSF1.4-5 | Ø1.4 | 5 | 1.40 | 1.63 | 2.60 | 0.55 | 0.15 | 1 | 1.4 | 1.46 | £0.17 |
|
|
| DSF1.4-6 | Ø1.4 | 6 | 1.40 | 1.63 | 2.60 | 0.55 | 0.15 | 1 | 1.4 | 1.46 | £0.17 |
|
|
| DSF1.4-8 | Ø1.4 | 8 | 1.40 | 1.63 | 2.60 | 0.55 | 0.15 | 1 | 1.4 | 1.46 | £0.17 |
|
|
| DSF1.6-5 | Ø1.6 | 5 | 1.60 | 1.83 | 3.00 | 0.65 | 0.15 | 1 | 1.6 | 1.66 | £0.17 |
|
|
| DSF1.6-6 | Ø1.6 | 6 | 1.60 | 1.83 | 3.00 | 0.65 | 0.15 | 1 | 1.6 | 1.66 | £0.17 |
|
|
| DSF1.6-8 | Ø1.6 | 8 | 1.60 | 1.83 | 3.00 | 0.65 | 0.15 | 1 | 1.6 | 1.66 | £0.17 |
|
|
| DSF2-6 | Ø2.0 | 6 | 2.00 | 2.30 | 3.70 | 0.75 | 0.15 | 1 | 2.0 | 2.06 | £0.21 |
|
|
| DSF2-8 | Ø2.0 | 8 | 2.00 | 2.30 | 3.70 | 0.75 | 0.15 | 1 | 2.0 | 2.06 | £0.21 |
|
|
| DSF2-10 | Ø2.0 | 10 | 2.00 | 2.30 | 3.70 | 0.75 | 0.15 | 1 | 2.0 | 2.06 | £0.24 |
|
|
| DSF2.5-6 | Ø2.5 | 6 | 2.50 | 2.80 | 4.60 | 0.90 | 0.15 | 1 | 2.5 | 2.56 | £0.26 |
|
|
| DSF2.5-8 | Ø2.5 | 8 | 2.50 | 2.80 | 4.60 | 0.90 | 0.15 | 1 | 2.5 | 2.56 | £0.26 |
|
|
| DSF2.5-10 | Ø2.5 | 10 | 2.50 | 2.80 | 4.60 | 0.90 | 0.15 | 1 | 2.5 | 2.56 | £0.26 |
|
|
| DSF3-8 | Ø3.0 | 8 | 2.95 | 3.35 | 5.45 | 1.20 | 0.15 | 1 | 3.0 | 3.06 | £POA |
|
|
| DSF3-10 | Ø3.0 | 10 | 2.95 | 3.35 | 5.45 | 1.20 | 0.15 | 1 | 3.0 | 3.06 | £0.34 |
|
|
| DSF3-12 | Ø3.0 | 12 | 2.95 | 3.35 | 5.45 | 1.20 | 0.15 | 1 | 3.0 | 3.06 | £0.38 |
|
|
| DSF4-10 | Ø4.0 | 10 | 4.00 | 4.35 | 7.25 | 1.50 | 0.40 | 2 | 4.0 | 4.08 | £0.43 |
|
|
| DSF4-12 | Ø4.0 | 12 | 4.00 | 4.35 | 7.25 | 1.50 | 0.40 | 2 | 4.0 | 4.08 | £0.43 |
|
|
| DSF4-16 | Ø4.0 | 16 | 4.00 | 4.35 | 7.25 | 1.50 | 0.40 | 2 | 4.0 | 4.08 | £0.48 |
|
|
| DSF5-12 | Ø5.0 | 12 | 5.00 | 5.35 | 9.10 | 1.80 | 0.40 | 2 | 5.0 | 5.08 | £0.57 |
|
|
| DSF5-16 | Ø5.0 | 16 | 5.00 | 5.35 | 9.10 | 1.80 | 0.40 | 2 | 5.0 | 5.08 | £0.80 |
|
|
| DSF5-20 | Ø5.0 | 20 | 5.00 | 5.35 | 9.10 | 1.80 | 0.40 | 2 | 5.0 | 5.08 | £0.68 |
|
|
| DSF6-16 | Ø6.0 | 16 | 6.00 | 6.35 | 10.80 | 2.20 | 0.40 | 2 | 6.0 | 6.08 | £0.77 |
|
|
| DSF6-20 | Ø6.0 | 20 | 6.00 | 6.35 | 10.80 | 2.20 | 0.40 | 2 | 6.0 | 6.08 | £1.07 |
|
Material
Low Carbon Steel
(Series HP210) - self-colour, not plated cold formed pin.
Features
• Simple, low cost assembly
• Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly.
• Drive studs do not require lock washers to prevent back-out.
Other Info.
Designed for standard metric hole sizes and installation by hammer or press, drive studs are cold formed pins with helical knurls and are used to replace screws where the need to remove the pin is unlikely.
Drive studs are made in low carbon steel and as the knurl has to cut its way into the walls of the hole, they are designed for use with unhardened materials such as mild steel, aluminium, brass and plastics.
We offer the flat headed type which is more easily adapted to automated assembly systems.
Downloads
PDF Documents : Catalogue Page
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login