Ondrives: Mechanical - Dowel & Spring Pins - SCP1-2 : Split Cotter Pins - Steel

SCP1-2 : Steel Split Cotter Pins

Mechanical » Dowel & Spring Pins »
SCP Type : 1.0 - 2.0 Dia. Steel Split Cotter Pins - DIN 94 / ISO 1234

SCP & SCPS Split Cotter Pins

Discounts

1+ 0%

6+ 12%

20+ 25%

60+ 37%

100+ 42%

200+ 48%

500+ 55%

1000+ 65%

2000+ 70%

Part Number	To Suit Hole Ø	Ød1 Min.	Ød1 Max.	a Min.	a Max.	L	Cost Steel	Quantity	Order
SCP1.0-6	1.0	0.80	0.90	0.80	1.60	6	£0.04
SCP1.0-8	1.0	0.80	0.90	0.80	1.60	8	£0.04
SCP1.0-10	1.0	0.80	0.90	0.80	1.60	10	£0.04
SCP1.0-12	1.0	0.80	0.90	0.80	1.60	12	£0.05
SCP1.0-16	1.0	0.80	0.90	0.80	1.60	16	£0.05
SCP1.0-18	1.0	0.80	0.90	0.80	1.60	18	£0.05
SCP1.0-20	1.0	0.80	0.90	0.80	1.60	20	£0.05
SCP1.0-22	1.0	0.80	0.90	0.80	1.60	22	£0.05
SCP1.0-25	1.0	0.80	0.90	0.80	1.60	25	£0.06
SCP1.0-28	1.0	0.80	0.90	0.80	1.60	28	£0.07
SCP1.0-32	1.0	0.80	0.90	0.80	1.60	32	£0.09
SCP1.0-36	1.0	0.80	0.90	0.80	1.60	36	£0.09
SCP1.2-10	1.2	1.09	1.00	1.25	2.50	10	£0.05
SCP1.2-12	1.2	1.09	1.00	1.25	2.50	12	£0.05
SCP1.2-16	1.2	1.09	1.00	1.25	2.50	16	£0.05
SCP1.2-18	1.2	1.09	1.00	1.25	2.50	18	£POA
SCP1.2-20	1.2	1.09	1.00	1.25	2.50	20	£0.06
SCP1.2-22	1.2	1.09	1.00	1.25	2.50	22	£0.06
SCP1.2-25	1.2	1.09	1.00	1.25	2.50	25	£0.06
SCP1.2-28	1.2	1.09	1.00	1.25	2.50	28	£0.07
SCP1.2-32	1.2	1.09	1.00	1.25	2.50	32	£0.07
SCP1.2-36	1.2	1.09	1.00	1.25	2.50	36	£0.08

Part Number	To Suit Hole Ø	Ød1 Min.	Ød1 Max.	a Min.	a Max.	L	Cost Steel	Quantity	Order
SCP1.6-10	1.6	1.30	1.40	1.25	2.50	10	£0.04
SCP1.6-12	1.6	1.30	1.40	1.25	2.50	12	£0.04
SCP1.6-16	1.6	1.30	1.40	1.25	2.50	16	£0.04
SCP1.6-18	1.6	1.30	1.40	1.25	2.50	18	£0.05
SCP1.6-20	1.6	1.30	1.40	1.25	2.50	20	£0.05
SCP1.6-22	1.6	1.30	1.40	1.25	2.50	22	£0.05
SCP1.6-25	1.6	1.30	1.40	1.25	2.50	25	£0.05
SCP1.6-28	1.6	1.30	1.40	1.25	2.50	28	£0.06
SCP1.6-32	1.6	1.30	1.40	1.25	2.50	32	£0.06
SCP1.6-36	1.6	1.30	1.40	1.25	2.50	36	£0.07
SCP2.0-10	2.0	1.70	1.80	1.25	2.50	10	£0.04
SCP2.0-12	2.0	1.70	1.80	1.25	2.50	12	£0.04
SCP2.0-16	2.0	1.70	1.80	1.25	2.50	16	£0.04
SCP2.0-18	2.0	1.70	1.80	1.25	2.50	18	£0.04
SCP2.0-20	2.0	1.70	1.80	1.25	2.50	20	£0.04
SCP2.0-22	2.0	1.70	1.80	1.25	2.50	22	£0.04
SCP2.0-25	2.0	1.70	1.80	1.25	2.50	25	£0.05
SCP2.0-28	2.0	1.70	1.80	1.25	2.50	28	£0.05
SCP2.0-32	2.0	1.70	1.80	1.25	2.50	32	£0.06
SCP2.0-36	2.0	1.70	1.80	1.25	2.50	36	£0.06
SCP2.0-40	2.0	1.70	1.80	1.25	2.50	40	£0.07
SCP2.0-45	2.0	1.70	1.80	1.25	2.50	45	£0.08
SCP2.0-50	2.0	1.70	1.80	1.25	2.50	50	£0.09

Material
Low Carbon Steel

Other Info.
Cotter pins are made to DIN 94 and are also equal to ISO 1234 and BS 1574.
Can be zinc plated or phosphate coated, but since such finishes cannot be applied to the inside faces of the pin,
only stainless can be recommended where full corrosion resistance is needed.

Downloads
PDF Documents : Catalogue Page | Full Range of Spring Pins