Ondrives: Linear - Supersmart Bearings & Housings - LSB & LSB-AJ Type : Super Smart Ball Bushing™ Bearing Pillow Blocks - Closed Type

LSB & LSB-AJ Type : Super Smart Ball Bushing™ Bearing Pillow Blocks - Closed Type

Linear » Supersmart Bearings & Housings »
LSB & LSB-AJ Type : Super Smart Ball Bushing™ Bearing Pillow Blocks Closed Type - Fixed & Adjustable

LSB LSB-AJ Super Smart Ball Bushing Bearing Pillow Blocks

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Number	Ød⁽⁵⁾	H^±0.02	H1	A	A1^±0.02	B	E^±0.1	E1^±0.1	N Dia.	N2	Mass (kg)	Dynamic Load W⁽¹⁾⁽²⁾	Load Limit Wo⁽²⁾⁽⁴⁾	Cost	Quantity	Add to Basket
FIXED
LSB-8	8	15	28	35	17.5	32	20	25	3.3	M4	0.07	310	340	£86.58
LSB-12	12	18	35	43	21.5	39	23	32	4.3	M5	0.13	650	715	£85.73
LSB-16	16	22	42	53	26.5	43	26	40	5.3	M6	0.21	2200	2400	£94.79
LSB-20	20	25	50	60	30.0	54	32	45	6.6	M8	0.35	4000	4400	£110.91
LSB-25	25	30	60	78	39.0	67	40	60	8.4	M10	0.67	6700	7300	£203.12
LSB-30	30	35	71	87	43.5	79	45	68	8.4	M10	0.99	8300	9100	£166.37
LSB-40	40	45	91	108	54.0	91	58	86	10.5	M12	1.84	13700	15000	£239.75
ADJUSTABLE
LSB-8AJ	8	15	28	35	17.5	32	20	25	3.3	M4	0.07	310	340	£105.80
LSB-12AJ	12	18	35	43	21.5	39	23	32	4.3	M5	0.13	650	715	£116.16
LSB-16AJ	16	22	42	53	26.5	43	26	40	5.3	M6	0.21	2200	2400	£122.28
LSB-20AJ	20	25	50	60	30.0	54	32	45	6.6	M8	0.35	4000	4400	£136.35
LSB-25AJ	25	30	60	78	39.0	67	40	60	8.4	M10	0.67	6700	7300	£172.02
LSB-30AJ	30	35	71	87	43.5	79	45	68	8.4	M10	0.99	8300	9100	£202.66
LSB-40AJ	40	45	91	108	54.0	91	58	86	10.5	M12	1.84	13700	15000	£305.31

Material
Housing: Aluminium - Bearing Fitted

Other Info.
Super Smart Ball Bushing™ Bearing fitted.

Designed for use with Hard Linear Shafting (Z-A & Z-B Type) (h6 Tolerance)
(1) For rated travel life of 100km. For longer travel lives, reduce load to W x (100/Life)^0.33 where (km) is the required travel life.
Do not exceed the Dynamic Load Rating for travel life of less than 100km.
(2) The load Limit is the maximum load that may be applied to a bearing/shaft.
It is important to analyze the application so that peak and/or shock do not exceed the Load Limit.
(4) The load capacities W and W0 are valid for a resultant load applied at 90° with the ball tracks oriented as shown in the polar graphs on the Technical pages.
If the resultant acts along another direction, the appropriate multiplicative correction factor, K0, should be applied to W and W0 respectively.
Open type bearings have reduced load capacities when used in pull-off situations.
(5) Adjusted to nominal.

Standard Diametral Clearances (Closed Type)
Nom. Size Ød (mm)	Diametral Clearance (µm)
8	+23 +2
12	+26 +3
16	+26 +3
20	+30 +4
25	+30 +4
30	+30 +4
40	+35 +5

Downloads
DXF Drawings (Zip archived) : LSB-8 | LSB-12 | LSB-16 | LSB-20 | LSB-25 | LSB-30 | LSB-40
PDF Documents : Catalogue Page | Technical | All Super Smart Ball Bushing™ Pages