• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

LSP-A LSP-C Type : Super Smart Ball Bushing™ Bearings

Linear » Supersmart Bearings & Housings »
LSP-A & LSP-C Type : Super Smart Ball Bushing™ Bearings : Open Fixed & Closed Adjustable

LSP Super Smart Ball Bushing Bearings

Discounts 1+ 0% 20+ 5% 40+ 10% 60+ 15% 100+ 20% 200+ 35%

Part
Number		 d(4) D Ch14 C1H13 C2
min. 		E±0.1 F Angle
(deg) 		No. of
Ball
Tracks 		Mass
(kg) 		Dynamic
Load
W(1)(3)		 Load
Limit
Wo(2)(3)		 Cost Quantity Add to
Basket

OPEN FIXED
LSP12C 12 22 32 22.6 1.30 7.0 1.35 70 4 0.018 750 825 £54.46
LSP16C 16 26 36 24.6 1.30 9.0 0.00 70 8 0.023 2200 2400 £67.74
LSP20C 20 32 45 31.2 1.60 10.0 0.00 50 8 0.054 4000 4400 £76.57
LSP25C 25 40 58 43.7 1.85 12.5 1.50 60 8 0.107 6700 7300 £95.68
LSP30C 30 47 68 51.7 1.85 13.7 2.00 55 8 0.163 8300 9100 £111.71
LSP40C 40 62 80 60.3 2.15 19.0 1.50(5) 54 8 0.315 13700 15000 £150.03

CLOSED ADJUSTABLE
LSP8A 8 16 25 16.2 1.10 - - - 4 0.016 310 340 £38.03
LSP12A 12 22 32 22.6 1.30 - - - 5 0.023 650 715 £42.48
LSP16A 16 26 36 24.6 1.30 - - - 10 0.030 2200 2400 £50.32
LSP20A 20 32 45 31.2 1.60 - - - 10 0.066 4000 4400 £58.50
LSP25A 25 40 58 43.7 1.85 - - - 10 0.135 6700 7300 £74.70
LSP30A 30 47 68 51.7 1.85 - - - 10 0.206 8300 9100 £85.90
LSP40A 40 62 80 60.3 2.15 - - - 10 0.392 13700 15000 £121.89

Material
Carbon Steel
Temperature Range: -20°C to +80°C

Other Info.

(1) For rated travel life of 100km. For longer travel lives, reduce load to W x (100/Life)0.33 where (km) is the required travel life.
Do not exceed the Dynamic Load Rating for travel life of less than 100km.
(2) The load Limit is the maximum load that may be applied to a bearing/shaft. It is important to analyse the application so that peak and/or shock do not exceed the Load Limit.
(3) The load capacities W. and We are valid for a resultant load applied at 90° with the ball tracks orientated as shown in the polar graphs in the Technical pages.
If the resultant acts along another direction, the appropriate multiplicative correction factor Ke, should be applied to W and We respectively.
Open type bearings have reduced load capacities when used in pull-off situations.
(4) Internal bearing diameter is affected by the housing bore.
(5) Hole for anti-rotation pin is below centreline.

Downloads
PDF Icon PDF Documents : Catalogue Page | Technical | All Super Smart Ball Bushing™ Pages

Sign in, or register: Why register? | Forgot password?