Ondrives: Linear - Splined Shafts - LSAG25-50 - Precision Linear Rotary Ball Splines

LSAG25-50 : Precision Linear Rotary Ball Splines

Linear » Splined Shafts »
LSAG Type : Size 25 - 50 Precision Linear Rotary Ball Spline : Angular Type G - 2 Row 4 Point Ball C

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Number	Weight g		Dimensions									Rating						Cost	Quantity	Add to Basket
Part Number	External Cylinder	Spline Shaft	ØD***	L1	L2	W	t	k	d2⁽¹⁾	Ød	L	Basic Dynamic Load Rating C N	Basic Static Load Rating Co N	Dynamic Rated Torque T Nm	Static Rated Torque T Nm	Static Rated Moment⁽²⁾ TX Nm	Static Rated Moment⁽²⁾ TY Nm	Cost	Quantity	Add to Basket
LSAG25300	-	930	-	-	-	-	-	-	-	22.600 22.579	300	11200 15400	14300 23200	139 193	178 290	^92.8/_551.0 ^229.0/_1190.0	¹¹¹/₆₅₆ ²⁷³/₁₄₂₀	£120.30
LSAG25400	-	1240	-	-	-	-	-	-	-	22.600 22.579	400							£152.09
LSAG25500	-	1550	-	-	-	-	-	-	-	22.600 22.579	500							£183.92
LSAG25600	-	1860	-	-	-	-	-	-	-	22.600 22.579	600							£215.71
LSAG25800	-	2480	-	-	-	-	-	-	-	22.600 22.579	800							£279.28
LSAG251100	-	3410	-	-	-	-	-	-	-	22.600 22.579	1100							£384.05
LSAG251200	-	3720	-	-	-	-	-	-	-	22.600 22.579	1200							£451.36
LSAG25-C	220	-	37.000 36.984	60	39.2	5.000 4.982	3.0	29	19.4	-	-							£119.34
LSAGL25-C	336	-	37.000 36.984	84	63.2	5.000 4.982	3.0	29	19.4	-	-							£169.71
LSAG30400	-	1800	-	-	-	-	-	-	-	27.200 26.179	400	15400 21300	19400 31600	231 320	292 474	^147.0/_874.0 ^364.0/_1900.0	¹⁷⁶/₁₀₄₀ ⁴³⁴/₂₂₆₀	£158.87
LSAG30500	-	2250	-	-	-	-	-	-	-	27.200 26.179	500							£193.07
LSAG30600	-	2700	-	-	-	-	-	-	-	27.200 26.179	600							£227.08
LSAG30700	-	3150	-	-	-	-	-	-	-	27.200 26.179	700							£261.12
LSAG301100	-	4950	-	-	-	-	-	-	-	27.200 26.179	1100							£408.68
LSAG301200	-	5400	-	-	-	-	-	-	-	27.200 26.179	1200							£499.50
LSAG30-C	430	-	45.000 44.984	70	43.0	7.000 7.022	4.0	35	23.5	-	-							£134.11
LSAGL30-C	634	-	45.000 44.984	98	71.0	7.000 7.022	4.0	35	23.5	-	-							£198.34
LSAG40400	-	3232	-	-	-	-	-	-	-	37.200 37.175	400	21300	31600	426	632	^364.0//₁₉₄₀_.0	^434/₂₃₁₀	£229.67
LSAG40500	-	4040	-	-	-	-	-	-	-	37.200 37.175	500							£275.56
LSAG40600	-	4848	-	-	-	-	-	-	-	37.200 37.175	600							£317.72
LSAG40700	-	5656	-	-	-	-	-	-	-	37.200 37.175	700							£363.69
LSAG401100	-	8888	-	-	-	-	-	-	-	37.200 37.175	1100							£543.57
LSAG401200	-	9696	-	-	-	-	-	-	-	37.200 37.175	1200							£589.54
LSAG40-C	760	-	60.000 59.981	100	70.8	10.000 10.022	4.5	55	33.5	-	-							£287.98
LSAG50400	-	5280	-	-	-	-	-	-	-	46.600 46.575	400	28300	36100	707	904	^389.0//₂₃₀₀_.0	^464/₂₇₄₀	£POA
LSAG50500	-	6600	-	-	-	-	-	-	-	46.600 46.575	500							£POA
LSAG50600	-	7920	-	-	-	-	-	-	-	46.600 46.575	600							£POA
LSAG50700	-	9240	-	-	-	-	-	-	-	46.600 46.575	700							£POA
LSAG501100	-	14520	-	-	-	-	-	-	-	46.600 46.575	1100							£POA
LSAG501200	-	15840	-	-	-	-	-	-	-	46.600 46.575	1200							£POA
LSAG50-C	1140	-	75.000 74.981	100	66.4	15.000 15.027	5.0	50	42.0	-	-							£POA

Material
Rail & Carriage: Carbon Steel End Caps: Synthetic Resin End Rail: Rubber
For temperatures over 100°C we can supply special high temperature grease (200°C - supplied in syringe) CG2-SY

Performance
Maximum Speed: 3 m/sec
Maximum Temperature: +100°C (Constant) +120°C (Intermittent)
Loads & Torques need de-rating for Static safety factors 3~7, or Dynamic 1~3

Other Info.
Prices for different lengths of rail, hollow shaft or end machining options are available on request contact Sales for more details.
Preload is available on request, depending on factory production. Standard Precision Grade supplied 0.033**. Two further Grades are available P.O.A. - High Grade (H) 0.013** & Precision Grade (P) 0.006**. Prices for different lengths of rail are available on request. Carriages may be removed without danger of the balls dropping out. The spline raceways are hardened only, but on small diameters the whole shaft may be hard.

Notes
* No seals.
** Twist of grooves with respect to effective length (100mm) of spline part. (Other accuracy figures are available on request).
*** Mating housing bore, fit with suitable jig fixtures, transition fit (J7) or clearance fit (H7) where high accuracy and rigidity are not required.
1) Max diameter when machining done at shaft ends.
2) The upper figure refers to one carriage whereas the lower figure applies to two carriages in close contact as shown opposite.

Downloads
DXF Drawings (Zip archived): LSAG25-C | LSAG30-C
PDF Documents : Catalogue Pages| Full LSAG & LSAGF Range