Ondrives: Linear - Polygon Shafts & Couplings - PW - Polygon Shafts

PW : Polygon Shafts

Linear » Polygon Shafts & Couplings »
PW : Polygon Shafts

Dimension "e" is used in the calculation of the R radius which sets the form and position of the curved face of the polygon shaft.
(This is the basis of the DIN 32712 standard). R = b/2 + 16 x e

Discounts

1+ 0%

6+ 15%

20+ 20%

40+ 25%

60+ 30%

100+ 40%

Part Number 500mm	Part Number 1000mm	Dimensions					Tolerances		Moments of Inertia		Cross Section Area A cm²	Weight Kg/m	Cost	Quantity	Add to Basket	Cost	Quantity	Add to Basket
Part Number 500mm	Part Number 1000mm	b	d1	R	e	ßmax	b	d1	Polar Wp cm³	Equatorial Wx cm³	Cross Section Area A cm²	Weight Kg/m	Cost	Quantity	Add to Basket	Cost	Quantity	Add to Basket
PW14-11-500	PW14-11-1000	11	14	31.1	1.6	33.7°	-0.01 -0.05	-0.060 -0.122	0.27	0.20	1.23	0.97	£46.56			£93.15
PW20-17-500	PW20-17-1000	17	20	56.5	3.0	28.8°	-0.01 -0.05	-0.060 -0.122	0.98	0.74	2.69	2.11	£59.27			£118.56
PW25-21-500	PW25-21-1000	21	25	90.5	5.0	30.7°	-0.01 -0.05	-0.060 -0.122	1.85	1.39	4.15	3.25	£77.61			£155.26
PW30-25-500	PW30-25-1000	25	30	92.5	5.0	30.9°	-0.01 -0.05	-0.060 -0.122	3.13	2.34	5.94	4.66	£105.84			£211.74
PW35-30-500	PW35-30-1000	30	35	95.0	5.0	28.1°	-0.01 -0.06	-0.060 -0.122	5.40	4.05	8.29	6.50	£132.67			£265.39
PW40-35-500	PW40-35-1000	35	40	113.5	6.0	26.3°	-0.01 -0.06	-0.060 -0.122	8.58	6.43	11.04	8.66	£159.50			£319.04
PW45-40-500	PW45-40-1000	40	45	116.0	6.0	24.5°	-0.01 -0.06	-0.060 -0.122	12.80	9.60	14.18	11.13	£194.79			£389.61
PW50-43-500	PW50-43-1000	43	50	117.5	6.0	27.0°	-0.01 -0.06	-0.060 -0.122	15.90	11.93	16.97	13.32	£252.67			£505.38
PW60-53-500	PW60-53-1000	53	60	122.5	6.0	24.3°	-0.01 -0.06	-0.060 -0.122	29.78	22.33	25.06	19.67	£334.55			£669.16
PW70-60-500	PW70-60-1000	60	70	126.0	6.0	26.2°	-0.01 -0.06	-0.060 -0.122	43.20	32.40	33.17	26.00	£398.09			£796.22

Material
Shaft: Steel C45. Steel C45 Nitrided available P.O.A.
Shaft can be cut to required length and finished on request
Profile P4C to DIN 32712. Other qualities available on request.
Max lengths: 4000mm (standard), 700mm (Nitrided) available P.O.A.

Downloads

PDF Documents : Catalogue Page | Technical | Full Product Range