BM & BMX : to suit T & T-SS Track
Linear » Linear Slides »
BM & BMX : Support Bushings (Standard Profile)
* Concentric (stationary) bushing - since concentrically mounted wheels have a fixed position, these bushings set the alignment of the carriage assembly to the rail.
Concentrically mounted wheels should be configured to carry the majority of the load whenever possible.
** Eccentric (adjustable) bushing - rotation of eccentric allows adjustment between track and guide wheels.
| Discounts | 1+ 0% | 20+ 5% | 40+ 10% | 60+ 15% | 100+ 20% | 200+ 35% |
| Part Number | Dual Vee Size |
Fastener Size |
Hex Size HS |
Offset EC† |
Head Height HH(1) |
Length Body LB |
Overall Length LO |
Outside Dia. OD(2) |
Inside Dia. ID |
Head Dia. HD |
Steel | Stainless | |||||
| Steel | Stainless | Cost | Quantity | Order | Cost | Quantity | Order | ||||||||||
| Concentric: | |||||||||||||||||
| BM-1 | BM-1SS | 1 | M4 | - | - | 6.22 | 7.6 | 13.8 | 4.76 | 4.01 | 11.2 | £4.67 |
|
£8.10 |
|
||
| BM-2 | BM-2SS | 2 | M6 | - | - | 6.65 | 10.8 | 17.9 | 9.52 | 6.10 | 14.2 | £5.35 |
|
£10.71 |
|
||
| BM-3 | BM-3SS | 3 | M8 | - | - | 9.47 | 15.6 | 25.1 | 11.99 | 8.10 | 19.1 | £8.28 |
|
£15.48 |
|
||
| BM-4 | BM-4SS | 4 | M10 | - | - | 11.10 | 18.8 | 29.9 | 15.00 | 10.11 | 22.4 | £9.05 |
|
£24.33 |
|
||
| Eccentric: | |||||||||||||||||
| BMX-1 | BMX-1SS | 1 | M4 | 12 | 0.18 | 6.22 | 7.6 | 13.8 | 4.76 | 4.01 | - | £8.77 |
|
£16.54 |
|
||
| BMX-2 | BMX-2SS | 2 | M6 | 14 | 0.61 | 6.65 | 10.8 | 17.9 | 9.52 | 6.10 | - | £9.53 |
|
£19.82 |
|
||
| BMX-3 | BMX-3SS | 3 | M8 | 19 | 1.07 | 9.47 | 15.6 | 25.1 | 11.99 | 8.10 | - | £13.51 |
|
£27.27 |
|
||
| BMX-4 | BMX-4SS | 4 | M10 | 22 | 1.52 | 11.10 | 18.8 | 29.9 | 15.00 | 10.11 | - | £14.92 |
|
£36.47 |
|
||
(1) Head height (HH) Tolerance is ±0.05mm.
(2) The bushing's outside diameter is designed to fit the corresponding size DualVee guide wheel.
Material
Bushings: Leaded screw stock, plated finish or stainless steel.
BMX: Adjustable bushing. Eccentric mounting hole. By rotating the BMX bushing on its mounting bolt, the clearance between the wheel and the track can be adjusted.
BM: Stationary bushing. Concentric mounting hole. The major load should be carried on the stationary bushing.
Features (Support Bushing)
•Rigidly affixes guide wheels to a mounting surface precisely
•Material options include 303 stainless steel or nickel plated carbon steel
•Concentric and eccentric configurations allow for system adjustment
•Customer to supply screw/bolt to fix wheel bush assembly to mounting surface
•Standard and low profile head height configurations are available to suit space requirements
•Head Height (HH) Tolerance is ±0.05mm
•Outside diameter of bushing is designed to fit the corresponding size DualVee guide wheel
Downloads
PDF Documents : Catalogue Page | Technical | Full Range of Dual-Vee™ Slides
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login