Ondrives: Linear - Linear Slides - RS - to suit 10-60mm Shafts

RS : to suit 10-60mm Shafts

Linear » Linear Slides »
RS : Linear Drive Nuts (Backlash Free)

RS : Linear Drive Nuts (Backlash Free)

Discounts

1+ 0%

Part Number	To Suit Shafts	a*	a1*	b	c	d^h6	e	f	Weight m (kg)	g	h^±0.3	i	k	l	q	Max. Available Side Thrust FRS (N)	Idling Torque MO (Ncm)	Max. Pitch h	Linear Drive Nuts			Shafts To Suit
Part Number	To Suit Shafts	a*	a1*	b	c	d^h6	e	f	Weight m (kg)	g	h^±0.3	i	k	l	q	Max. Available Side Thrust FRS (N)	Idling Torque MO (Ncm)	Max. Pitch h	Cost	Quantity	Order	Cost	Quantity	Order
RS3-10-4	Z-10-1000A	47	65	35	35	10	30	18	0.14	M4	17.3	M3	26	6	5	100	1.8	5.0	£POA			£29.77
RS4-10-4	Z-10-1000A	55	73	35	35	10	30	18	0.18	M4	17.3	M3	26	6	5	200	3.0	5.0	£POA			£29.77
RS4-15-4	Z-15-1000A	62	82	40	40	15	26	18	0.23	M4	19.6	M4	30	8	5	260	5.0	7.5	£POA			£51.37
RS4-20-4	Z-20-1000A	83	108	52	52	20	40	30	0.55	M5	26.0	M5	40	11	8	420	10.0	10.0	£POA			£38.28
RS4-25-4	Z-25-1000A	85	110	60	60	25	40	30	0.70	M5	29.4	M5	45	10	9	600	20.0	12.5	£POA			£55.31
RS4-35-4	Z-35-1000A	105	126	80	80	35	50	40	1.55	M6	40.0	M6	60	12	13	900	45.0	17.5	£POA			£POA
RS4-50-3	Z-50-1000A	120	140	100	100	50	50	50	2.70	M8	48.8	-	-	-	16	1300	140.0	25.0	£POA			£172.73
RS4-60-3	Z-60-1000A	130	156	120	120	60	69	62	4.20	M10	58.4	-	-	-	15	2000	200.0	30.0	£POA			£245.90

Note: Shafts are CK53 and 1000mm long as standard. *If wipers are used, dimension a becomes a1.

Material
Housing: Aluminium
Bearings: Tool/bearing Steel
Inserts: Plastics

Features
•Backlash-free
•Overload protection
•Low maintenance
•Linked nuts for higher side thrust
•Resistant to vibrations
•High efficiency
•Free-movement lever
•Left and right-hand pitch on the same shaft

•Compact design
•Quiet in operation
•Good sealing possibilities
•Typical applications:
- Linear motion drives
- Measurement and inspection technology
- Materials handling systems
- Control systems

Extra components available to buy - POA

F - Free Movement Lever, mechanical:
When operated, the nut can slide freely along the shaft.

Adapter:
For twist free coupling systems.

Wipers:
For sealing between nut and shaft (to +70°C). Attention! For units with wipers please note dimension a1.

R - Steady Rollers:
Rolls on Linear Drive Nut (in conjunction with a guide bar) prevent the rotation of the nut on the shaft.

Linear drive nuts are non-positive drives which convert the rotation of a plain round shaft into linear motion. The effect is achieved by pressing specially crowned rolling rings against the shaft and allowing them to roll on the surface of the shaft at an angle which determines their pitch.

Downloads
PDF Documents : Catalogue Pages | Technical