Ondrives: Linear - Linear Slides - CLWL9-20 - 9-20mm Rail Load up to 960N

CLWL9-20 : Load up to 960N

Linear » Linear Slides »
CLWL Type : CL Series : 9mm-20mm Rail Width

CLWL Precision Linear Slides CL Series

When ordering track rail, please order the correct number of carriages for your application

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Number	Track Rail Length L	No. of Holes	Maximum Track Length	Cost	Quantity	Add to Basket
CLWL960	60	3	1000	£30.05
CLWL9120	120	6		£44.84
CLWL9240	240	12		£82.19
CLWL9480	480	24		£156.65
CLWL9720	720	36		£236.45
CLWL9-C	Carriage	-		£53.92
CLWL1250	50	2	1500	£26.41
CLWL12100	100	4		£40.66
CLWL12200	200	8		£69.36
CLWL12400	400	16		£126.70
CLWL121000	1000	40		£315.36
CLWL12-C	Carriage	-		£57.24
CLWL1580	80	2	1520	£31.03
CLWL15120	120	3		£42.97
CLWL15240	240	6		£78.80
CLWL15480	480	12		£155.21
CLWL15960	960	24		£336.78
CLWL15-C	Carriage	-		£66.81
CLWL20120	120	2	1560	£47.91
CLWL20240	240	4		£96.06
CLWL20480	480	8		£189.09
CLWL20960	960	16		£378.77
CLWL201440	1440	24		£600.42
CLWL20-C	Carriage	-		£73.57

	Part Number Carriage CLWL9-C	Part Number Carriage CLWL12-C	Part Number Carriage CLWL15-C	Part Number Carriage CLWL20-C	Figures shown in To column and upper figures of all Tx and Ty of each model number apply to one slide unit as illustrated. The values shown below the single case figures for Tx and Ty are for two slide units in close contact on the same rail.
Mass (g)
Carriage (Slide Unit)	19	35	64	133
Track Rail per 100mm	35	65	107	156
Dimensions of Assembly (mm)
H ±0.020	10	13	16	20
H1	2	3	4	5
N ±0.025	5.5	7.5	8.5	10.0
Dimensions of Slide Unit (mm)
W2	20	27	32	40
W3	15	20	25	30
W4	2.5	3.5	3.5	5.0
L1	30	34	42	50
L2	10	15	20	25
L3	20.8	21.6	27.8	34.6
L4	-	-	47	55
M1	M3 x 3.0	M3 x 3.5	M3 x 4.0	M4 x 6.0
H3	2.2	2.7	3.1	4.2
Slide Unit Shoulder Height h1	4	4	5	5
Corner Radius R	0.4	0.4	0.4	0.4
Dimensions of Track Rail (mm)
W	9	12	15	20
H4	6	8	10	11
d3	3.5	3.5	3.5	6.0
d4	6.0	6.5	6.5	9.5
h	3.5	4.5	4.5	5.5
E	10.0	12.5	20.0	30.0
F	20	25	40	60
Track Rail Shoulder Height h2	2.0	2.0	2.5	2.5
Track Rail Mounting Bolt	M3 x 8	M3 x 8	M3 x 10	M5 x 14
Ratings
Basic Dynamic Load Rating C kgf	160	300	450	590
Basic Static Load Rating Co kgf	290	450	690	960
Static Rated Moment To kgf·m	1.4	2.8	5.3	9.8
Static Rated Moment Tx kgf·m	0.96 5.40	1.60 9.90	3.10 18.20	5.60 29.60
Static Rated Moment Ty kgf·m	0.81 4.50	1.40 8.30	2.60 15.20	4.70 24.90

Material
Rail, Carriage & Balls: Stainless Steel. Hardened similar to 440C End Plates: Synthetic Resin End Seals: Rubber.

Performance : Track Rail
Max. Speed: 3m/sec.
Max. Continuous Temperature: +100°C
Max. Intermittent Temperature: +120°C

Performance : Carriage
Dimension Variation Between Carriage Slide on Same Rail (Std Grade): H=0.015, N=0.020
Parallelism in Operation Over: 500mm=0.012mm, 1000mm=0.018mm (A to C and D to B).
A Higher tolerance grade is available, contact Sales for details
Load Direction: If upward or downward, as table. If lateral, x 0.84.
Dynamic Rating: From a group of the same slide units, 90% achieve a distance of 50 x 10³ metres.
For temperatures over 100°C (max. 120°C) we can supply special high temperature grease (clean room quality supplied in syringe) CG2-SY.

Other Info.
Characteristics: Easy handling (ball retaining band structure prevents balls from falling out).
Easy maintenance. Smooth operation. Low Noise. High High Accuracy. Long life. High reliability..
Lubrication: Every 6 months under general use. Every 3 months for daily use. Use a lithium-soap based grease. (Oil can be used).

Downloads
DXF Drawings (Zip archived) : CLWL9-C I CLWL12-C I CLWL15-C I CLWL20-C
PDF Documents : Catalogue Pages | Technical | Full LWL Range (including Technical)