Ondrives: Linear - Linear Slides - LWL5-9 - 5-9mm Rail Load up to 4180N

LWL5-9 : Load up to 4180N

Linear » Linear Slides »
LWL Type : L Series : 5mm - 9mm Rail Width - Ball Retained

LWL Precision Linear Slides L Series

When ordering track rail, please order the correct number of carriages for your application

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Number	Track Rail Length L	No. of Holes	Maximum Track Length	Cost	Quantity	Order
LWL5-45	45	3	210 Special Lengths P.O.A. Max end butt 915mm	£24.60
LWL5-60	60	4		£28.05
LWL5-90	90	6		£34.94
LWL5-120	120	8		£42.79
LWL5-150	150	10		£51.67
LWL5-180	180	12		£61.52
LWL5-195	195	13		£67.45
LWL5-210	210	14		£51.67
LWL5-C	Carriage (Slide Unit) (Standard Type with oil hole H3)	-		£67.57
LWLC5-C	Carriage (Slide Unit) (Short Type with oil hole H3)	-		£56.81
LWL7-60	60	4	300 Special Lengths P.O.A. Max end butt 915mm	£26.16
LWL7-120	120	8		£39.87
LWL7-150	150	10		£47.00
LWL7-180	180	12		£56.40
LWL7-240	240	16		£77.92
LWL7-300	300	20		£105.32
LWL7-C	Carriage (Slide Unit) (Standard Type with oil hole H3)	-		£57.03
LWLC7-C	Carriage (Slide Unit) (Short Type with oil hole H3)	-		£49.12
LWLG7-C	Carriage (Slide Unit) (Long Type with oil hole H3)	-		£70.27
LWL9-60	60	3	860 Special Lengths P.O.A. Max end butt 915mm	£34.58
LWL9-120	120	6		£51.71
LWL9-180	180	8		£75.45
LWL9-240	240	12		£100.36
LWL9-280	280	14		£117.38
LWL9-320	320	16		£135.69
LWL9-380	380	19		£165.14
LWL9-420	420	21		£186.15
LWL9-480	480	24		£216.95
LWL9-560	560	28		£264.21
LWL9-680	680	32		£331.21
LWL9-720	720	36		£350.70
LWL9-860	860	43		£431.58
LWL9-C	Carriage (Slide Unit) (Standard Type with oil hole H3)	-		£70.12
LWLC9-C	Carriage (Slide Unit) (Short Type with oil hole H3)	-		£55.42
LWLG9-C	Carriage (Slide Unit) (Long Type with oil hole H3)	-		£79.70

	Part Number Carriage LWL5-C	Part Number Carriage LWLC5-C	Part Number Carriage LWL7-C	Part Number Carriage LWLC7-C	Part Number Carriage LWLG7-C	Part Number Carriage LWL9-C	Part Number Carriage LWLC9-C	Part Number Carriage LWLG9-C	Figures shown in To column and upper figures of all Tx and Ty of each model number apply to one slide unit as illustrated. The values shown below the single case figures for Tx and Ty are for two slide units in close contact on the same rail.
Mass (g)
Carriage (Slide Unit)	4.4	3.4	10.0	7.1	14.0	19.0	11.0	28.0
Track Rail per 100mm	12.0	12.0	22.0	22.0	22.0	35.0	35.0	35.0
Dimensions of Assembly (mm)
H±0.020(Std.) (P±0.010)	6.0	6.0	8.0	8.0	8.0	10.0	10.0	10.0
H1	1.0	1.0	1.5	1.5	1.5	2.0	2.0	2.0
N±0.025(Std.) (P±0.015)	3.5	3.5	5.0	5.0	5.0	5.5	5.5	5.5
Dimensions of Slide Unit (mm)
W2	12	12	17	17	17	20	20	20
W3	8	8	12	12	12	15	15	15
W4	2	2	2.5	2.5	2.5	2.5	2.5	2.5
L1	19.0	16.0	23.5	19.0	31.0	30.0	21.5	40.5
L2	-	-	8.0	-	12.0	10.0	-	15.0
L3	12.6	9.6	14.3	9.6	21.6	20.8	11.9	30.9
M1 x Depth	M2 x 1.5 (0.31 Nm)	M2 x 1.5 (0.31 Nm)	M2 x 2.5 (0.31 Nm)	M2 x 2.5 (0.31 Nm)	M2 x 2.5 (0.31 Nm)	M3 x 3.0 (1.1 Nm)	M3 x 3.0 (1.1 Nm)	M3 x 3.0 (1.1 Nm)
h1 (Slide Unit Shoulder Height)	2.0	2.0	2.5	2.5	2.5	3.0	3.0	3.0
H3	1.2	1.2	1.5	1.5	1.5	2.2	2.2	2.2
Dimensions of Track Rail (mm)
W	5	5	7	7	7	9	9	9
H4	3.7	3.7	5.0	5.0	5.0	6.0	6.0	6.0
d3	2.4	2.4	2.4	2.4	2.4	3.5	3.5	3.5
d4	3.6	3.6	4.2	4.2	4.2	6.0	6.0	6.0
h	0.8	0.8	2.3	2.3	2.3	3.5	3.5	3.5
h2 (Track Rail Shoulder Height)	1.2	1.2	1.5	1.5	1.5	2.2	2.2	2.2
E	7.5	7.5	7.5	7.5	7.5	10.0	10.0	10.0
F	15	15	15	15	15	20	20	20
Track Rail Mounting Bolt	M2 x 6	M2 x 6	M2 x 6	M2 x 6	M2 x 6	M3 x 8	M3 x 8	M3 x 8
Ratings
Basic Dynamic Load Rating C N	612	514	1200	856	1510	1610	1070	2080
Basic Static Load Rating Co N	1130	872	1960	1180	2750	2860	1540	4180
Static Rated Moment To Nm	3.0	2.30	7.20	4.3	10.0	13.3	7.2	19.4
Static Rated Moment Tx Nm	2.4 13.3	1.4 8.9	4.9 29.2	1.9 15.4	9.1 52.6	9.4 53.0	3.0 22.2	19.4 102.0
Static Rated Moment Ty Nm	2.0 11.2	1.2 7.4	4.1 24.5	1.6 12.9	7.7 44.1	7.9 44.5	2.5 18.6	16.3 85.6

Material
Rail, Carriage & Balls: Stainless Steel. Hardened similar to 440C End Plates: Synthetic Resin End Seals: Rubber.

Performance : Track Rail
Max. Speed: 3m/sec.
Max. Continuous Temperature: +100°C
Max. Intermittent Temperature: +120°C

Performance : Carriage
Dimension Variation Between Carriage Slide on Same Rail (Std Grade): H=0.015, N=0.020
Dimension Variation Between Carriage Slide on Same Rail (High Precision P Grade P.O.A.): H=0.007, N=0.010
Parallelism in Operation Over: 500mm=0.012mm, 1000mm=0.018mm (A to C and D to B).
A Higher tolerance grade is available, contact Sales for details
Load Direction: If upward or downward, as table. If lateral, dynamic x 1.13 C, static x 1.19 Co.
Dynamic Rating: From a group of the same slide units, 90% achieve a distance of 50 x 10³ metres.
For temperatures over 100°C (max. 120°C) we can supply special high temperature grease (clean room quality supplied in syringe) CG2-SY.
Preload is available (To) zero to minimal clearance, zero to minimal preload, (T1) 0.02 Co preload.

Other Info.
Characteristics: Easy handling (ball retaining band structure prevents balls from falling out).
Easy maintenance. Smooth operation. Low Noise. High High Accuracy. Long life. High reliability..
Lubrication: Every 6 months under general use. Every 3 months for daily use. Use a lithium-soap based grease. (Oil can be used).

Downloads
DXF Drawings (Zip archived) : LWL5-C | LWL7-C | LWL15-C
PDF Documents : Catalogue Pages | Technical | Full LWL Range (including Technical)