LWE45 : Load up to 62400N
Linear » Linear Slides »LWE45 Type : Precision Compact Linear Way - E Series
Four point Contact & Two Row Raceway Design.
When ordering track rail, please order the correct number of carriages for your application
| Discounts | 1+ 0% | 20+ 5% | 40+ 10% | 60+ 15% | 100+ 20% | 200+ 35% |
| Part Number |
Track Rail Length L |
No. of Holes |
Cost | Quantity | Order |
| LWE45-150 | 150 | 2 | £151.71 |
|
|
| LWE45-255 | 255 | 3 | £196.80 |
|
|
| LWE45-360 | 360 | 4 | £241.99 |
|
|
| LWE45-465 | 465 | 5 | £287.10 |
|
|
| LWE45-570 | 570 | 6 | £332.26 |
|
|
| LWE45-675 | 675 | 7 | £377.38 |
|
|
| LWE45-780 | 780 | 8 | £422.49 |
|
|
| LWE45-885 | 885 | 9 | £467.60 |
|
|
| LWE45-990 | 990 | 10 | £504.88 |
|
|
| LWE45-1095 | 1095 | 11 | £557.82 |
|
|
| LWE45-1200 | 1200 | 12 | £603.28 |
|
|
| LWE45-1305 | 1305 | 13 | £648.09 |
|
|
| LWE45-1410 | 1410 | 14 | £693.16 |
|
|
| LWE45-1515 | 1515 | 15 | £738.38 |
|
|
| LWE45-1620 | 1620 | 16 | £783.46 |
|
|
| LWE45-1725 | 1725 | 17 | £828.57 |
|
|
| LWE45-1830 | 1830 | 18 | £873.66 |
|
|
| LWE45-1935 | 1935 | 19 | £918.76 |
|
|
| LWE45-2040 | 2040 | 20 | £963.97 |
|
|
| LWE45-2145 | 2145 | 21 | £1017.26 |
|
|
| LWE45-2250 | 2250 | 22 | £1070.56 |
|
|
| LWE45-2355 | 2355 | 23 | £1123.87 |
|
|
| LWE45-2460 | 2460 | 24 | £1177.29 |
|
|
| LWE45-2565 | 2565 | 25 | £1230.56 |
|
|
| LWE45-2670 | 2670 | 26 | £1283.91 |
|
|
| LWE45-2775 | 2775 | 27 | £1337.25 |
|
|
| LWE45-2880 | 2880 | 28 | £1390.53 |
|
|
| LWE45-2985 | 2985 | 29 | £1443.87 |
|
|
| LWE45-C | Flanged Carriage Mounting from Lower Side |
- | £250.22 |
|
|
| LWE45-cap | Rail Hole Cap | - | £1.72 |
|
| Part Number Carriage LWE45-C |
 Figures shown in To column and upper figures of all Tx and Ty of each model number apply to one slide unit as illustrated. The higher figures are for two slides in close contact on the same rail |
|
|
Dimensions of Slide Unit (mm) |
||
| W2 | 120.00 | |
| W3 | 100.00 | |
| W4 | 10.00 | |
| L1 | 125.00 | |
| L2 | 60.00 | |
| L3 | 81.40 | |
| L4 | 136.00 | |
| d1 | 11.00 | |
| H2 | 15.00 | |
| H3 | 13.00 | |
| Weight (kg) | 2.46 | |
|
Dimensions of Assembly (mm) |
||
| H ±0.08 | 60.00 | |
| H1 | 14.00 | |
| N ±0.10 | 37.50 | |
|
Dimensions of Track Rail (mm) |
||
| W | 45.00 | |
| H4 | 34.00 | |
| d3 | 11.00 | |
| d4 | 17.50 | |
| h | 14.00 | |
| E | 22.50 | |
| F | 105.00 | |
| Weight kg (track rail per 100mm) | 11.20 | |
| Track Rail Mounting Bolt | M10 x 35 | |
|
Ratings |
||
| Bolt Tightening Torque (Nm) | 62.7 | |
| Basic Dynamic Load Rating C N | 46700 | |
| Basic Static Load Rating Co N | 62400 | |
| Static Rated Moment To Nm |
1290 | |
| Static Rated Moment Tx Nm Ty Nm |
697 641 4220 3890 |
|
Material
Rail & Carriage: Carbon Steel Hardened. All faces of
track rail are ground.
End Plates: Synthetic Resin. End Seals: Rubber. Grease Nipple:
Brass
Performance : Track Rail
Max. Speed: 3m/sec.
Max. Rail Length: 2985mm.
Max. Continuous Temperature: +100°C
Max. Intermittent Temperature: +120°C (consult Ondrives Ltd.)
Performance : Carriage
Dimension Variation Between Carriage Slide
on Same Rail: H=0.025, N=0.03
Parallelism in Operation Over: 500mm=0.0125mm, 1000mm=0.018mm,
3000mm=0.032mm (A to C and D to B).
Higher accuracy grades available,
contact Sales for details
Other Info.
Two row raceway with large diameter balls, giving high load capacities with four point contact and models of slide units are available.
Special requests on P.O.A. for butt joining rails, matched sets, high accuracy models, under seals, end seals, scrapers, bellows and preloading as well as much more.
Lubrication: Every 6 months under general use. Every 3 months for daily use. Use a lithium-soap based grease. (Oil can be used).
When ordering track rail, please order carriages required (1, 2, 3, etc.) per rail.
Downloads
PDF Documents : Catalogue Page | Full LWE Range
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login