Ondrives: Linear - Linear Slides - BSPG-SL

BSPG-SL : 12-25mm Width

Linear » Linear Slides »
BSPG-SL Type : Non Re-circulating Ball Type (Rack and Pinion) : 12mm-25mm Rail Width

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Number	Weight g	Nominal Dimensions mm			Max. Stroke Length	Dimensions of Table mm					Dimensions of Bed mm							Basic Dynamic Load Rating C N	Basic Static Load Rating Co N	Cost	Quantity	Order
Part Number	Weight g	W	H	L	Max. Stroke Length	L1	M1	S1	h1	t1	Lb	w	L2	M2	S2	h2	t2	Basic Dynamic Load Rating C N	Basic Static Load Rating Co N	Cost	Quantity	Order
BSPG1225SL	6.5	12	6	25	14	15	M2.6	2.0	5.2	1.2	23.6	7.6	15	M2.6	2.0	3.0	1.0	209	131	£53.42
BSPG1235SL	9.0	12	6	35	24	24	M2.6	2.0	5.2	1.2	33.6	7.6	24	M2.6	2.0	3.0	1.0	256	174	£57.77
BSPG1245SL	11.6	12	6	45	34	34	M2.6	2.0	5.2	1.2	43.6	7.6	34	M2.6	2.0	3.0	1.0	299	218	£61.87
BSPG1540SL	15.8	15	8	40	24	24	M3	2.5	7.0	1.2	37.0	9.6	24	M3	3.0	4.5	1.2	471	309	£55.60
BSPG1550SL	19.6	15	8	50	32	34	M3	2.5	7.0	1.2	47.0	9.6	34	M3	3.0	4.5	1.2	551	387	£60.33
BSPG1560SL	23.5	15	8	60	40	40	M3	2.5	7.0	1.2	57.0	9.6	40	M3	3.0	4.5	1.2	626	464	£72.96
BSPG2040SL	25.5	20	10	40	22	24	M3	3.2	9.0	1.4	37.0	13.8	24	M3	3.5	6.2	1.4	623	384	£60.61
BSPG2050SL	31.8	20	10	50	28	34	M3	3.2	9.0	1.4	47.0	13.8	34	M3	3.5	6.2	1.4	743	493	£72.96
BSPG2060SL	38.1	20	10	60	34	40	M3	3.2	9.0	1.4	57.0	13.8	40	M3	3.5	6.2	1.4	855	603	£85.83
BSPG2070SL	44.4	20	10	70	40	45	M3	3.2	9.0	1.4	67.0	13.8	45	M3	3.5	6.2	1.4	961	713	£94.47
BSPG2080SL	50.5	20	10	80	47	50	M3	3.2	9.0	1.4	77.0	13.8	50	M3	3.5	6.2	1.4	1060	822	£103.16
BSPG2550SL	40.3	25	10	50	26	34	M3	3.5	9.0	1.6	46.0	18.4	34	M3	3.0	5.7	1.6	743	493	£85.83
BSPG2560SL	48.3	25	10	60	32	40	M3	3.5	9.0	1.6	56.0	18.4	40	M3	3.0	5.7	1.6	855	603	£103.16
BSPG2570SL	56.2	25	10	70	38	45	M3	3.5	9.0	1.6	66.0	18.4	45	M3	3.0	5.7	1.6	961	713	£111.40
BSPG2580SL	64.1	25	10	80	44	50	M3	3.5	9.0	1.6	76.0	18.4	50	M3	3.0	5.7	1.6	1060	822	£124.69
BSPG25100SL	80.0	25	10	100	56	60	M3	3.5	9.0	1.6	96.0	18.4	60	M3	3.0	5.7	1.6	1250	1040	£141.81

Material
Slides: Stainless Steel End Stop, Retainer, Rack and Pinion: Synthetic Resin

Performance
Maximum Speed: 0.5 m/sec (30m/min)
Temperature: +100°C (Constant), +120°C (Maximum)

Other Info.
The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail. The Precision Linear Slide series features high performance and durability, making this series suitable for scanning or writing heads of memory storage devices such as hard disk drives. The series is also widely applicable for measuring equipment, IC manufacturing and inspection devices etc.
For the M2.6 holes, slightly smaller threads (M2.5) will fit.
To obtain high accuracy in operating, do not exceed 20% of basic static load rating.
To maximise the accuracy, centre the applied load over the table or bed. Allow enough additional stroke length to avoid reaching the maximum stroke length.
The BSPG Type is recommended when it is difficult to calibrate the position of the retainer in the BSP Type.
The retainer in this type combines the two rows of balls with Pinion gear. The Pinion gear engages with a rack gear to prevent slipping of movement of the retainer to ensure excellent positioning stability.
The BSPG Type has the same extremely smooth movement as the BSP type.
Does not incorporate a mechanical stopper, so it is necessary to add a stopper mechanism to the surrounding equipment when excessive strokes are likely to occur.
The raceways and gear mechanism of the BSPG type is smeared with Perfluoro Polyethers grease containing a Volatile Corrosion Inhibiting Film. In general use, the BPSG type can be used without any additional treatment if it is kept clean.
For temperatures over 100°C we can supply special high temperature grease (200°C - supplied in syringe) CG2-SY

Downloads
PDF Documents : Catalogue Pages | Technical