Ondrives: Linear - Linear Slides - LWL12-15 - 12-15mm Rail Load up to 10100N

LWL12-15 : Load up to 10100N

Linear » Linear Slides »
LWL Type : L Series : 12mm & 15mm Rail Width - Ball Retained

LWL Precision Linear Slides L Series

When ordering track rail, please order the correct number of carriages for your application

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Number	Track Rail Length L	No. of Holes	Maximum Track Length	Cost	Quantity	Order
LWL12-50	50	3	1000 Special Lengths P.O.A. Max end butt 1925mm	£30.52
LWL12-100	100	4		£45.78
LWL12-150	150	6		£62.03
LWL12-200	200	8		£77.92
LWL12-250	250	10		£100.73
LWL12-300	300	12		£123.14
LWL12-400	400	16		£167.07
LWL12-500	500	20		£213.10
LWL12-600	600	24		£268.83
LWL12-700	700	28		£324.50
LWL12-800	800	32		£380.26
LWL12-900	900	36		£436.03
LWL12-1000	1000	40		£483.19
LWL12-C	Carriage (Slide) (Standard Type with oil hole H3)	-		£71.66
LWLC12-C	Carriage (Slide) (Short Type with oil hole H3)	-		£56.72
LWLG12-C	Carriage (Slide) (Long Type with oil hole H3)	-		£85.09
LWL15-80	80	2	1000 Special Lengths P.O.A. Max end butt 1880mm	£45.17
LWL15-120	120	3		£60.76
LWL15-240	240	6		£115.32
LWL15-480	480	12		£238.15
LWL15-600	600	15		£307.83
LWL15-720	720	18		£381.98
LWL15-800	800	20		£431.40
LWL15-880	880	22		£480.88
LWL15-960	960	24		£520.60
LWL15-1000	1000	25		£555.00
LWL15-C	Carriage (Slide) (Standard Type)	-		£77.92
LWLC15-C	Carriage (Slide) (Short Type)	-		£61.19
LWLG15-C	Carriage (Slide) (Long Type)	-		£95.62

	Part Number Carriage LWL12-C (Standard)	Part Number Carriage LWLC12-C (Short)	Part Number Carriage LWLG12-C (Long)	Part Number Carriage LWL15-C (Standard)	Part Number Carriage LWLC15-C (Short)	Part Number Carriage LWLG15-C (Long)	Part Number Carriage LWL20-C (Standard)	Part Number Carriage LWLC20-C (Short)	Part Number Carriage LWLG20-C (Long)	Figures shown in To column and upper figures of all Tx and Ty of each model number apply to one slide unit as illustrated. The values shown below the single case figures for Tx and Ty are for two slide units in close contact on the same rail.
Mass (g)
Carriage (Slide Unit)	35	22	51	64	42	95	133	89	196
Track Rail per 100mm	65	65	65	107	107	107	156	156	156
Dimensions of Assembly (mm)
H±0.020(Std.) (P±0.010)	13	13	13	16	16	16	20	20	20
H1	3	3	3	4	4	4	5	5	5
N±0.025(Std.) (P±0.015)	7.5	7.5	7.5	8.5	8.5	8.5	10.0	10.0	10.0
Dimensions of Slide Unit (mm)
W2	27	27	27	32	32	32	40	40	40
W3	20	20	20	25	25	25	30	30	30
W4	3.5	3.5	3.5	3.5	3.5	3.5	5.0	5.0	5.0
L1	34	25	44	42	32	57	50	38	68
L2	15	-	20	20	-	25	25	-	30
L3	21.6	13.0	32.0	27.8	17.7	42.7	34.6	22.3	52.3
L4	-	-	-	47	36	62	55	42	72
M1	M3 x 3.5 (1.1 Nm)	M3 x 3.5 (1.1 Nm)	M3 x 3.5 (1.1 Nm)	M3 x 4.0 (1.1 Nm)	M3 x 4.0 (1.1 Nm)	M3 x 4.0 (1.1 Nm)	M4 x6.0 (2.5 Nm)	M4 x6.0 (2.5 Nm)	M4 x6.0 (2.5 Nm)
h1 (Slide Unit Shoulder Height)	2.0	2.0	2.5	2.5	2.5	3.0	3.0	3.0	5.0
H3	2.7	2.7	2.7	3.1	3.1	3.1	4.2	4.2	4.2
Dimensions of Track Rail (mm)
W	12	12	12	15	15	15	20	20	20
H4	8	8	8	10	10	10	11	11	11
d3	3.5	3.5	3.5	3.5	3.5	3.5	6.0	6.0	6.0
d4	6.5	6.5	6.5	6.5	6.5	6.5	9.0	9.0	9.0
h	4.5	4.5	4.5	4.5	4.5	4.5	5.5	5.5	5.5
h2 (Track Rail Shoulder Height)	2.5	2.5	2.5	3.0	3.0	3.0	5.0	5.0	5.0
E	12.5	12.5	12.5	20.0	20.0	20.0	30.0	30.0	30.0
F	25	25	25	40	40	40	60	60	60
Track Rail Mounting Bolt	M3 x 8 (1.1 Nm)	M3 x 8 (1.1 Nm)	M3 x 8 (1.1 Nm)	M3 x 10 (1.1 Nm)	M3 x 10 (1.1 Nm)	M3 x 10 (1.1 Nm)	M5 x 14 (5.0 Nm)	M5 x 14 (5.0 Nm)	M5 x 14 (5.0 Nm)
Ratings
Basic Dynamic Load Rating C N	2960	2000	3780	4390	3120	5750	5830	4070	7350
Basic Static Load Rating Co N	4450	2470	6430	6730	4040	10100	9420	5490	13300
Static Rated Moment To Nm	27.6	15.3	39.9	51.8	31.1	77.7	96.1	56.0	136.0
Static Rated Moment Tx Nm	16.0 98.6	5.5 43.3	31.8 174.0	30.8 178.0	12.1 87.6	62.2 351.0	54.6 291.0	20.2 138.0	106.0 549.0
Static Rated Moment Ty Nm	13.4 81.1	4.7 36.3	26.7 146.0	25.9 149.0	10.2 73.5	55.6 294.0	45.8 244.0	16.9 116.0	88.9 461.0

Material
Rail, Carriage & Balls: Stainless Steel. Hardened similar to 440C End Plates: Synthetic Resin End Seals: Rubber.

Performance : Track Rail
Max. Speed: 3m/sec.
Max. Continuous Temperature: +100°C
Max. Intermittent Temperature: +120°C

Performance : Carriage
Dimension Variation Between Carriage Slide on Same Rail (Std Grade): H=0.015, N=0.020
Dimension Variation Between Carriage Slide on Same Rail (High Precision P Grade P.O.A.): H=0.007, N=0.010
Parallelism in Operation Over: 500mm=0.012mm, 1000mm=0.018mm (A to C and D to B).
A Higher tolerance grade is available, contact Sales for details
Load Direction: If upward or downward, as table. If lateral, dynamic x 1.13 C, static x 1.19 Co.
Dynamic Rating: From a group of the same slide units, 90% achieve a distance of 50 x 10³ metres.
For temperatures over 100°C (max. 120°C) we can supply special high temperature grease (clean room quality supplied in syringe) CG2-SY.
Preload is available (To) zero to minimal clearance, zero to minimal preload, (T1) 0.02 Co preload.

Other Info.
Characteristics: Easy handling (ball retaining band structure prevents balls from falling out).
Easy maintenance. Smooth operation. Low Noise. High High Accuracy. Long life. High reliability..
Lubrication: Every 6 months under general use. Every 3 months for daily use. Use a lithium-soap based grease. (Oil can be used).

Downloads
DXF Drawings (Zip archived) : LWL12-C | LWL15-C
PDF Documents : Catalogue Pages | Technical | Full LWL Range (including Technical)