Ondrives: Linear - Linear Slides - LLEHS

LLEHS : 1000-4000mm Lengths

Linear » Linear Slides »
LLEHS : Speedi-Roll Linear Guideance System

Material:
•Rail: Drawn Anodised Aluminium
•Raceways: Hardened Steel
•Base Plate: Anodised Aluminium

Speedi-Roll is a linear guide system with high load carrying capacity, rigidity and torque resistance, consisting of a guide rail and a carriage with either four or six rollers. The rail is composed of a drawn and anodised aluminium body with hardened steel angle raceways fitted on each side. The aluminium base plate of the carriage, which is also anodised, houses the factory-fitted rollers. A special feature of this roller design is the presence of elastic elements around the threaded bolt with which the rollers are adjusted and fixed in the base plate. This unique, patented system avoids the risk of mounting error and thus contributes significantly to a more efficient and cost effective installation.

The units are supplied as standard with a light preload and, in order to cover a wide range of applications, Rino offers three sizes: LLE 15, 25 and 35. This allows for flexibility when selecting a system to meet design parameters. Speedi-Roll guides operate effortlessly and quietly. The high linear speed rating permits shorter cycle times and low friction between the rollers and rail means less power is required to drive the system. The hollow centres in the sizes 25 and 35 rails provide a reduction in mass of the total system and can also be used as channels to carry such things as wires or cables. The rollers are lubricated-for-life, greatly reducing the need for service.

To round-out the programme, roller covers and end stops are also available.

Discounts

1+ 0%

5+ 5%

10+ 10%

20+ 15%

Part Number	Dimensions System			Dimensions Carriage											Cost	Quantity	Add to Basket
Part Number	H	H1	W1	L1	W2	L2	W3	L3	W1	H3	d1	D4	H7	d5	Cost	Quantity	Add to Basket
LLEHS15HZ1-1000/M2	25.0	3.75	65	70	50	60	39.3	45	6.05	6.05	M50	14	-	-	£POA
LLEHS15LZ1-1000/M2	25.0	3.75	65	105	50	35	39.3	35	6.05	6.05	M50	14	-	-	£POA
LLEHS25HZ1-1000/M2	35.5	7.70	80	90	59	70	45.8	60	12.00	12.00	M80	17	3.7	M4	£POA
LLEHS25LZ1-1000/M2	35.5	7.70	80	120	59	40	45.8	40	11.80	11.80	M80	17	3.7	M4	£POA
LLEHS35HZ1-1000/M2	54.3	12.35	120	100	90	70	61.3	65	19.40	19.40	M10	21	4.5	M4	£POA
LLEHS35LZ1-1000/M2	54.3	12.35	120	140	90	50	61.3	50	19.40	19.40	M10	21	4.5	M4	£POA

Part Number	Permissible Load					Weight
Part Number	F_y perm. N	F_z perm. 1)	M_x perm. Nm	M_y perm. Nm	M_z perm. Nm	Rail kg/m	Carriage kg
LLEHS15	700	660	10	12	6	0.9	0.2
LLEHS15L	1000	900	18	21	12		0.3
LLEHS25	1000	1400	28	38	13	1.0	0.4
LLEHS25L	1500	2000	45	53	20		0.5
LLEHS35	2500	2500	70	76	35	2.0	0.9
LLEHS35L	3200	3200	97	106	52		1.3

Part Number	Dimensions Rail
Part Number	W	W4	H2	H4	W5	H5	H6	d2	d3	h	F	E	L^†
LLEHS15	18	24.9	2	17	-	-	10.75	9.5	5.5	8.5	62.5	31.25	1000
LLEHS15L	-	-	-	-	-	-	-	-	-	-	-	-	-
LLEHS25	23	29.9	4	21	11	13	14.70	11.0	6.5	17.0	125.0	62.5	1000
LLEHS25L	-	-	-	-	-	-	-	-	-	-	-	-	-
LLEHS35	36	42.9	7	29	20	15	22.75	11.0	11.0	22.0	250.0	125.0	1000
LLEHS35L	-	-	-	-	-	-	-	-	-	-	-	-	-

Notes:
† Standard rail length is 1000mm. Max rail length for a single rail is 4000mm. However, longer rail lengths may be achieved through the connection of more than one rail. Please contact sales for details.
1) Data for centrally acting loads. In the case of eccentrically acting loads the values should be corrected according to the law of mechanics. In the case of dynamic loads acting in the z-direction Fz should be multiplied by a factor of 0.6.
See technical pages for full part number detailing exact length, carriages and end stops.

Features
•Speed of travel up to 10 m/s
•Straightness 0.05mm/1m
•Load Capacity see tables provided
•Unlimited travel

•Temp. range -20°C to 80°C under constant conditions
•Standard unit is supplied complete with 1 standard carriage, without roller covers and with 2 end stops as standard. Please contact sales for specials.