• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

AWM : Aluminium Shafting for Drylin™ Bearings

Linear » Linear Shafting »
AWM Type : Aluminium Shafting (for Drylin™ Bearings)

AWM Drylin Alumium Shafts for use with igubal DryLin Bearings

Discounts 1+ 0% 20+ 5% 40+ 10% 60+ 15% 100+ 20% 200+ 35%

Part
Number 		Design Shaft
Core 		Diameter
ØD h11 		Length
L 		Weight
Kg 		Cost Quantity Add to
Basket
AWM08-300 Solid Shaft - 8 300 0.043 £16.74
AWM08-600 Solid Shaft - 8 600 0.086 £33.51
AWM08-1000 Solid Shaft - 8 1000 0.144 £55.88
AWM08-2000 Solid Shaft - 8 2000 0.288 £111.83
AWM10-300 Solid Shaft - 10 300 0.065 £18.92
AWM10-600 Solid Shaft - 10 600 0.131 £37.84
AWM10-1000 Solid Shaft - 10 1000 0.218 £63.08
AWM10-2000 Solid Shaft - 10 2000 0.436 £126.24
AWM12-300 Solid Shaft - 12 300 0.097 £22.44
AWM12-600 Solid Shaft - 12 600 0.194 £44.91
AWM12-1000 Solid Shaft - 12 1000 0.323 £74.88
AWM12-2000 Solid Shaft - 12 2000 0.646 £149.79
AWM16-300 Solid Shaft - 16 300 0.172 £30.96
AWM16-600 Solid Shaft - 16 600 0.344 £61.94
AWM16-1000 Solid Shaft - 16 1000 0.573 £103.25
AWM16-2000 Solid Shaft - 16 2000 1.146 £206.51
AWM20-300 Solid Shaft - 20 300 0.269 £35.78
AWM20-600 Solid Shaft - 20 600 0.538 £71.60
AWM20-1000 Solid Shaft - 20 1000 0.896 £119.41
AWM20-2000 Solid Shaft - 20 2000 1.792 £238.81
AWM25-300 Solid Shaft - 25 300 0.423 £44.70
AWM25-600 Solid Shaft - 25 600 0.847 £89.45
AWM25-1000 Solid Shaft - 25 1000 1.411 £149.09
AWM25-2000 Solid Shaft - 25 2000 2.822 £298.21
AWM30-300 Hollow Shaft 15 30 300 0.605 £49.91
AWM30-600 Hollow Shaft 15 30 600 1.210 £99.16
AWM30-1000 Hollow Shaft 15 30 1000 2.016 £165.27
AWM30-2000 Hollow Shaft 15 30 2000 4.032 £330.57
AWM40-300 Hollow Shaft 20 40 300 0.810 £78.97
AWM40-600 Hollow Shaft 20 40 600 1.621 £157.97
AWM40-1000 Hollow Shaft 20 40 1000 2.701 £263.31
AWM40-2000 Hollow Shaft 20 40 2000 5.402 £526.65
AWM50-300 Hollow Shaft 28 50 300 1.152 £97.82
AWM50-600 Hollow Shaft 28 50 600 2.303 £195.65
AWM50-1000 Hollow Shaft 28 50 1000 3.839 £326.85
AWM50-2000 Hollow Shaft 28 50 2000 7.678 £652.19

Material
AlMgSi 0.5 F22

Performance
Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB.
Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: >40µm. Surface Hardness: 450-550 HV.
Roughness: Ra<0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: 2

Other Info.
For use with Igubal® Drylin™ Bearing:
RJUM05, RJUM06, OJUM06, RJZM01, RJUM01, OJUM01, TJUM01, TJUM03, JUM01.

Downloads
PDF Icon PDF Documents : Catalogue Page

Sign in, or register: Why register? | Forgot password?