T5001 : Carriages to suit T6001 Rail (Single Crown)
Linear » Linear Rails & Carriages »
T5001 : Linear Carriages to Suit T6001 (One Ball Crown Only)
An optimal run is obtained using 4 cursors shown opposite (2 on each rail).
It is advisable to assemble the system in a way that the load acting on the cursor is a radial (Fr).
The loads shown in the table are the minimum guaranteed ones.
| Discounts | 1+ 0% | 20+ 5% | 40+ 10% | 60+ 15% | 100+ 20% | 200+ 35% |
| Part Number Carriage Only |
Fr | Fa | Cost | Quantity | Add to Basket |
| T5001-03AF | 20 | 15 | £62.39 |
|
Material
Black anodised aluminium body. Plastic coated life long lubricated bearings with one ball crown.
Features
Modules are composed of a rail with C-profile, in which a carriage with three pins (adjustable central pin) slides.
This enables: easy assembly, compact dimensions, versatility, long life, quiet and smooth operation.
Infinite application possibilities.
The carriage clearance - different from most linear systems on the market - enables adjustment without the use of wrenches.
Sometimes even when load is applied to the carriage.
The rails and carriages are supplied with the most suitable adjustment in order to gain the features stated.
Suitable for anywhere problems have occured with light, low-speed motions and where no motion precision is required.
Eg: manual motion, light casings, accident prevention protections, doors.
You must order at least TWO carriages per rail (see T6001 page for corresponding rails).
Downloads
PDF Documents : Catalogue Page
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login