LS : Single Lip Wiper Seals
Linear » Linear Bearings »
LS : Single Lip Wiper Seals (to Suit Metric Bearings)
Note: LS wiper seals have a metric inside diameter and an inch outside diamater.
| Discounts | 1+ 0% | 20+ 5% | 40+ 10% | 60+ 15% | 100+ 20% | 200+ 35% |
| Part Number |
Shaft Size mm |
I.D. mm |
O.D. In. |
O.D. Tolerance Inches |
Seal Height Inches |
Cost | Quantity | Add to Basket |
| LS5 | 5 | 5 | 0.375" | 0.006/0.012" | 0.137" | £POA |
|
|
| LS8 | 8 | 8 | 0.531" | 0.006/0.012" | 0.137" | £POA |
|
|
| LS12 | 12 | 12 | 0.750" | 0.006/0.012" | 0.157" | £POA |
|
|
| LS16 | 16 | 16 | 0.906" | 0.006/0.012" | 0.157" | £POA |
|
|
| LS20 | 20 | 20 | 1.125" | 0.006/0.012" | 0.196" | £POA |
|
|
| LS25 | 25 | 25 | 1.375" | 0.006/0.012" | 0.236" | £POA |
|
|
| LS30 | 30 | 30 | 1.625" | 0.006/0.012" | 0.275" | £POA |
|
|
| LS40 | 40 | 40 | 2.218" | 0.008/0.014" | 0.312" | £POA |
|
|
| LS50 | 50 | 50 | 2.750" | 0.008/0.014" | 0.354" | £POA |
|
|
| LS60 | 60 | 60 | 3.250" | 0.008/0.014" | 0.398" | £POA |
|
|
| LS80 | 80 | 80 | 4.250" | 0.008/0.014" | 0.472" | £POA |
|
Material
Nitrile rubber NBR sh70±5, with fully encapsulated carbon steel support (AISI 1008/1010)
Options
Designed for light wiping action and low pressure
Downloads
PDF Documents : Catalogue Page
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login