• Deutsch
  • Español
  • Nederlands
  • Dansk
  • Suomi
  • Norsk
  • Svenska
  • Italiano

LB LBE : Linear Bearings With Seals

Linear » Linear Bearings »
LB & LBE Type : Linear Bearings With Seals - For Use With Linear Shafting

LB & LBE Linear Bearings Bushing for use with Linear Shafting

Discounts 1+ 0% 20+ 5% 40+ 10% 60+ 15% 100+ 20% 200+ 35%

Part
Number		 A Tol.
µm		 W ØG h h1 Deg.
Ecc.		 Max.
µm		 Ord.
kgf		 Max.
kgf		 Ord.
Kgf		 Max.
kgf		 Cost
(Closed)		 Quantity Add to
Basket		 Cost
(Adjustable)		 Quantity Add to
Basket		 Cost
(Open)		 Quantity Add to
Basket

CARBON STEEL

LBE5 12 0/+270 1.1 11.5 1.0 - - 12 10 10 18 18 £23.68
£26.22
- - -
LBE8 14 0/+270 1.1 15.2 1.0 - - 12 14 14 25 25 £24.31
£27.18
- - -
LBE12 20 0/+330 1.3 21.0 1.5 7.5 78 12 32 45 56 79 £24.62
£27.51
£30.38
LBE16 22 0/+330 1.3 24.9 1.5 10.0 78 12 35 49 58 82 £30.38
£33.59
£35.20
LBE20 28 0/+330 1.6 30.3 2.0 10.0 60 15 49 100 110 170 £32.63
£36.18
£40.95
LBE25 40 0/+390 1.85 37.5 2.0 12.5 60 15 120 180 200 290 £37.77
£41.61
£50.57
LBE30 48 0/+390 1.85 44.5 2.0 12.5 50 15 180 230 310 390 £51.85
£58.26
£64.01
LBE40 56 0/+460 2.15 59.0 3.0 16.8 50 17 310 400 490 620 £86.41
£94.45
£99.23
LBE50 72 0/+460 2.65 72.0 3.0 21.0 50 17 450 580 710 910 £108.83
£121.64
£128.06
LBE60 95 0/+400 3.15 86.5 3.0 27.2 54 20 490 630 820 1050 £267.58
£298.86
£325.87
LBE80 125 0/+400 4.15 116.0 3.0 36.3 54 20 910 1160 1450 1860 £557.21
£618.71
£694.39

STAINLESS STEEL 440C

LB5 12 0/+270 1.1 11.5 1.0 - - 12 7.0 7.0 12.6 12.6 £50.44
£56.99
- - -
LB8 14 0/+270 1.1 15.2 1.0 - - 12 4.9 4.9 17.5 17.5 £50.44
£56.99
- - -
LB12 20 0/+330 1.3 21.0 1.5 7.5 78 12 22.4 22.4 39.2 55.3 £50.44
£56.99
£63.70
LB16 22 0/+330 1.3 24.9 1.5 10.0 78 12 24.5 34.3 40.6 57.4 £76.46
£81.94
£82.14
LB20 28 0/+330 1.6 30.3 2.0 10.0 60 15 34.3 70.0 77.0 119.0 £95.00
£115.50
£123.71
LB25 40 0/+390 1.85 37.5 2.0 12.5 60 15 48.0 126.0 140.0 203.0 £197.82
£209.64
£214.66

Part
Number		 Shaft Ø
mm		 LBE-A Closed

LBE-B Adjustable

 LBE-C Open ØB Tol.
µm		 ØD Tol.
µm		 L Tol.
µm
Weight
g		 Ball
Circs.		 Weight
g		 Ball
Circs.		 Weight
g		 Ball
Circs.
LB5 / LBE5 5 10 4 9.5 4 - - 5 +8/-0 12 0/-8 22 0/-210
LB8 / LBE8 8 20 4 19.0 4 - - 8 +8/-0 16 0/-8 25 0/-210
LB12 / LBE12 12 41 4 40.0 4 32 3 12 +8/-0 22 0/-9 32 0/-250
LB16 / LBE16 16 56 4 54.5 4 44 3 16 +9/-1 26 0/-9 36 0/-250
LB20 / LBE20 20 92 5 90.0 5 75 4 20 +9/-1 32 0/-11 45 0/-250
LB25 / LBE25 25 220 6* 215.0 6* 181 5* 25 +11/-1 40 0/-11 58 0/-300
LBE30 30 325 6 320.0 6 272 5 30 +11/-1 47 0/-11 68 0/-300
LBE40 40 705 6 694.0 6 600 5 40 +13/-2 62 0/-13 80 0/-300
LBE50 50 1130 6 1110.0 6 970 5 50 +13/-2 75 0/-13 100 0/-350
LBE60** 60 2050 6 2000.0 6 1580 5 60 +13/-2 90 0/-15 125 0/-400
LBE80 80 5140 6 5100.0 6 4350 5 80 +16/-4 120 0/-15 165 0/-400

* Seals extrude a little from width of external cylinder
** Not available sealed.
1kgf = 9.807N = 2.205lbs. 1mm = 0.039inch.

Material
Balls and External Cylinder:
LBE: Hardened Steel.
LB: Hard Stainless Steel similar to 440C.
Ball Retainer: Resin.
Seals: Rubber.

Performance
Shaft Tolerance: h6 (Normal Fit) j6 (Closer Fit)
Housing Tolerance: H7 (Clearance Fit) J7 (Interference Fit)
Max Operating Temp: +100°C (intermittent) +80°C (continuous)

Other Info.
LBE60 & LBE80 are not sealed and are fitted with metal ball retainers.
Other sizes have resin retainers fitted as standard - metal retainers available on request, P.O.A.
For use with h6 Hard Linear Shafting Z--A Z--B 60 HRC
Steel ground & polished

Downloads
PDF Icon PDF Documents : Catalogue Page | Technical Page

Sign in, or register: Why register? | Forgot password?