LRM KSM Type : 2 Start Bronze & Steel Round Nuts
Linear » Leadscrews & Nuts »LRM & KSM Type : 2 Start Bronze & Steel Round Nuts : DIN 103-7H
| Discounts | 1+ 0% | 6+ 15% | 20+ 20% | 40+ 25% | 60+ 30% | 100+ 40% |
| Part Number |
Ød | Lead P |
ØD h11 | C | Nut Weight Kg |
Contact Surface mm2 |
Cost | Quantity | Add to Basket |
|
BRONZE | |||||||||
| LRM126 | 12 | 6 | 26 | 24 ±0.15 | 0.083 | 280 | £34.95 |
|
|
| LRM168 | 16 | 8 | 36 | 32 ±0.15 | 0.232 | 490 | £38.71 |
|
|
| LRM188 | 18 | 8 | 40 | 36 ±0.15 | 0.320 | 630 | £41.24 |
|
|
| LRM208 | 20 | 8 | 45 | 40 ±0.15 | 0.455 | 790 | £47.44 |
|
|
| LRM2210 | 22 | 10 | 45 | 44 ±0.15 | 0.480 | 940 | £105.35 |
|
|
| LRM2410 | 24 | 10 | 50 | 48 ±0.15 | 0.656 | 1130 | £51.24 |
|
|
| LRM2810 | 28 | 10 | 60 | 56 ±0.25 | 1.102 | 1570 | £119.70 |
|
|
| LRM3012 | 30 | 12 | 60 | 60 ±0.25 | 1.140 | 1780 | £120.73 |
|
|
| LRM3212 | 32 | 12 | 60 | 64 ±0.25 | 1.177 | 1910 | £139.94 |
|
|
| LRM3612 | 36 | 12 | 75 | 72 ±0.25 | 2.189 | 2610 | £164.21 |
|
|
| LRM4014 | 40 | 14 | 80 | 80 ±0.25 | 2.725 | 3210 | £188.65 |
|
|
|
STEEL | |||||||||
| KSM126 | 12 | 6 | 26 | 18 ±0.15 | 0.0628 | 210 | £32.88 |
|
|
| KSM168 | 16 | 8 | 36 | 24 ±0.15 | 0.0870 | 365 | £33.84 |
|
|
| KSM188 | 18 | 8 | 40 | 27 ±0.15 | 0.1325 | 470 | £34.46 |
|
|
| KSM208 | 20 | 8 | 45 | 30 ±0.15 | 0.1797 | 590 | £37.98 |
|
|
| KSM2210 | 22 | 10 | 45 | 33 ±0.15 | 0.1863 | 700 | £94.98 |
|
|
| KSM2410 | 24 | 10 | 50 | 36 ±0.15 | 0.2572 | 845 | £39.23 |
|
|
| KSM2810 | 28 | 10 | 60 | 42 ±0.25 | 0.3625 | 1175 | £98.69 |
|
|
| KSM3012 | 30 | 12 | 60 | 45 ±0.25 | 0.4913 | 1335 | £43.36 |
|
|
| KSM3212 | 32 | 12 | 60 | 48 ±0.25 | 0.6463 | 1430 | £115.91 |
|
|
| KSM3612 | 36 | 12 | 75 | 54 ±0.25 | 0.8359 | 1950 | £120.67 |
|
|
| KSM4014 | 40 | 14 | 80 | 60 ±0.25 | 0.8523 | 2400 | £125.21 |
|
|
Material
KSM: Carbon Manganese Steel S300 Pb (11 SMn Pb37)
LRM: Bronze CuSn8P
Other Info.
To be used with our trapezoidal leadscrews.
KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights.
LRM: Manual or powered control - low and medium rotational speeds - for working under load.
For power transmission and continuous use, always use bronze nuts, never steel.
Nuts and screws should always be lubricated with grease or oil.
Steel nuts should be used with steel screws for hand motion only.
Right hand thread supplied as standard
Downloads
PDF Documents : Catalogue Page | Technical Pages | Full Range of Trapezoidal Leadscrews (including Technical)
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login