LSM : 1 Start Stainless Rolled Leadscrews (LH & RH)
Linear » Leadscrews & Nuts »LSM Type : 1 Start Stainless Rolled Leadscrews (LH & RH) : DIN 103-7e - ISO 2902
| Discounts | 1+ 0% | 6+ 15% | 20+ 20% | 40+ 25% | 60+ 30% | 100+ 40% |
| Part
Number Right Hand |
Part
Number Left Hand |
ØD Nom. |
ØD Min. |
Pitch/ Lead P |
d2 Min. |
d2 Max. |
Helix Angle |
Ød3 Screw Min. |
Ød3 Screw Max. |
Efficiency (µ at 0.15) |
Screw Weight Kg/m |
Right Hand Cost 1m standard |
Quantity |
Add to Basket |
Left Hand Cost 1m standard |
Quantity |
Add to Basket |
| LSM123 | LSM123/LH | 12 | 11.76 | 3 | 10.19 | 10.42 | 5°17' | 7.69 | 8.50 | 37% | 0.65 | £39.14 |
|
£137.69 |
|
||
| LSM164 | LSM164/LH | 16 | 15.70 | 4 | 13.64 | 13.91 | 5°16' | 10.47 | 11.50 | 37% | 1.17 | £62.39 |
|
£193.14 |
|
||
| LSM184 | LSM184/LH | 18 | 17.70 | 4 | 15.64 | 15.91 | 4°36' | 12.47 | 13.50 | 34% | 1.53 | £77.00 |
|
£204.20 |
|
||
| LSM204 | LSM204/LH | 20 | 19.70 | 4 | 17.64 | 17.91 | 4°05' | 14.47 | 15.50 | 32% | 1.94 | £88.90 |
|
£204.20 |
|
||
| LSM245 | LSM245/LH | 24 | 23.66 | 5 | 21.09 | 21.39 | 4°17' | 17.27 | 18.50 | 33% | 2.78 | £130.01 |
|
£215.98 |
|
||
| LSM285 | LSM285/LH | 28 | 27.66 | 5 | 25.09 | 25.39 | 3°36' | 21.27 | 22.50 | 29% | 3.91 | £159.16 |
|
£231.51 |
|
||
| LSM306 | LSM306/LH | 30 | 29.63 | 6 | 26.55 | 26.88 | 4°05' | 21.56 | 23.00 | 32% | 4.36 | £176.21 |
|
£245.73 |
|
||
| LSM326 | LSM326/LH | 32 | 31.63 | 6 | 28.55 | 28.88 | 3°48' | 23.56 | 25.00 | 30% | 5.04 | £196.11 |
|
£259.39 |
|
||
| LSM366 | LSM366/LH | 36 | 35.63 | 6 | 32.55 | 32.88 | 3°20' | 27.56 | 29.00 | 28% | 6.55 | £213.17 |
|
£301.63 |
|
||
| LSM407 | LSM407/LH | 40 | 39.58 | 7 | 36.02 | 36.38 | 3°31' | 30.38 | 32.00 | 29% | 7.98 | £234.49 |
|
£648.89 |
|
||
| LSM508 | - | 50 | 49.55 | 8 | 45.47 | 45.87 | 3°11' | 39.17 | 41.00 | 26% | 12.70 | £424.93 |
|
- | - | - |
Material
Stainless Steel 316L (1.4404) (X2 CrNiMo17.12.2).
Performance
Guide - Torque to move nut:
Other Info.
Lengths: 1000mm Price Each 2000mm x 2 3000mm x 3
For power transmission and continuous use, always use bronze nuts, never steel.
Nuts and screws should always be lubricated with grease or oil.
Steel nuts should be used with steel screws for hand motion only.
Thread rolled Trapezoidals in steel toughened (still machinable).
To be used with our Trapezoidal nuts - 2 Start Leadscrews available
Special nuts can be made - please fax a drawing for a quote.
Efficiency Guide 20% with lubrication.
Downloads
PDF Documents : Catalogue Page | Technical Pages | Full Range of Trapezoidal Leadscrews (including Technical)
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login