Ondrives: Linear - Leadscrews & Nuts - SKM - 1 Start Steel Hexagon Nuts

SKM : 1 Start Steel Hexagon Nuts

Linear » Leadscrews & Nuts »
SKM Type : 1 Start Steel Hexagon Nuts - DIN 103-7H

SKM hexagon trapezoidal nuts

Discounts

1+ 0%

6+ 15%

20+ 20%

40+ 25%

60+ 30%

100+ 40%

Part Number RH	Part Number LH	Ød	p	sw h11	C	Nut Weight Kg	Contact Surface mm²	Cost RH	Quantity	Add to Basket	Cost LH	Quantity	Add to Basket
SKM102	SKM102/LH	10	2	17	15^±0.015	0.0219	150	£3.27			£4.59
SKM123	SKM123/LH	12	3	19	18^±0.015	0.0319	210	£3.68			£5.16
SKM143	SKM143/LH	14	3	22	21^±0.015	0.0488	285	£4.35			£6.10
SKM164	SKM164/LH	16	4	24	24^±0.015	0.0649	365	£4.97			£6.95
SKM184	SKM184/LH	18	4	27	27^±0.015	0.0912	470	£5.85			£8.21
SKM204	SKM204/LH	20	4	30	30^±0.015	0.1236	590	£6.43			£9.01
SKM225	SKM225/LH	22	5	30	33^±0.015	0.1245	700	£7.20			£10.09
SKM245	SKM245/LH	24	5	36	36^±0.015	0.2192	845	£8.52			£11.93
SKM285	SKM285/LH	28	5	41	42^±0.025	0.3181	1175	£13.15			£18.43
SKM306	SKM306/LH	30	6	46	45^±0.025	0.4450	1335	£16.04			£22.48
SKM326	SKM326/LH	32	6	50	48^±0.025	0.5668	1430	£19.19			£26.90
SKM366	SKM366/LH	36	6	55	54^±0.025	0.7078	1950	£22.42			£31.39
SKM407	SKM407/LH	40	7	60	60^±0.025	0.8927	2400	£33.73			£47.24
SKM447	-	44	7	65	66^±0.025	1.5378	2940	£46.19			-	-	-
SKM508	-	50	8	75	75^±0.025	1.8894	3790	£120.18			-	-	-
SKM609	-	60	9	90	90^±0.025	3.2773	5490	£195.94			-	-	-
SKM701	-	70	10	100	100^±0.025	4.1932	7140	£249.94			-	-	-

Material
Carbon Manganese Steel S300 Pb (11 SMn Pb37)

Other Info.
Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights.
For power transmission and continuous use, always use bronze nuts, never steel.
Nuts and screws should always be lubricated with grease or oil.
Steel nuts should be used with steel screws for hand motion only.
It is possible to weld SKM type but difficulties may arise with bubbling due to sulphur content.

Downloads
PDF Documents : Catalogue Page | Technical Pages | Full Range of Trapezoidal Leadscrews (including Technical)