Ondrives: Linear - Leadscrews & Nuts - VKM - 1 Start Steel Square Nuts

VKM : 1 Start Steel Square Nuts

Linear » Leadscrews & Nuts »
VKM Type : 1 Start Steel Square Nuts - DIN 103-7H

VKM square trapezoidal nuts

Discounts

1+ 0%

6+ 15%

20+ 20%

40+ 25%

60+ 30%

100+ 40%

Part Number Square RH	Part Number Square LH	Ød	p	D h11	C	Nut Weight Kg	Contact Surface mm²	Cost RH	Quantity	Add to Basket	Cost LH	Quantity	Add to Basket
VKM102	VKM102/LH	10	2	17	15^±0.15	0.0265	150	£4.55			£6.37
VKM123	VKM123/LH	12	3	25	18^±0.15	0.0760	210	£4.55			£6.36
VKM143	VKM143/LH	14	3	25	20^±0.15	0.0788	285	£5.02			£7.02
VKM164	VKM164/LH	16	4	28	24^±0.15	0.1187	365	£6.24			£8.75
VKM184	VKM184/LH	18	4	30	28^±0.15	0.1536	470	£8.10			£11.34
VKM204	VKM204/LH	20	4	35	30^±0.15	0.2585	590	£9.17			£12.83
VKM225	VKM225/LH	22	5	35	33^±0.15	0.2399	700	£10.08			£14.13
VKM245	VKM245/LH	24	5	40	36^±0.15	0.3542	845	£11.82			£16.56
VKM285	VKM285/LH	28	5	45	42^±0.25	0.5058	1175	£16.41			£23.01
VKM306	VKM306/LH	30	6	45	45^±0.25	0.5130	1335	£17.53			£24.58
VKM326	VKM326/LH	32	6	55	48^±0.25	0.8909	1430	£25.84			£36.20
VKM366	VKM366/LH	36	6	60	54^±0.25	1.1634	1950	£38.00			£53.20
VKM407	VKM407/LH	40	7	60	60^±0.25	1.2162	2400	£46.34			£64.88

Material
Carbon Manganese Steel S300 Pb (11 SMn Pb37)
It is possible to weld this material but difficulties may arise with bubbling due to the sulphur content.

Other Info.
For power transmission and continuous use, always use bronze nuts, never steel.
Nuts and screws should always be lubricated with grease or oil.
Steel nuts should be used with steel screws for hand motion only.
Manual control - Low Rotation Speeds - For clamping or locking functions - For receiving dead weights.

Downloads
PDF Documents : Catalogue Page | Technical Pages | Full Range of Trapezoidal Leadscrews (including Technical)