Ondrives: Linear - Leadscrews & Nuts - LKM - 1 & 2 Start Round Nylon Nuts

LKM : 1 & 2 Start Round Nylon Nuts

Linear » Leadscrews & Nuts »
LKM Type : 1 & 2 Start Round Nylon Nuts : DIN 103

Discounts

1+ 0%

6+ 15%

20+ 20%

40+ 25%

60+ 30%

100+ 40%

Part Number RH	Part Number LH	Lead P	D	C	Ød	Contact Surface mm²	Cost RH	Quantity	Add to Basket	Cost LH	Quantity	Add to Basket
1 Start
LKM123	LKM123/LH	3	26	24	12	280	£14.15			£19.82
LKM164	LKM164/LH	4	36	32	16	490	£18.50			£25.85
LKM204	LKM204/LH	4	45	40	20	790	£25.47			£35.85
LKM245	LKM245/LH	5	50	48	24	1130	£33.62			£45.61
LKM306	LKM306/LH	6	60	60	30	1780	£48.60			£65.64
LKM366	LKM366/LH	6	75	72	36	2610	£56.81			£76.22
LKM407	LKM407/LH	7	80	80	40	3210	£87.78			£117.63
LKM508	LKM508/LH	8	90	100	50	5060	£182.21			£240.51
2 Start
LKM126	-	6	26	24	12	280	£19.82			-	-	-
LKM168	-	8	36	32	16	490	£25.85			-	-	-
LKM208	-	8	45	40	20	790	£35.85			-	-	-
LKM2410	-	10	50	48	24	1130	£45.61			-	-	-
LKM3012	-	12	60	60	30	1780	£65.64			-	-	-
LKM3612	-	12	75	72	36	2610	£76.22			-	-	-
LKM4014	-	14	80	80	40	3210	£117.63			-	-	-

Material
Black Nylon 6.6

Performance
Wear Measured by Weight Reduction:
1.94wt.-% (Nylon), 2.08wt.-% (Delrin)

Test Conditions
Load Direction: Horizontal Shaft Material: Stainless Steel Load: 10kg
Speed: 300Rpm Cycles: 10,000 Stroke: 160mm Lubrication: None

Other Info.
Maintenance free. Support higher loads. Dry running. Dirt resistance.
Manual or powered control. Medium and high rotation speeds. For working under moderate load.
Very low sound level. Use with steel or stainless steel screws gives very good results.
May be used without lubrication but will result in reduced service life.

Downloads
PDF Documents : Catalogue Page | Technical Pages | Full Range of Trapezoidal Leadscrews (including Technical)