Ondrives: Linear - Leadscrew & Ballscrew Actuators - 2HB - AccuSlide

2HB : AccuSlide 5-20mm Pitch 85-1165mm Strokes

Linear » Leadscrew & Ballscrew Actuators »
2HB : AccuSlide (Backlash-Free, High Stiffness Assembly)

Material:
•Body: Anodised Aluminium
•Shaft/Ballscrew: Screwed Hard Steel (Pre-loaded nut Backlash-free)

Maximum Stroke Length is determined by subtracting the carriage length (T1) and 2x end block length (L3) from the total system length (L).

Used in continuously supported applications when stiffness and rigidity is required.

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Numbers NEMA 23 Input 10 Series (medium duty)		Standard Lengths	Max Stroke Lengths	5mm Pitch			10mm Pitch
5mm Pitch	10mm Pitch	Standard Lengths	Max Stroke Lengths	Cost	Quantity	Add to Basket	Cost	Quantity	Add to Basket
2HB-10G-300	2HB-10H-300	300	175	£3635.56			£3635.56
2HB-10G-375	2HB-10H-375	375	250	£3748.03			£3748.03
2HB-10G-450	2HB-10H-450	450	325	£3860.53			£3860.53
2HB-10G-525	2HB-10H-525	525	400	£3973.01			£3973.01
2HB-10G-600	2HB-10H-600	600	475	£4085.54			£4085.48
2HB-10G-675	2HB-10H-675	675	550	£4197.95			£4197.95
2HB-10G-750	2HB-10H-750	750	625	£4310.43			£4310.43
2HB-10G-825	2HB-10H-825	825	700	£4422.90			£4422.90
2HB-10G-900	2HB-10H-900	900	775	£4535.38			£4535.38
2HB-10G-975	2HB-10H-975	975	850	£4647.84			£4647.84

10 Series (Medium Duty)
Note: Increments of 75mm are available for longer lengths. Maximum length is 1000mm.

20 Series (Heavy Duty)
Note: Increments of 120mm are available for longer lengths. Maximum length is 3000mm. Special lengths for both series, to your specification, exceeding the maximum length are available but may require butt joints.

Discounts

1+ 0%

20+ 5%

40+ 10%

60+ 15%

100+ 20%

200+ 35%

Part Numbers NEMA 34 Input 20 Series (heavy duty)			Standard Lengths	Max Stroke Lengths	5mm Pitch			10mm Pitch			20mm Pitch
5mm Pitch	10mm Pitch	20mm Pitch	Standard Lengths	Max Stroke Lengths	Cost	Quantity	Add to Basket	Cost	Quantity	Add to Basket	Cost	Quantity	Add to Basket
2HB-20L-325	2HB-20M-325	2HB-20N-325	325	85	£POA			£POA			£POA
2HB-20L-445	2HB-20M-445	2HB-20N-445	445	205	£6106.75			£6106.75			£6106.75
2HB-20L-565	2HB-20M-565	2HB-20N-565	565	325	£6354.84			£6354.84			£6354.84
2HB-20L-685	2HB-20M-685	2HB-20N-685	685	445	£6602.96			£6602.96			£6602.96
2HB-20L-805	2HB-20M-805	2HB-20N-805	805	565	£6851.05			£6851.05			£6851.05
2HB-20L-925	2HB-20M-925	2HB-20N-925	925	685	£7099.17			£7099.17			£7099.17
2HB-20L-1045	2HB-20M-1045	2HB-20N-1045	1045	805	£7347.30			£7347.30			£7347.30
2HB-20L-1165	2HB-20M-1165	2HB-20N-1165	1165	925	£7595.40			£7595.40			£7595.40
2HB-20L-1285	2HB-20M-1285	2HB-20N-1285	1285	1045	£7843.48			£7843.48			£7843.48
2HB-20L-1405	2HB-20M-1405	2HB-20N-1405	1405	1165	£8091.60			£8091.60			£8091.60

AccuSlide™ 2HB System with Integral Ball Screw Assembly and T-Slot Carriage

Technical Criteria

NEMA 23 Motor Fitting Part Number

NEMA 34 Motor Fitting Part Number

2HB–10G–XXX

2HB–10H–XXX

2HB–20L–XXX

2HB–20M–XXX

2HB–20N–XXX

Nominal Dia.

Ball Screw (Dia. x Lead)

16 x 5P

16 x 10P

25 x 5P

25 x 10P

25 x 25P

Accuracy mm/300mm

0.025

Repeatability

±0.005

B	H4	D6
B1	K Central	D7
B2	M	D8
B3	M1	B6
B9	N	B7
C3	N1	H
F	L3	H1
G	L4	H6
H	L5	H9
H1	T1	T
H2	D5

100	60	6.0
60	35	3
70	70	2.5
60	15	70
105	70	15
47.15	15	60
M5	12.5	31
M5	70	15
60	26.5	13
31	100	100
61	10.5

200	88	8.1
88	85	6
145	145	4
88	27.5	155
205	145	22.5
69.6	27.5	90
M10	20	45
M8	105	22.5
90	40	20
45	200	200
89	16.5

Base Mounting Holes X

120

Base Mounting Holes Y

37.5

42.5

Max Stroke Length

L-125

L-240

XXX = Standard Length (L) - See below

Features
•Double acting seals
•Speeds up to 1m/s
•1 double ProfileRail™ system assembly
•1 carriage with 4 mounting holes
•1 integral ballscrew assembly
•Repeatability as low as 0.01mm
•Positioning accuracy is 0.025/300mm
•Standard motor mounting
•Long travel life capability
•Low profile & compact
•Coupling required for connection to ballscrew shaft

Options
•Protective bellows
(2 per slide needed, shortens stroke)
•Lubrication system